A1.5 DRAWINGS.pdf

FILE DATE: 2018/05/02 FILE NAME: 243543_-_18 IN RAIL WELDMENT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243543

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243551

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL WLDMNT

0243543

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 7,400 LBS

1. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

3. WELD THE BULKHEADS, CLEVIS PLATES, CLEVIS ASSEMBLIES AND GUSSETS TO THE W18 X106 I BEAM.

4. FINISH: SAND BLAST STRUCTURE AND APPLY ONE COATS OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY). MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

2 55910 0243548 - 18 IN RAIL MOD GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 5

2 55910 0235024 - DOUBLE CLEVIS WELDMENT STEEL SEE 235024 DRAWING FOR DETAILS 4

4 55910 0243544 - 18 IN RAIL CLEVIS PLTE STEEL, STRUCTURAL 50KSI OR BETTER 3

2 55910 0243541 - 18 IN RAIL BULKHD STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0243542 - W18 X 106 I BEAM 65FT STEEL, STRUCTURAL A992 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/05/02 FILE NAME: 243543_-_18 IN RAIL WELDMENT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243543

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243543

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE FEB 2018

A

A SECTION A-A115.884X u .125

3/8

4 CLEVIS PLATES

3.10 +.00 -.124X

3/8

2 CLEVIS ASSEMBLIES

65-2.25

1/2

2 BLKHDS

3.002X.9122X u .06

B

DETAIL B

1.002X u .03

6.152X u .125

I BEAM AND BLKHD

ARE FLUSH

3.52

3/8

2 GUSSETS

3/8

2 GUSSETS

FILE DATE: 2018/05/01 FILE NAME: 243542_-_W18 X 106 I BEAM 65FT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243542

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

W18 X 106 I BEAM

X 65 FT LONG

0243542

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 7,000 LBS

1. W18X106 STEEL WIDE FLANGE IBEAM, ASTM A992 65 FT LONG CONTINUOUS SECTION.

2. THE PREVIOUSLY USED SECTIONS OF RAIL I BEAM WITH THE HOLE PATERN IN THEM ARE AVAILABLE TO VENDER FOR USE AS A TEMPLATE.

3. FINISH: NONE

18.73 NOM

11.2 NOM

.940

282.02X u .05

(23 FT 6 IN)

7.010X u .03

24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03

2.110X u .03 O 1.43820X

780.0 NOM

(65 FT)

FILE DATE: 2018/03/06 FILE NAME: 243541_-_18 IN RAIL END BULKHD.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243541

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL END BULKHD

0243541

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 90 LBS

1. 50KSI STEEL PLATE, 1.125 IN THK (STOCK MATERIAL CAN BE USED)

2. FINISH: NONE

13.25

22.25

2.504X

10.754X

1.8752X u .03

6.1252X u .03

13.3752X u .03

18.8752X u .03

1.125 NOM

4X .5 CHAMFER

REFERENCE ONLY

O 1.3128X

55910 D SIZE - ASME Y14.100, REV 6-200

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235024

SHEET 1 OF 2

56410

COGNIZANT CODE

0243538

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

DOUBLE CLEVIS WELDMNT

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.

SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

K.HANSEN FEB2016

N. NGUYEN JUN2017

TPICKERING 29JUN2017

-0235024

NOTES:

1. DOUBLE CLEVIS WELDMENT , 50KSI STEEL

2. WELDS MUST GO COMPLETELY AROUND MATING PARTS TO PREVENT WATER

PENETRATION BETWEEN SURFACES.

3. NO FINISH

1 55910 0235197 1 DOUBLE CLEVIS ASSY GUSSET 50 KSI STEEL 3

2 55910 0235176 1 CLEVIS ROUND 2IN DIA 50 KSI STEEL 2

1 55910 0235022 1 DOUBLE CLEVIS PLATE 50 KSI STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

2X0.375

55910 D SIZE - ASME Y14.100, REV 6-2004

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235024

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235024

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -FEB2016--

REV

0.75 u.03

5.25 u.03

0.38 u.03 2X

4.188

.375

FILE DATE: 2018/05/01 FILE NAME: 243548_-_18 IN RAIL MOD GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243548

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL MOD GUSSET

0243548

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

0243543

TPICKERING

0243538

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 6 LBS

1. 50KSI STEEL PLATE, 1.00 IN THK (NOMINAL)

2. FINISH: NONE

6.50

3.12

.25

.75

.25

.75

1.00

FILE DATE: 2018/03/06 FILE NAME: 243544_-_18 IN RAIL CLEVIS PLTE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243544

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL CLEVIS PLTE

0243544

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 20 LBS

1. 50KSI STEEL PLATE, 1.0 IN THK (NOM)

2. FINISH: NONE

1.0 NOM

10.875 u .03

1.5 u .03

O 1.5 +.05 +.00

5.125 u .03

R 3.625 u .03

37°

8.75

7.25

FILE DATE: 2017/08/02 FILE NAME: 235176_1_ CLEVIS ROUND 2IN DIA .dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235176

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420

COGNIZANT CODE125

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

0235176

J. CALDWELL 13APR2017

2017/08/02.

REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

02351220235024

CLEVIS, ROUND 2 IN

DIAMETER

- INITIAL RELEASE 13APR2017

KHANSEN 20JUN2017

TPICKERING 24JUN2017

WEIGHT: 15.1 LB

B. WIEDEMEIER 02MAY2017

1 UPDATED NOTES, ADJUSTED FONTS 03MAY2017

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

3D VIEW - REF ONLY

SCALE 1:1

1.0 (STK)

8.62 u .19

81°2X (REF)

4.75

R 3.50 u .19

O 2.000

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50KSI OR STRONGER, 1 INCH THICK.

2. WEIGHT: 15.1 LBS.

3. FINISH: NONE.

+.015 -.001

4.31 u .19

FILE DATE: 2019/03/16 FILE NAME: 235197_1_ DOUBLE CLEVIS ASSY GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235197

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420

COGNIZANT CODE125

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 2/1

D

THIRD ANGLE PROJECTION

0235197

J. CALDWELL 17APR2017

2019/03/16.

REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

02351220235024

DOUBLE CLEVIS ASSEMBLY

GUSSET

- INITIAL RELEASE 17APR2017

KHANSEN 22JUNE2017

TPICKERING 24JUN2017

WEIGHT: 3.0 LB

B. WIEDEMEIER 02MAY2017

1 UPDATED NOTES, ADJUSTED FONTS 03MAY2017

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

3D VIEW - REF ONLY

SCALE 2:1

1.0 (STK)

3.50 +.00 -.13

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI OR STRONGER, 1 INCH THICK.

2. WEIGHT: 4.0 LBS.

3. FINISH: NONE.

3.00 u .19

FILE DATE: 2019/03/19 FILE NAME: 235022_1_ DOUBLE CLEVIS PLATE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235022

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420

COGNIZANT CODE125

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

0235022

J. CALDWELL 13APR2017

2019/03/19.

1 REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

2351220235024 DOUBLE CLEVIS PLATE

- INITIAL RELEASE 24APR2017

KHANSEN

B. WIEDEMEIER

22JUN2017

02MAY2017

TPICKERING 24JUN2017

WEIGHT: 18.6 LB

1 UPDATED NOTES, ADJUSTED FONTS 03MAY2017

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50KSI OR STRONGER 1 INCH THICK.

2. WEIGHT: 18.5 LBS.

3D VIEW - REF ONLY

SCALE 1:1

9.38 u .19

1.0 STK

7.00 u .19