Technical Drawings.pdf

PDF 1 MB Posted Mar 18, 2019

Attached to: NAVSIM Custom Cables Federal contract opportunity
Solicitation number: N66001-19-Q-6157
Issued by: Department of the Navy Information Warfare Systems Command

View the file

Other files for this federal contract opportunity

Other files attached to NAVSIM Custom Cables, newest first.
File	Type	Posted
Requirement List.pdf	PDF	Mar 18, 2019

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E011

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E011-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 MS3476W14-12PW

PLUG, ELECTRICAL CONNECTOR,

12-SOCKET, CRIMP-CONTACT, SHELL

SIZE=14

1 EA 2 81349 M85049/52-1-14W

BACKSHELL, ELECTRICAL CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

LABEL, MARKING

34 2 1

2 1

REVISION HISTORY

SEE SHEET 1

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E011 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER A MARKER B MARKER C LENGTH

W011

28687-829E011-1

W011

P1(NAVSIM)

W011

P11 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

SOCKET A

MARKER C MARKER A

MARKER B

W011

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E013

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E013-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 MS3476W14-12PX

PLUG, ELECTRICAL CONNECTOR,

12-SOCKET, CRIMP-CONTACT, SHELL

SIZE=14

1 EA 2 81349 M85049/52-14W

BACKSHELL, ELECTRICAL CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

SEE SHEET 1

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E013 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER A MARKER B MARKER C LENGTH

W013

28687-829E013-1

W013

P1(NAVSIM)

W013

P13 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

SOCKET A

MARKER C MARKER A

MARKER B

W013

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E014

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E014-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 MS3476W14-12P

PLUG, ELECTRICAL CONNECTOR,

12-SOCKET, CRIMP-CONTACT, SHELL

SIZE=14

1 EA 2 81349 M85049/52-1-14W

BACKSHELL, ELECTRICAL CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E014 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER A MARKER B MARKER C LENGTH

W014

28687-829E014-1

W014

P1(NAVSIM)

W014

P14 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

SOCKET A

MARKER C MARKER A

MARKER B

W014

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-09-18

CHK

ENGR B. MADER 2016-09-18

ENGR C. PINKLEMAN 2016-09-18

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY, SYNCHRO-IN,

EM LOG/WIND

829E015

SCALE: NONE SHEET 1 OF 3

DWG NOCAGE CODE

28687

SIZE

REV

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

ALL SHEETS ARE THE SAME

REVISION STATUS

NOTES – UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

6 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION

ON MARKER SHOWN. LOCATE AT APPROXIMATE CENTER

OF CABLE

7 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

8 PART NUMBER SHOULD APPEAR AT LEAST ONE TIME IN

ANY 6' SEGMENT OF CABLE. EXACT QUANTITY AND

LOCATION OF PART NUMBER MARKING BANDS SHALL BE

DETERMINED BY MANUFACTURING

9 CABLE SHIELD SHALL BE CUT BACK AND INSULATED

PART NUMBER: 829E015-1

AR AR 14 61626 PS-750-2-WHT

LABEL, MARKING

AR AR 13 0X4C9 EXPANDO FR-1/2

SLEEVING, BRAID, EXPANDABLE,

.500" DIA

AR AR 12 81349 M23053/5-109-0

HEAT SHRINK TUBING, 0.750 DIA,

POLYOLEFIN

SAE AMS-DTL-23053/5

AR AR 11 81349 M23053/5-108-0

HEAT SHRINK TUBING, 0.500 DIA,

POLYOLEFIN

SAE AMS-DTL-23053/5

12 EA 10 81349 M81824/1-1

SPLICE, WIRE, W/SEALING SLEEVE

AR AR 9 81349 M22759/43-22-0

WIRE, ELECTRICAL, 22 AWG, BLK

AR AR 8 81349 M22759/43-22-9

WIRE, ELECTRICAL, 22 AWG, WHT

AR AR 7 81349 M27500-24RC3S09

CABLE, 24 AWG LSZH

NEMA WC 27500

2 EA 6 81349 MS25036-103

TERMINAL, LUG

2 EA 5 81349 M85049/52-22W

STRAIN RELIEF, STRAIGHT, SHELL

SIZE=22

SAE AS85049/52

1 EA 4 96906 MS3476W22-21SW

PLUG, CRIMP-CONTACT, SHELL

SIZE=22

MS3470

1 EA 3 96906 MS3476W22-21S

PLUG, CRIMP-CONTACT, SHELL

SIZE=22

MS3470

1 EA 2 00779 5745082 BACKSHELL

1 EA 1 00779 M24308/4-15

PLUG, HD-78P

QTY UOM

FIND

CAGE

CODE

PART NUMBER

DESCRIPTION

SPECIFICATION

PARTS LIST

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E015 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

PART NUMBER MARKER A MARKER B MARKER C MARKER D LENGTH E LENGTH F LENGTH G

829E015-1

W015

28687-829E015-1 REV

W015

P1 (NAI D TO S)

W015

J412 (GPNTS)

W015

J15 (GPNTS)

36.0 +2.0/

-0.0

432.0 +3.0/

-0.0

12.0 +1.0/

-0.0

TABLE 1

LENGTH E LENGTH G 2X

P412

P15

PIN A

14 14

MARKER B

MARKER A

MARKER C

MARKER D

6 x2

LENGTH

34 2 1

4 2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 3

REV

NONE

829E015

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

WHITE

BLUE

ORANGE

BLUE

WHITE

ORANGE

WHITE

BLUE

ORANGE

WHITE

BLUE

ORANGE

WHITE

BLUE

ORANGE

WIND DIRECTION 1X (360 DEG/REV)

WIND SPEED 1X (100 KNTS/REV)

OSS 1X (100 KNOTS/REV)

OSS 10X (100 KNOTS/REV)

N/C

P412

P15

REF 115VAC R1 400HZ

REF 115VAC R2 400HZ

REF 115VAC R1 400HZ

REF 115VAC R2 400HZ

BLUE

WHITE

ORANGE

N/C

CH3-S1

CH3-S2

CH3-S3

CH1-REFH

CH1-REFL

CH2-S1

CH2-S2

CH2-S3

CH3-S1

CH3-REFH

CH3-REFL

CH4-S1

CH4-S2

CH4-S3

5, 26, 2, 23, 8, 29

44, 65, 41, 62, 47, 68

CH1-REFH

CH1-REFL

9 x12

BLK PHASE 1

WHT N

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E141

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E141-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 MS3476W16-23PW

PLUG, ELECTRICAL CONNECTOR,

23-PIN, CRIMP-CONTACT, SHELL

SIZE=16

1 EA 2 81349 M85049/52-16W

BACKSHELL, ELECTRICAL CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP,

1 EA 4 ODSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E141 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

W141

MARKER A MARKER B MARKER C LENGTH

W141

28687-829E141-1

W141

P1(NAVSIM)

W141

P141 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E171

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E171-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 M28840/16AB1S1

PLUG, ELECTRICAL CONNECTOR,

12-CONTACT, CRIMP-CONTACT, SHELL

SIZE=13

1 EA 2 81349 M28840/1BW

STRAIN RELIEF, ELECTRICAL

CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP,

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E171 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

W171

MARKER A MARKER B MARKER C LENGTH

W171

28687-829E171-1

W171

P1(NAVSIM)

W171

P171 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY

829E331

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

PART NUMBER: 829E331-1

-4 -3 -2 -1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY QTY QTY QTY

1 1 1 1 EA 1 14949 PL74-7

PLUG, TRB, TWINAX/TRIAX, 2-LUG, FOR

TRC-50-2 CABLE

1 1 1 1 EA 2 3URN9 PL803-7

PLUG, TRIAX, 3-LUG

AR AR AR AR 3 14949 TRC-50-2

CABLE, TRIAX, 50 OHM

AR AR AR AR 4 89093 PS-375-2-WT

LABEL, MARKING

NOTES – UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

6 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION

ON MARKER SHOWN. LOCATE AT APPROXIMATE CENTER

OF CABLE

7 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

8 PART NUMBER SHOULD APPEAR AT LEAST ONE TIME IN

ANY 6' SEGMENT OF CABLE. EXACT QUANTITY AND

LOCATION OF PART NUMBER MARKING BANDS SHALL BE

DETERMINED BY MANUFACTURING

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E331 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER B MARKER CMARKER A

TABLE 1

PART NUMBER MARKER A MARKER B MARKER C LENGTH

829E331-1

W331

28687-829E331-2

W331

P331 (GPNTS)

W331

P1 (NAVSIM)

480.0 +3.0/

-0.0

829E331-2

W332

28687-829E331-3 REV

W332

P332 (GPNTS)

W332

P2 (NAVSIM)

480.0 +3.0/

-0.0

829E331-3

W333

28687-829E331-4 REV

W333

P333 (GPNTS)

W333

P3 (NAVSIM)

480.0 +3.0/

-0.0

829E331-4

W334

28687-829E331-5 REV

W334

P334 (GPNTS)

W334

P4 (NAVSIM)

480.0 +3.0/

-0.0

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E343

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E343-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 M28840/16AB1S1

PLUG, ELECTRICAL CONNECTOR,

12-CONTACT, CRIMP-CONTACT, SHELL

SIZE=13

1 EA 2 81349 M28840/1BW

STRAIN RELIEF, ELECTRICAL

CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E343 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

MARKER A MARKER B MARKER C LENGTH

W343

28687-829E343-1

W343

P1 (NAVSIM)

W343

P343 (GPNTS)

480.0 +3.0 /-0.0

TABLE 1

W343

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E344

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E344-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 M28840/16AB1S1

PLUG, ELECTRICAL CONNECTOR,

12-CONTACT, CRIMP-CONTACT, SHELL

SIZE=13

1 EA 2 81349 M28840/1BW

STRAIN RELIEF, ELECTRICAL

CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E344 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

MARKER A MARKER B MARKER C LENGTH

W344

28687-829E344-1

W344

P1 (NAVSIM)

W344

P343 (GPNTS)

480.0 +3.0/-0.0

TABLE 1

W344

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E346

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E346-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 M28840/16AB1S1

PLUG, ELECTRICAL CONNECTOR,

12-CONTACT, CRIMP-CONTACT, SHELL

SIZE=13

1 EA 2 81349 M28840/1BW

STRAIN RELIEF, ELECTRICAL

CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E346 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

MARKER A MARKER B MARKER C LENGTH

W346

28687-829E346-1

W346

P1 (NAVSIM)

W346

P346 (GPNTS)

480.0 +3.0/-0.0

TABLE 1

W346

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DWN R. TRANCHANT 2016-08-29

ENGR B. MADER 2016-08-30

ENGR C. PINKLEMAN 2016-08-30

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

CONTRACT NO

TITLE

CABLE ASSEMBLY,

SERIAL, GCCS-M

829E347

SCALE: NONE SHEET 1 OF 2

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

NOTES - UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

6 MARK ITEM WITH .12 HIGH BLACK CHARACTERS IN

ACCORDANCE WITH MIL-STD-13231, GROUP II AND TABLE 1.

MARK “W” NUMBER PER TABLE 1. LOCATE APPROXIMATELY

WHERE SHOWN

7 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION ON

MARKER SHOWN. LOCATE AT APPROXIMATE CENTER OF

CABLE

8 LABEL SHALL BE LOCATED WITH NOT MORE THAN 3”

BETWEEN LABEL AND CONNECTOR

9 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE,

TIE-BACK, AND INSULATE

PART NUMBER: 829E347-1

-1

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION

MATERIAL/

SPECIFICATION

QTY

1 EA 1 96906 M28840/16AB1S1

PLUG, ELECTRICAL CONNECTOR,

12-CONTACT, CRIMP-CONTACT, SHELL

SIZE=13

1 EA 2 81349 M28840/1BW

STRAIN RELIEF, ELECTRICAL

CONNECTOR

AR 3 0VSP9 1592A

CABLE, ELECTRIC, 24 AWG, U/UTP

1 EA 4 0DSK3 SS-37000-007

PLUG, RJ45, 8P8C

1 EA 5 0DSK3 450-034-ND

BOOT, FOR MODULAR RJ45

AR 6 81349 M23053/15-107-0

INSULATION, HEAT SHRINK, 0.300" DIA

SAE AMS-DTL-23053/15

AR 7 89093 PS-500-2-WT

34 2 1

2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E347 -

SCALE:

DISTRIBUTION STATEMENT D: DoD AND U.S. DoD CONTRACTORS ONLY.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

MARKER C MARKER A

MARKER B

MARKER A MARKER B MARKER C LENGTH

W347

28687-829E347-1

W347

P1 (NAVSIM)

W347

P347 (GPNTS)

480.0 +3.0/-0.0

TABLE 1

W347

NOTES – UNLESS OTHERWISE SPECIFIED:

1. A SQUARE SYMBOL MEANS: SEE NOTE NUMBER INDICATED

2. WORKMANSHIP SHOULD BE IN ACCORDANCE WITH

IPC/WHMA-A-620, CLASS 3, AND MIL-HDBK-454, GUIDELINE 9

3. PERFORM DIELECTRIC STRENGTH TEST IN ACCORDANCE

WITH MIL-STD-202, METHOD 301 AT TEST CABLE AT 500VDC

BETWEEN ADJACENT CONDUCTORS. LEAKAGE SHALL NOT

EXCEED 20 MICRO AMPERES

4. CHECK FOR CONTINUITY PER WIRE LIST OR EQUIVALENT

5 MARK IN ACCORDANCE WITH

SAE-AS5942 WITH .06” MINIMUM HIGH CHARACTERS

6 MARK IDENTIFICATION IN ACCORDANCE WITH MIL-STD-130

AND TABLE 1. MARK WITH CURRENT DRAWING REVISION

ON MARKER SHOWN. LOCATE AT APPROXIMATE CENTER

OF CABLE

7 LABEL SHALL BE LOCATED WITH NOT MORE

THAN 3” BETWEEN LABEL AND CONNECTOR

8 INSTALL HEAT SHRINK TUBING IN ACCORDANCE WITH

SAE-AMS-DTL-23053

9 OVERLAP SLEEVING EDGES THEN APPLY FN 5,

HEAT SHRINK TUBING, AS REQUIRED

10 NC AS NOTED, WIRE IS NOT CONNECTED. ISOLATE, TIE

BACK, AND INSULATE

11 UNUSED CONTACT POSITIONS SHALL BE FILLED WITH

CONTACTS SUPPLIED

12 CUT BACK DRAIN WIRES AT P1, P2, AND P370 AND

INSULATE

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIM ARE IN INCHES

TOL ON ANGLE ± .5°

2 PL ± .03 3 PL ± .010

INTERPRET DIM AND TOL PER

ASME Y14.5M - 1994

TITLE

CABLE ASSEMBLY, NTDS A/B

829E370

SCALE: NONE SHEET 1 OF 3

DWG NOCAGE CODE

28687

SIZE

REV

2 1

4 2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

WARNING: - THIS DOCUMENT CONTAINS DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) AS

AMENDED, OR THE EXPORT ADMINISTRATION ACT (TITLE 50, U.S.C. , APP 2401 ET

SEQ.) AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL AND CIVIL PENALTIES. DISSEMINATE IN ACCORDANCE WITH

PROVISIONS OF DOD DIRECTIVE 5230.25.

THIS DRAWING SHALL BE INTERPRETED IN ACCORDANCE WITH ASME Y14.100

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY IN SUPPORT

OF US DOD EFFORTS. OTHER REQUESTS SHALL BE REFERRED TO PMW/A 170.

ALL SHEETS ARE THE SAME

REVISION STATUS

PART NUMBER: 829E370-1

AR 8 61620 PS-750-2-WT

LABEL, MARKING

4 7 0X4C9 EXPANDO FR-1/2

SLEEVING, BRAID, EXPANDABLE,

.500" DIA

AR 6 92194 5480/50C

CABLE, ELECTRIC, 50 TWISTED PAIRS,

24 AWG, OVERALL SHIELD

AR EA 5 0HJL2 M23053/15-203-0

HEAT SHRINK TUBING, 1.100" DIA,

POLYOLEFIN

SAE

AMS-DTL-23053/15

3 EA 4 81349 M28840/1GW

CLAMP, CABLE, ELECTRICAL

CONNECTOR

1 EA 3 81349 M28840/16AG1S3

PLUG, 92 SOCKET, SHELL SIZE=25

MIL-DTL-28840/16

1 EA 2 81349 M28840/16AG1S2

PLUG, 92 SOCKET, SHELL SIZE=25,

ALT KEY POS

MIL-DTL-28840/16

1 EA 1 81349 M28840/16AG1S1

PLUG, 92 SOCKET, SHELL SIZE=25,

ALT KEY POS

MIL-DTL-28840/16

QTY

UOM

FIND

CAGE

CODE

PART NUMBER DESCRIPTION SPECIFICATION

-1

PARTS LIST

CHK

DWN R. TRANCHANT 2016-09-13

ENGR B. MADER 2016-09-13

ENGR C. PINKLEMAN 2016-09-13

34 2 1

4 2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 28687

DRAWING NO

SHEET 2

REV

NONE

829E370 -

SCALE:

MARKER A MARKER B MARKER C MARKER D LENGTH E LENGTH F

W370

28687-829E370-1

W370

P1 (NAVSIM)

W370

P2 (NAVSIM)

W370

P370 (GPNTS)

12.0 +1.0

/-0.0

468.0 +3.0/-0.0

TABLE 1

MARKER D

MARKER A

LENGTH E

MARKER B

MARKER C

P370

LENGTH F

AutoCAD SHX Text

34 2 1

4 2 1

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

SIZE CAGE CODE

C 55910

DRAWING NO

SHEET 3

REV

NONE

829E370 -

SCALE:

0 329

P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P PP P

5 8

AutoCAD SHX Text

OUTPUT DATA BIT 04 RET

AutoCAD SHX Text

OUTPUT DATA BIT 14

AutoCAD SHX Text

OUTPUT DATA BIT 15

AutoCAD SHX Text

OUTPUT DATA BIT 13

AutoCAD SHX Text

OUTPUT DATA BIT 15 RET

AutoCAD SHX Text

OUTPUT DATA BIT 14 RET

AutoCAD SHX Text

OUTPUT DATA BIT 13 RET

AutoCAD SHX Text

OUTPUT DATA BIT 10

AutoCAD SHX Text

OUTPUT DATA BIT 12

AutoCAD SHX Text

OUTPUT DATA BIT 11

AutoCAD SHX Text

OUTPUT DATA BIT 12 RET

AutoCAD SHX Text

OUTPUT DATA BIT 11 RET

AutoCAD SHX Text

OUTPUT DATA BIT 10 RET

AutoCAD SHX Text

OUTPUT DATA BIT 09 RET

AutoCAD SHX Text

OUTPUT DATA BIT 09

AutoCAD SHX Text

OUTPUT DATA BIT 05

AutoCAD SHX Text

OUTPUT DATA BIT 06

AutoCAD SHX Text

OUTPUT DATA BIT 07

AutoCAD SHX Text

OUTPUT DATA BIT 08

AutoCAD SHX Text

OUTPUT DATA BIT 08 RET

AutoCAD SHX Text

OUTPUT DATA BIT 07 RET

AutoCAD SHX Text

OUTPUT DATA BIT 05 RET

AutoCAD SHX Text

OUTPUT DATA BIT 06 RET

AutoCAD SHX Text

OUTPUT DATA BIT 00 RET

AutoCAD SHX Text

OUTPUT DATA BIT 01

AutoCAD SHX Text

OUTPUT DATA BIT 02

AutoCAD SHX Text

OUTPUT DATA BIT 03

AutoCAD SHX Text

OUTPUT DATA BIT 04

AutoCAD SHX Text

OUTPUT DATA BIT 03 RET

AutoCAD SHX Text

OUTPUT DATA BIT 02 RET

AutoCAD SHX Text

OUTPUT DATA BIT 01 RET

AutoCAD SHX Text

OUTPUT DATA BIT 00

AutoCAD SHX Text

INPUT DATA BIT 09 RET

AutoCAD SHX Text

BLUE/ORANGE

AutoCAD SHX Text

INPUT DATA BIT 15 RET

AutoCAD SHX Text

INPUT DATA BIT 14 RET

AutoCAD SHX Text

INPUT DATA BIT 13 RET

AutoCAD SHX Text

INPUT DATA BIT 12 RET

AutoCAD SHX Text

INPUT DATA BIT 11 RET

AutoCAD SHX Text

INPUT DATA BIT 10 RET

AutoCAD SHX Text

ODA RETURN

AutoCAD SHX Text

EFR RETURN

AutoCAD SHX Text

EFR

AutoCAD SHX Text

INPUT DATA BIT 14

AutoCAD SHX Text

EFA RETURN

AutoCAD SHX Text

ODR RETURN

AutoCAD SHX Text

ODA

AutoCAD SHX Text

EFA

AutoCAD SHX Text

INPUT DATA BIT 15

AutoCAD SHX Text

ODR

AutoCAD SHX Text

INPUT DATA BIT 13

AutoCAD SHX Text

INPUT DATA BIT 12

AutoCAD SHX Text

INPUT DATA BIT 11

AutoCAD SHX Text

INPUT DATA BIT 10

AutoCAD SHX Text

GREEN/SLATE

AutoCAD SHX Text

RED

AutoCAD SHX Text

RED

AutoCAD SHX Text

SLATE/WHITE

AutoCAD SHX Text

BROWN/WHITE

AutoCAD SHX Text

RED

AutoCAD SHX Text

BROWN/SLATE

AutoCAD SHX Text

RED

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE/GREEN

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE/WHITE

AutoCAD SHX Text

RED

AutoCAD SHX Text

BLUE/SLATE

AutoCAD SHX Text

RED

AutoCAD SHX Text

BLUE/BROWN

AutoCAD SHX Text

BLUE/GREEN

AutoCAD SHX Text

RED

AutoCAD SHX Text

GREEN

AutoCAD SHX Text

RED

AutoCAD SHX Text

INPUT DATA BIT 08 RET

AutoCAD SHX Text

INPUT DATA BIT 07 RET

AutoCAD SHX Text

INPUT DATA BIT 06 RET

AutoCAD SHX Text

INPUT DATA BIT 05 RET

AutoCAD SHX Text

INPUT DATA BIT 04 RET

AutoCAD SHX Text

INPUT DATA BIT 03 RET

AutoCAD SHX Text

INPUT DATA BIT 02 RET

AutoCAD SHX Text

INPUT DATA BIT 01 RET

AutoCAD SHX Text

INPUT DATA BIT 00 RET

AutoCAD SHX Text

INPUT DATA BIT 07

AutoCAD SHX Text

INPUT DATA BIT 09

AutoCAD SHX Text

INPUT DATA BIT 08

AutoCAD SHX Text

INPUT DATA BIT 06

AutoCAD SHX Text

INPUT DATA BIT 05

AutoCAD SHX Text

INPUT DATA BIT 04

AutoCAD SHX Text

INPUT DATA BIT 03

AutoCAD SHX Text

INPUT DATA BIT 02

AutoCAD SHX Text

INPUT DATA BIT 01

AutoCAD SHX Text

INPUT DATA BIT 00

AutoCAD SHX Text

BLUE/GREEN

AutoCAD SHX Text

ORANGE/WHITE

AutoCAD SHX Text

ORANGE/BROWN

AutoCAD SHX Text

RED

AutoCAD SHX Text

BLUE/WHITE

AutoCAD SHX Text

RED

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE/GREEN

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLUE/SLATE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BROWN

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

GREEN

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLUE/BROWN

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLACK

AutoCAD SHX Text

BLUE

AutoCAD SHX Text

GREEN

AutoCAD SHX Text

ORANGE

AutoCAD SHX Text

BLACK

AutoCAD SHX Text

BROWN

AutoCAD SHX Text

BLACK

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLACK

AutoCAD SHX Text

ORANGE

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE

AutoCAD SHX Text

ORANGE/SLATE

AutoCAD SHX Text

SLATE

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE/BROWN

AutoCAD SHX Text

RED

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLUE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

SLATE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLUE/WHITE

AutoCAD SHX Text

BLUE/ORANGE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BROWN/SLATE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BLUE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

BROWN/WHITE

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

SLATE/WHITE

AutoCAD SHX Text

BROWN

AutoCAD SHX Text

RED

AutoCAD SHX Text

ORANGE/SLATE

AutoCAD SHX Text

RED

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

GREEN/WHITE

AutoCAD SHX Text

IDR

AutoCAD SHX Text

IDR RETURN

AutoCAD SHX Text

IDA RETURN

AutoCAD SHX Text

EIE RETURN

AutoCAD SHX Text

EIR RETURN

AutoCAD SHX Text

EIE

AutoCAD SHX Text

EIR

AutoCAD SHX Text

IDA

AutoCAD SHX Text

Technical Drawing Pk - 12.pdf

Sheets and Views

P370_1-Sheet1

P370_1-Sheet2

P370_1-Sheet3

Technical Drawing Pk - 13.pdf

620e101 Sheet1 (1)

620e101 Sheet2 (1)

File details come from the government source that posted it.