0217665-D.pdf

DWG. NO.

SH

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

REVISIONS

ZONE LTR DATE APPROVEDDESCRIPTIONSTATUS

REVISIONSH2 1

REVD

12345678

A

B

C

D

E

F

A

C

D

E

F

8 7 6 5 4 3 2 1

55910 F SIZE - ASME Y14.100, REV 3-2003

SHEET 1 OF 3

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; 2004/01/20.

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR EXECUTIVE

ORDER 12470. VIOLATORS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL

PENALTIES.

D-XXXXX

COGNIZANT CODE

0221028

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE WITH ASME

Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

AS-4773/U

F

THIRD ANGLE PROJECTION

RADOME, CSA

0217665

FILE DATE: 2018/09/07 FILE NAME: 0217665_D_Radome.dft

-1

QTY REQD

CAGE CODE PART OR IDENTIFYING NUMBER DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG

FIND

NO.

PARTS LIST

RADOME 11 2

A

-1

A

D. ARNEY 2007/05/10

NA D REDRAWN WITH CHANGE

NOTES:

1 MATERIAL: PREPREG, EPOXY RESIN PER MIL-R-9300B, TYPE 1.

FIBERGLASS CLOTH, PER MIL-C-9084, STYLE 7781. FIBERCOTE, E761-7781.

2 MATERIAL: HONEYCOMB, ARAMID FIBER, 3/16" CELL,

OVEREXPANDED, 4.0 LBS/FT³. 7/16" THICK.

3. MATERIAL: G-10 FIBERGLASS PER MIL-I-24768/27.

4 . ALL OUTSIDE SURFACES, EXPOSED TO THE WEATHER, SHALL BE FINISHED WITH FOUR COATS TOTAL OF PAINT IAW A THROUGH C BELOW:

A. FIRST COAT: PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE III IAW MIL-DTL-24441 AND MIL-P-24441/20A (0.003" TO 0.004" DRY FILM THICKNESS).

B. SECOND COAT: PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE III IAW MIL-DTL-24441 AND MIL-DTL-24441/20A (0.002" TO 0.003" DRY FILM THICKNESS).

C. THIRD AND FOURTH COAT: POLYURETHANE, AIRCRAFT AND SUPPORT EQPT IAW MIL-PRF-85285D, TYPE III, COLOR 26270 (HAZE GRAY) IAW FED-STD-595 (0.001" TO 0.0015" DRY FILM THICKNESS). THE TOTAL DRY FILM THICKNESS SHALL BE 0.007" TO 0.010" THICK.

31.57

A

O 27.628

O 26.875

O .219 +.006

-.00224X EQ SP

l .014 M A B

30.42

100°

B

B

B

A

DWG. NO.

SH

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

REVISIONS

ZONE LTR DATE APPROVEDDESCRIPTION

12345678

A

B

C

D

E

F

A

C

D

E

F

8 7 6 5 4 3 2 1

55910 F SIZE - ASME Y14.100, REV 3-2003

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

F 0217665

FILE DATE: 2018/09/07 FILE NAME: 0217665_D_Radome.dft

SCALE: 2:1

DETAIL A

2:1

4.310

6.310

R .125

.310

R .065

.090

.060 .50

1.410

DWG. NO.

SH

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES

SHALL ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

REVISIONS

ZONE LTR DATE APPROVEDDESCRIPTION

12345678

A

B

C

D

E

F

A

C

D

E

F

8 7 6 5 4 3 2 1

55910 F SIZE - ASME Y14.100, REV 3-2003

SHEET 3

55910

DRAWING NUMBERCAGE CODESIZE

F 0217665

FILE DATE: 2018/09/07 FILE NAME: 0217665_D_Radome.dft

SECTION B-B

13.923O

24.809O

30.149

R .125

30.274

NA A REDRAWN WITH CHANGE