C1.5 ATTACHMENT 2 -TOWER MOD DRAWINGS PKG.pdf

55910 D SIZE - ASME Y14.100, REV 6-200

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235232

SHEET 1 OF 1

56410

COGNIZANT CODE

0235122

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

TOWER MODIFICATIONS

DRAWING TREE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

K.HANSEN APR2018

TPICKERING 8MAY2018

TPICKERING 8MAY2018

0235232 -

235230-_-TOWER MODIFICATIONS

23544-_-LIFT EYE235223-_-CAMERA TREE MOUNT 235234-_-TOWER LADDER ASSEMBLY

235245-_-LIFT EYE

MAIN

235456-_-LIFT EYE

SUPPORT

235235-_-LADDER

ASSEMBLY

235238-_-LADDER

BRACKET ADAPTER

235224-_-UPPER PLATE

235225-_-MAIN TUBE

235226-_-STIFFENER

RING

235227-_-KEY

235228-_-W14 X 99

I-BEAM

235239-_-LADDER

COLUMN BRACKET

235240-_-LADDER

COLUMN BRACKET MAIN

PLATE

235241-_-LADDER

COLUMN BRACKET

PLATE 1

235242-_-LADDER

COLUMN BRACKET

PLATE 2

235243-_-LADDER

COLUMN BRACKET

PLATE 3

243601-_-TOWER CROSSOVER PIPE 235229-_-LEGACY TOWER

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 1 OF 7

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

TOWER MODIFICATIONS

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N.NGUYEN 17APR2018

KHANSEN 20APR2018

TPICKERING 9MAY2018

0235230 -

NOTES:

1. WEIGHT: ~46000 LBS. AS PROVIDED, ~50,000 LBS. AS DELIVERED AFTER MODIFICATIONS

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER

AWS D1.1 CLAUSE .

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS, WITH NO LEAKS

FOR WATER TO PENETRATE BETWEEN SURFACES, WHERE APPLICABLE.

4. DYE PENETRANT TEST (PT) REQUIRED AT SPECIFIED LOCATIONS. TESTING

PERFORMED BY AWS CERTIFIED WELD INSPECTOR.

5. PROVIDE CERTIFICATION ON DELIVERY FOR ABOVE TESTING

6. REMOVE PARTS AS SHOWN

7. REMOVE EXTRANEOUS ITEMS FROM TOWER AS DETERMINED AND MARKED BY CUSTOMER

8. CUT AND GRIND AS NECESSARY TO WELD PLUMB WITH COLUMN

9. SEE PAGE 6 FOR MODIFICATIONS TO RAIL SUPPORT SECTIONS ON THE TOWER

10. FINISH REQUIREMENTS:

APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER AND ONE

TOP COAT EPOXY POLYAMIDE; COLOR: BLACK TO MATCH EXISTING COLOR.

0235122

1 55910 243601 - TOWER CROSSOVER PIPE ASTM 50 KSI STEEL 5

1 55910 235229 - LEGACY TOWER ASTM 50 KSI STEEL 4

1 55910 235223 - CAMERA TREE MOUNT ASTM 50 KSI STEEL 3

4 55910 235244 - LIFT EYE ASSEMBLY ASTM 50 KSI STEEL 2

6 55910 235234 - TOWER LADDER ASSEMBLY VARIOUS 1

QTY REQ'D CAGE CODE PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND NO.

AS PROVIDED

235229 DRAWING NOT INCLUDED

AS DELIVERED

A

DETAIL A

55910 D SIZE - ASME Y14.100, REV 6-2004

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

222.0

266.3

236.0

370.0

78.0

92.0

B

DETAIL B

40.2

40.9

12.16

3.00

92.0

222.0

C

DETAIL C

10.00

41.27

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 3

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

STEP 1

STEP 2: WELD ON CAMERA TREE MOUNT

*SEE PG 4 FOR POSITION DETAILS

6 x6

STEP 3: WELD LADDER STAND-OFFS AND INSTALL LADDERS

*SEE PG4 FOR POSITION DETAILS

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 4

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

STEP 6: WELD ON NEW LIFT EYES

AND CROSSOVER PIPE

STEP 5: CUT OLD LIFT EYES

6 X 4

STEP 6: NEW LIFT EYE AND CROSSOVER PIPE

POSITIONING

DETAIL D

D

4 PLACES

0.75

22°

2 PLACES

0.375

41.27

54.02

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 5

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

STEP 2: CAMERA TREE MOUNT POSITIONING STEP 3: LADDER STANDOFF POSITIONING

STEP 3: LADDER STANDOFF POSITIONING

MORE DETAIL

E

DETAIL E

A A

SECTION A-A

F

DETAIL F

45.75

0.375

0.375

36 PLACES

0.375

G

DETAIL G

H

DETAIL H

21.00

7.00

10.00

44.00

78.0

9.40

259.50

I

DETAIL I

3.375

22.00

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 6

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

J

DETAIL J

K

DETAIL K

CURRENT RAIL SUPPORT

0.340

MODIFIED RAIL SUPPORT

SUPPORT I BEAM

SPACER PLATE

SUPPORT STRUCTURE

3/8

G

3/8 CHAMFER

MATERIAL

REMOVED

13 14

11. REMOVE WELD ALONG OUTER EDGE OF I BEAM AND SUPPORT PLATE

12. REMOVE MATERIAL ON SUPPORT PLATE AND SUPPORTING STRUCTURE

UNTIL EVEN WITH I BEAM OUTER EDGE (0.34 INCHES REMOVED)

13. ADD 3/8 CHAMFER TO SPACER PLATE ALONG OUTER EDGE BELOW THE I BEAM

14. BEVEL WELD (3/8) AT THE CHAMFER AS SHOWN; GRIND WELD BEAD EVEN WITH

OUTER EDGE OF I BEAM AND SUPPORT PLATE

15. REPEAT THESE STEPS AT EACH OF THE FOUR RAIL SUPPORTS

16. FINISH: BRUSH/ROLL ON PAINT TO COVER BARE METAL

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235230

SHEET 7

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235230

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -03OCT2017--

REV

40.1

MINIMUM

L

DETAIL L

MODIFIED RAIL SUPPORTS

WELD BEAD GROUND FLAT

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243601

SHEET 1 OF 1

56410

COGNIZANT CODE

0235230

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

TOWER CROSSOVER PIPE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.

SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

K.HANSEN

0243601 -

19APR2018

T.PICKERING

T.PICKERING

7MAY2018

8MAY2018

NOTES:

1. ASTM A53 GRADE C STEEL PIPE 12.75 OD X 0.375 WALL THK

2. WEIGHT 800 LBS

3. NO FINISH

4. COPE AS REQUIRED TO FIT ON TOWER, DRAWING # 0235230

195 ±.15

REFERENCE ONLY

169 ±.15

199 ±.15

R 2.02X

68°

22°

O 12.75

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235244

SHEET 1 OF 1

56410

COGNIZANT CODE

0235230

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

LIFT EYE ASSEMBLY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N. NGUYEN AUG2017

KHANSEN 20APR2018

TPICKERING 8MAY2018

-0235244

NOTES:

1. WEIGHT: 274 LBS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER

AWS D1.1 CLAUSE .

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS.WELDS WITH NO LEAKS

FOR WATER TO PENETRATE BETWEEN SURFACES, WHERE APPLICABLE.

4. DYE PENETRANT TEST (PT) REQUIRED AT SPECIFIED LOCATIONS. TESTING

PERFORMED BY AWS CERTIFIED WELD INSPECTOR.

5. PROVIDE CERTIFICATION ON DELIVERY FOR ABOVE TESTING.

6. NO FINISH

2 55910 243570 - LIFT EYE SUPPORT ASTM 50 KSI STEEL 2

1 55910 243569 - LIFT EYE MAIN ASTM 50 KSI STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

9.00

4.50

2 PLACES 0.5

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235245

SHEET 1 OF 1

56410

COGNIZANT CODE

0243244

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

LIFT EYE MAIN

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N. NGUYEN APR2018

KHANSEN 20APR2018

TPICKERING 8MAY2018

-0235245

NOTES:

1. WEIGHT: 239 LBS.

2. MATERIAL: ASTM 50 KSI STEEL

3. NO FINISH

R 5.00

O3.25 THRU

10.00

24° X 2

R 7.00 4.00

20.00

4.00 4.00

10.00

10.00

2.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235246

SHEET 1 OF 1

56410

COGNIZANT CODE

0235244

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

LIFT EYE SUPPORT

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N. NGUYEN 04APR2018

KHANSEN 20APR2018

TPICKERING 8MAY2018

-0235246

NOTES:

1. WEIGHT: 17.5 LBS.

2. MATERIAL: ASTM 50 KSI STEEL

3. NO FINISH

R 7.00 2.00

5.00

7.00

2.00

31°

4.50

3.50

2.00

1.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235223

SHEET 1 OF 2

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -04/23/2018--

REV

N. NGUYEN 20APR2018

24APR2018

9MAY2018

-0235223

0235230

KHANSEN

TPICKERING

0235122

1 55910 235228 - W14 X 99 I-BEAM ASTM 50 KSI 5

1 55910 235227 - KEY ASTM 50 KSI 4

1 55910 235226 - STIFFENER RING ASTM 50 KSI 3

1 55910 235225 - MAIN TUBE ASTM 50 KSI 2

1 55910 235224 - UPPER PLATE ASTM 50 KSI 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FOR REFERENCE ONLY

NOTES:

1. FINISH REQUIRMENTS:

PRIMER AND ONE TOP COAT EPOXY POYAMIDE; COLOR: BLACK.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER

AWS D1.1 CLAUSE.

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS. WELDS WITH NO LEAKS

FOR WATER TO PENETRATE BETWEEN SURFACES.

4. WEIGHT: 625.0 LBS.

5. FILL GAP BETWEEN PIPE AND I-BEAM FLANGE WITH WELD

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1235223

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 235223

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -05/31/2017--

REV

44.125

1.00

39.60

A

A SECTION A-A

B

DETAIL B

0.22( )

1/4

1/4

1/4

1/4

1/4 1/4 1/4

C

DETAIL C

1/4

1/4 1/4

1/4

1/4

1.73

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235224

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT

UPPER PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -04/01/2018--

REV

N. NGUYEN 06/01/2017

KHANSEN 20APR2018

TPICKERING 9MAY2018

-0235224

0235223 0235122

NOTES:

1. NO FINISH

2. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1 IN THICK NOMINAL

3. WEIGHT: 111.3 LBS.

4. ADJUST DIAMETER FOR CLOSE-FIT OF:

CAMERA TREE MOUNT MAIN TUBE, DRAWING NO. 0235225

30.00

1.00

16.00

30.00

R 7.00 3.00

O 8.00 +0.10 -0.00

22.00

8.00

8.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235225

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT

MAIN TUBE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -04/01/2018--

REV

N. NGUYEN 06/01/2017

KHANSEN 20APR2018

TPICKERING 9MAY2018

-0235225

0235223 0235122

A A

SECTION A-A

O 8.00

O 7.00

O 1.625 THRU

1.73

25.25

85.50

NOTES:

1. NO FINISH

2. MATERIAL: STRUCTURAL STEEL TUBE, 8" OD X 0.5" THICK NOMINAL, ASTM 50 KSI

3. WEIGHT: 284.4 LBS.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235226

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT

STIFFENER RING

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -04/01/2018--

REV

N. NGUYEN 06/01/2017

KHANSEN 20APR2018

TPICKERING 9MAY2018

-0235226

0235223 0235122

6.12

O 8.50

O 8.00 +0.10 -0.00

NOTES:

1. NO FINISH

2. MATERIAL: STRUCTUREAL STEEL PIPE, 50 KSI

3. WEIGHT: 11.2 LBS.

4. ADJUST DIAMETER FOR CLOSE-FIT OF:

CAMERA TREE MOUNT MAIN TUBE, DRAWING NO. 0235225

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235227

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT KEY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

REV

N. NGUYEN 3/31/2018

KHANSEN 20APR2018

TPICKERING 9MAY2018

-0235227

0235223 0235122

INITIAL RELEASE 20APR2018

FOR REFERENCE ONLY

A

DETAIL A

R 4.00

R 4.25

1.00

1.625

6.125

7.75( )

3.10

2.85 1.00

7.07

NOTES:

1. NO FINISH

2. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1 IN THICK

3. WEIGHT: 6.3 LBS.

0.50

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235228

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

D

THIRD ANGLE PROJECTION

CAMERA TREE MOUNT

W14 X 99 I-BEAM

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -20APR2018--

REV

N. NGUYEN 04/01/2018

20APR2018

TPICKERING 9MAY2018

-0235228

0235223 0235122

KHANSEN

FOR REFERENCE ONLY

O 8.00 +0.10 -0.00 ` 1.00

14.565

30.00

14.16

3.00

22.00

1.00

NOTES:

1. NO FINISH

2. MATERIAL: W14X99 I-BEAM, ASTM A992 OR SIMILAR

3. WEIGHT: 211.7 LBS.

4. ADJUST DIAMETER FOR CLOSE-FIT OF:

CAMERA TREE MOUNT MAIN TUBE, DRAWING NO. 0235225

R 7.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235234

SHEET 1 OF 1

56410

COGNIZANT CODE

0235230

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

D

THIRD ANGLE PROJECTION

TOWER LADDER ASSEMBLY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N. NGUYEN DEC2017

KHANSEN 20APR2018

TPICKERING 9MAY2018

-0235234

0235122

NOTES:

1. WEIGHT: 211 LBS.

2. NO FINISH

4 55910 235235 - LADDER ASSEMBLY ALUMINUM 6

2 55910 235239 - LADDER MOUNTING BRACKET ASTM A36 STEEL 5

4 55910 235238 - LADDER BRACKET ADAPTER ALUMINUM 4

16 3A054 94819A061 - 3/4-10 HEX NUT 316 SS 3

16 3A054 90128A901 - 3/4-10 1-1/2 SCKT HEAD CAP SCREW` ZINC-ALLOY STEEL 2

32 3A054 90107A121 - 3/4 FLAT WASHER 316 SS 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.FOR REFERENCE ONLY

3.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235235

SHEET 1 OF 2

56410

COGNIZANT CODE

0235234

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

D

THIRD ANGLE PROJECTION

LADDER ASSEMBLY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N.NGUYEN APR2018

KHANSEN APR2018

TPICKERING 9MAY2018

-0235235

0235122

NOTES:

1. WEIGHT: APPROX. 100 LBS.

2. NO FINISH

3. SUPPLIED FROM VENDOR TO SPAWAR:

BAUER CORPORATION

PO BOX 6219 KINSTON NC

PART NO. 23714

FOR REFERENCE ONLY

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1235235

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 235235

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -APR2018--

REV

A

DETAIL A

6.00

10.15

0.25

1.55

R 0.10

R 0.10

O 0.754 X THRU

1.002 X

4.002 X

1.002 X 2.002 X

0.25

1.80

1.00

4.00 6.00

1.002 X O 0.752 X THRU

O 0.754 X THRU

4.002 X

22.00

4.00

116.00

4.00

168.00

5.25

1.5014 X

10.5013 X

5.25

1 X LADDER

4 X LADDER STANDOFF PLATE

4 X LADDER BACKING PLATE

B

DETAIL B

0.25

2.50

0.25

2.20

8.20

1.50

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235239

SHEET 1 OF 1

56420

COGNIZANT CODE

0235234

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

D

THIRD ANGLE PROJECTION

LADDER MOUNTING

BRACKET

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

N. NGUYEN AUG2017

TPICKERING 8MAY2018

TPICKERING 9MAY2018

-0235239

0235122

1 55910 235243 - LADDER MOUNTING PLATE 3 ASTM A36 STEEL 4

1 55910 235242 - LADDER MOUNTING PLATE 2 ASTM A36 STEEL 3

1 55910 235241 - LADDER MOUNTING PLATE 1 ASTM A36 STEEL 2

1 55910 235240 - LADDER BRACKET MAIN PLATE ASTM A36 STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

NOTES:

1. WEIGHT: 34 LBS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER

AWS D1.1 CLAUSE.

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS. WELDS WITH NO LEAKS

FOR WATER TO PENETRATE BETWEEN SURFACES.

4. MASK TIP WELD AREA BEFORE APPLYING FINISH, 0.5 IN

5. FINISH REQUIREMENTS:

APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER AND ONE

TOP COAT EPOXY POLYAMIDE; COLOR: BLACK

3 PLACES0.25

10.35 6.504.50

2.69

2.79

22.85

6.00

FOR REFERENCE ONLY

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235238

SHEET 1 OF 1

56420

COGNIZANT CODE

0235234

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

D

THIRD ANGLE PROJECTION

LADDER BRACKET ADAPTER

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

N. NGUYEN APR2018

NOT YET APR2018

TPICKERING 9MAY2018

-0235238

0235122

NOTES:

1. WEIGHT: 2 LBS.

2. MATERIAL: 6061 ALUMINUM, 5 X 5 X 0.5 ANGLE

3. NO FINISH

0.50

6.00

5.00

5.00

1.00 1.00

1.00 1.00

2.502 X

3.002 X

FOR REFERENCE ONLY

O 0.7812 X THRU

O 0.7812 X THRU

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235240

SHEET 1 OF 1

56410

COGNIZANT CODE

0235239

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

D

THIRD ANGLE PROJECTION

LADDER BRACKET MAIN

PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

N. NGUYEN AUG2017

TPICKERING 8MAY2018

TPICKERING 9MAY2018

-0235240

0235122

NOTES:

1. WEIGHT: 19 LBS.

2. MATERIAL: ASTM A36 STEEL, 0.5 IN THICK NOMINAL

3. NO FINISH

4. USED IN ASSEMBLY 235239-LADDER COLUMN BRACKET

O 0.784 X1.002 X

4.002 X6.00

2.502 X 17.852 X

22.85

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235241

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

LADDER COLUMN BRACKET

PLATE 1

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

N. NGUYEN AUG2017

TPICKERING 8MAY2018

TPICKERING 9MAY2018

-0235241

0235239 0235122

NOTES:

1. WEIGHT: 7.69 LBS.

2. MATERIAL: ASTM A36 STEEL, 0.5 IN THICK NOMINAL

3. NO FINISH

R .50

R .50

2.72

6.06

6.00

122°

5.65

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235242

SHEET 1 OF 1

56420

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

LADDER COLUMN BRACKET

PLATE 2

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

N. NGUYEN AUG2017

TPICKERING 8MAY2018

TPICKERING 9MAY2018

-0235242

0235239 0235122

NOTES:

1. WEIGHT: 2.6 LBS.

2. MATERIAL: ASTM A36 STEEL, 0.5 IN THICK NOMINAL

3. NO FINISH

6.00

3.00

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235243

SHEET 1 OF 1

56420

COGNIZANT CODE

0235239

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

LADDER COLUMN BRACKET

PLATE 3

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

N. NGUYEN AUG2017

TPICKERING 8MAY2018

TPICKERING 9MAY2018

-0235243

0235122

NOTES:

1. WEIGHT: 4 LBS.

2. MATERIAL: ASTM A36 STEEL 0.5 IN THICK NOMINAL

3. NO FINISH

6.00

2.79

2.69

5.05

2.40

135°