A1.5 DRAWING 1_243551.pdf

FILE DATE: 2018/05/02 FILE NAME: 243551_-_18 IN RAIL MFG ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243551

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243554

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL MFG ASSY

0243551

2018/02/13

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 22,400 LBS

1. ASSEMBLE THE 18 IN RAIL MFG ASSEMBLY AS SHOWN USING SPECIFIED FASTENERS. MCMASTER PART #'S PROVIDED.

2. FINISH: NONE

32 3A054 243571 - 1+8TH-7UNC X5 SS HEX BOLT ASSY STAINLESS STEEL 4

1 55910 0243536 - 18 IN SNUB END MFG ASSY STEEL, STRUCTURAL 50KSI OR BETTER 3

2 55910 0243543 - 18 IN RAIL WELDMENT STEEL, STRUCTURAL A992 2

1 55910 0243550 - KP-HB END TOP ASSY STEEL, STRUCTURAL 50KSI OR BETTER 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/05/02 FILE NAME: 243543_-_18 IN RAIL WELDMENT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243543

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243551

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL WLDMNT

0243543

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 7,400 LBS

1. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

3. WELD THE BULKHEADS, CLEVIS PLATES, CLEVIS ASSEMBLIES AND GUSSETS TO THE W18 X106 I BEAM.

4. FINISH: SAND BLAST STRUCTURE AND APPLY ONE COATS OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY). MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

2 55910 0243548 - 18 IN RAIL MOD GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 5

2 55910 0235024 - DOUBLE CLEVIS WELDMENT STEEL SEE 235024 DRAWING FOR DETAILS 4

4 55910 0243544 - 18 IN RAIL CLEVIS PLTE STEEL, STRUCTURAL 50KSI OR BETTER 3

2 55910 0243541 - 18 IN RAIL BULKHD STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0243542 - W18 X 106 I BEAM 65FT STEEL, STRUCTURAL A992 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/05/02 FILE NAME: 243543_-_18 IN RAIL WELDMENT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243543

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243543

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE FEB 2018

A

A SECTION A-A115.884X u .125

3/8

4 CLEVIS PLATES

3.10 +.00 -.124X

3/8

2 CLEVIS ASSEMBLIES

65-2.25

1/2

2 BLKHDS

3.002X.9122X u .06

B

DETAIL B

1.002X u .03

6.152X u .125

I BEAM AND BLKHD

ARE FLUSH

3.52

3/8

2 GUSSETS

3/8

2 GUSSETS

FILE DATE: 2018/05/01 FILE NAME: 243542_-_W18 X 106 I BEAM 65FT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243542

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

W18 X 106 I BEAM

X 65 FT LONG

0243542

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 7,000 LBS

1. W18X106 STEEL WIDE FLANGE IBEAM, ASTM A992 65 FT LONG CONTINUOUS SECTION.

2. THE PREVIOUSLY USED SECTIONS OF RAIL I BEAM WITH THE HOLE PATERN IN THEM ARE AVAILABLE TO VENDER FOR USE AS A TEMPLATE.

3. FINISH: NONE

18.73 NOM

11.2 NOM

.940

282.02X u .05

(23 FT 6 IN)

7.010X u .03

24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03 24.02X u .03

2.110X u .03 O 1.43820X

780.0 NOM

(65 FT)

FILE DATE: 2018/03/06 FILE NAME: 243550_-_KP-HB END TOP ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243550

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243551

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KP-HB END TOP ASSY

0243550

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 2800 LBS

1. BOLT KING POST ASSEMBLY TO KP-HB EXT WLDMNT AS SHOWN USING SPECIFIED FASTENERS. MCMASTER PART #'S PROVIDED.

2. FINISH: NONE

12 55910 0243535 - KING POST HEX BOLT ASSY STAINLESS STEEL BOLT ASSEMBLY 3

1 55910 0243533 - KING POST UPPER ASSY STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0243545 - KP-HB EXT WLDMNT STEEL, STRUCTURAL 50KSI OR BETTER 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/03/06 FILE NAME: 243545_-_KP-HB EXT WLDMNT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243545

SHEET 1 OF 4

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243550

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KP-HB EXT WLDMNT

0243545

29JAN2018

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING JAN 2018

NOTES: WEIGHT OF ASSEMBLY 2400 LBS

1. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

3. WELD THE 18 IN RAIL KP-HB BLKHD AND GUSSETS TO THE GOVERNMENT PROVIDED KP-HB CUT SECTION. (PAGE 3)

4. WELD THE KING POST FLANGE AND KING POST GUSSETS TO THE KP-HB CUT SECTION. (PAGE 4)

5. FINISH: SAND BLAST STRUCTURE AND APPLY ONE COATS OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY). MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

2 55910 0243549 - KP-HB END GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 6

2 55910 0243548 - 18 IN RAIL MOD GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 5

4 55910 0243532 - KING POST GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 4

1 55910 0243531 - KING POST FLANGE STEEL, STRUCTURAL 50KSI OR BETTER 3

1 55910 0243540 - KP-HB BLKHD STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0243546 - KP-HB CUT SECTION STEEL, STRUCTURAL 50KSI OR BETTER 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/03/06 FILE NAME: 243545_-_KP-HB EXT WLDMNT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243545

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243545

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE 29JAN2018

REFERENCE VIEWS

FILE DATE: 2018/03/06 FILE NAME: 243545_-_KP-HB EXT WLDMNT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243545

SHEET 3

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243545

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE 29JAN2018

A

A SECTION A-A

1.01 ±.05

3.520 ±.05 6.552X u .05

6.552X u .05

1/2

ALL

5/16

5/16

FILE DATE: 2018/03/06 FILE NAME: 243545_-_KP-HB EXT WLDMNT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243545

SHEET 4

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243545

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE 29JAN2018

B B

SECTION B-B

C

DETAIL C

1.75

6.50 ±.054X

1.75 5/16

ALL

5/16

4 GUSSETS

FILE DATE: 2018/03/06 FILE NAME: 243546_-_KP-HB CUT SECTION.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243546

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KP-HB CUT SECTION

0243546

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 2000 LBS

1. THIS ITEM WILL BE PROVIDED BY SSC PAC AND TRANSPORTED BY THE VENDER FROM SSC-PAC BAYSIDE CAMPUS SAN DIEGO CA 92106

TO THIER SHOP.

2. THE ITEM HAS BEEN ROUGH CUT AWAY FROM A LARGER ASSEMBLY THE DIMESIONS SHOWN ARE FOR THE CLEAN UP WORK THAT WILL DONE ON THOSE FEATURES. THE CUT AREAS ARE REQUIRED TO BE SQUARE, PLANAR SURFACES +/- .O5 INCH.

THE FINISHED EDGE OF THE CUT W12X79 I BEAM SECTIONS ARE CO-PLANAR TO EACH OTHER +/- .05 INCH. (SEE PAGE 2)

3. FINISH: NONE FOR THIS ASSEMBLY.

9.50 u .75

30.00 u .75

FILE DATE: 2018/03/06 FILE NAME: 243546_-_KP-HB CUT SECTION.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243546

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243546

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE FEB2018

A A

SECTION A-A

THESE TWO SURFACES ARE CO- PLANAR u0.05

FILE DATE: 2018/03/06 FILE NAME: 243530_-_ CUT KING POST .dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243530

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243533

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

CUT KING POST

0243530

2017/12/04

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

FOR REFERENCE ONLY

INITIAL DRAWING DEC 2017

91.25 ±.25

10.0 10.0

A

DETAIL A

NOTES: WEIGHT OF ASSEMBLY 380 LBS

1. THIS ITEM WILL BE PROVIDED BY SSC PAC AND TRANSPORTED BY THE VENDER FROM SSC-PAC BAYSIDE CAMPUS SAN DIEGO CA 92106

TO THIER SHOP.

2. THE ITEM HAS BEEN ROUGH CUT AWAY FROM A LARGER ASSEMBLY THE DIMESIONS SHOWN ARE FOR THE CLEAN UP WORK THAT WILL DONE ON THE CUT EDGES. THE CUT EDGES ARE REQUIRED TO BE SQUARE, PLANAR SURFACES +/- .O5 INCH.

3. FINISH: NONE FOR THIS ASSEMBLY.

FILE DATE: 2018/03/06 FILE NAME: 243533_-_ KING POST UPPER ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243533

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243550

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KING POST UPPER ASSY

0243533

2017/12/04

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING APR 2017

NOTES: WEIGHT OF ASSEMBLY 400 LBS

1. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

3. WELD THE KING POST FLANGE AND KING POST GUSSETS TO GOVERNMENT PROVIDED CUT KING POST.

4. FINISH: SAND BLAST STRUCTURE AND APPLY ONE COATS OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY). MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

4 55910 0243532 - KING POST GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 3

1 55910 0243531 - KING POST FLANGE STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0243530 - CUT KING POST (GFE) STEEL, STRUCTURAL 50KSI OR BETTER 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/03/06 FILE NAME: 243533_-_ KING POST UPPER ASSY.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243533

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243533

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE NOV2017

A

A SECTION A-A

1.75

1.75

4.752X

4.752X

1/4

ALL

FILE DATE: 2018/03/06 FILE NAME: 243531_-_KING POST FLANGE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243531

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KING POST FLANGE

0243531

2017/12/04

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

0243533

TPICKERING

FOR REFERENCE ONLY

NOTES: WEIGHT 18 LBS

1. MATERIAL: A36 STEEL PLATE 0.375 IN THK NOMINAL

2. NO FINISH

INITIAL DRAWING FEB 2018

.38

13.50

13.50

.85 ±.024X

4.60 ±.022X

8.90 ±.022X

12.65 ±.024X

.850 ±.024X

4.60 ±.022X

8.90 ±.022X

12.650 ±.024X

O .656 +.02 -.0012X

R .254X

FILE DATE: 2018/03/06 FILE NAME: 243532_-_KING POST GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243532

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243533

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KING POST GUSSET

0243532

2017/12/04

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

0243545

TPICKERING

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: A36 STEEL PLATE 0.5 IN THK (NOMINAL)

2. WEIGHT 1.6 LBS

3. NO FINISH

INITIAL DRAWING FEB2018

8.00

1.50

6.75

.250

.50

2X .3 CHAMFER

45°

FILE DATE: 2018/03/06 FILE NAME: 243535_-_KING POST HEX BOLT ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243535

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243550

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KING POST HEX BOLT ASSY

0243535

2018/02/12

TPICKERING 2018/0306

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: .5 LBS

1. KING POST HEX BOLT (CAP SCREW) ASSY. MCMASTER #'S PROVIDED.

2. FINISH: NONE

1 3A054 94804A351 - HEX NUT TYPE 316 STAINLESS STEEL 4

1 3A054 92146A035 - SPLIT LOCK WASHER TYPE 18-8 STAINLESS STEEL 3

2 3A054 98017A215 - FLAT WASHER MIL SPEC. 300 SERIES SS 2

1 3A054 92186A791 - HEX HEAD CAP SCREW 5/8-11 X2IN LONG TYPE 316 STAINLESS STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/04/30 FILE NAME: 243540_-_KP-HB BLKHD.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243540

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KP-HB BLKHD

0243540

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 265 LBS

1. 50KSI STEEL PLATE, 1.125 IN THK (STOCK MATERIAL CAN BE USED AS LONG AS IT IS FLAT AND PLANAR WITHIN 1/16 IN)

2. FINISH: NONE

1.125 +.03 +.03

22.25

66.00

13.625 ±.03

52.375 ±.03

11.00 ±.05

6.0 ±.05

9.002X

15.625 ±.052X

8X .5 IN CHAMFER

FILE DATE: 2018/04/30 FILE NAME: 243540_-_KP-HB BLKHD.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243540

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243540

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE NOV2017

1.8754X u .03

2.504X u .03

6.1254X u .03

13.3754X u .03

18.8754X u .03

10.754X u .03

55.254X u .03

63.504X u .03

16X O1.31 THRU8.25

44.5

FILE DATE: 2018/03/06 FILE NAME: 243541_-_18 IN RAIL END BULKHD.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243541

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL END BULKHD

0243541

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 90 LBS

1. 50KSI STEEL PLATE, 1.125 IN THK (STOCK MATERIAL CAN BE USED)

2. FINISH: NONE

13.25

22.25

2.504X

10.754X

1.8752X u .03

6.1252X u .03

13.3752X u .03

18.8752X u .03

1.125 NOM

4X .5 CHAMFER

REFERENCE ONLY

O 1.3128X

FILE DATE: 2018/03/06 FILE NAME: 243544_-_18 IN RAIL CLEVIS PLTE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243544

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243543

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL CLEVIS PLTE

0243544

2018/02/11

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 20 LBS

1. 50KSI STEEL PLATE, 1.0 IN THK (NOM)

2. FINISH: NONE

1.0 NOM

10.875 u .03

1.5 u .03

O 1.5 +.05 +.00

5.125 u .03

R 3.625 u .03

37°

8.75

7.25

FILE DATE: 2018/05/01 FILE NAME: 243548_-_18 IN RAIL MOD GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243548

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN RAIL MOD GUSSET

0243548

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

0243543

TPICKERING

0243538

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 6 LBS

1. 50KSI STEEL PLATE, 1.00 IN THK (NOMINAL)

2. FINISH: NONE

6.50

3.12

.25

.75

.25

.75

1.00

FILE DATE: 2018/03/06 FILE NAME: 243549_-_KP-HB END GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243549

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243545

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

KP-HB END GUSSET

0243549

2018/02/10

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 13 LBS

1. 50KSI STEEL PLATE, 1.0 IN THK (NOMINAL)

2. FINISH: NONE

10.00

5.75

1.00

NOM

.75

5.00

.5 IN CHAMFER

45°

FILE DATE: 2018/03/06 FILE NAME: 243571_-_ 1+8TH -7 UNC X 5 SS HEX BOLT ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243571

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243551

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

1.125-7UNC X 5 SS HEX

BOLT ASSY

0243571

2018/02/13

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT: 1 LBS

1. 1.125-7UNC X 5 STAINLESS HEX BOLT ASSEMBLY. MCMASTER #'S PROVIDED

2. FINISH: NONE

1 3A054 94804A039 - 1.125-7 UNC HEX NUT TYPE 316 STAINLESS STEEL 4

2 3A054 92141A039 - 1.25 ID FLAT WASHER TYPE 18-8 STAINLESS STEEL 3

2 3A054 92147A039 - 1.25 ID SPLIT LOCK WASHER TYPE 316 STAINLESS STEEL 2

1 3A054 92186A152 - 1.125-7UNC X5 HEX HEAD CAP SCREW TYPE 316 STAINLESS STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

55910 D SIZE - ASME Y14.100, REV 6-200

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235024

SHEET 1 OF 2

56410

COGNIZANT CODE

0243538

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

DOUBLE CLEVIS WELDMNT

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.

SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -FEB2016--

REV

K.HANSEN FEB2016

N. NGUYEN JUN2017

TPICKERING 29JUN2017

-0235024

NOTES:

1. DOUBLE CLEVIS WELDMENT , 50KSI STEEL

2. WELDS MUST GO COMPLETELY AROUND MATING PARTS TO PREVENT WATER

PENETRATION BETWEEN SURFACES.

3. NO FINISH

1 55910 0235197 - STEEL 50 KSI 50 KSI STEEL 3

2 55910 0235023 - CLEVIS ROUND STEEL, STRUCTURAL 50KSI OR BETTER 2

1 55910 0235022 - STEEL PLATE 1IN THK 50 KSI STEEL 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

2X.375

55910 D SIZE - ASME Y14.100, REV 6-2004

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235024

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235024

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -FEB2016--

REV

0.75 u.03

5.25 u.03

0.38 u.03 2X

4.188

.375

55910 D SIZE - ASME Y14.100, REV 6-200

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1243553

SHEET 1 OF 1

56410

COGNIZANT CODE

0243554

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

SHEAVE SPACER PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.

SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -APR2018--

REV

K.HANSEN APR2018

NA

NA

243553 -

24.00

7.00

1.832X

2.185 ±.02 19.57 ±.02

1.0

NOTES:

1. STEEL PLATE 24X7X1THK, A36

2. WEIGHT 27LBS

3. FINISH:

SAND BLAST STRUCTURE AND APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY).

* MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

O 1.6252X

1.25

4.5

4.25 15.5

R .54X

REFERENCE ONLY

FILE DATE: 2018/03/12 FILE NAME: 243536_-_18 IN SNUB END MFG ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243536

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243551

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN SNUB END MFG ASSY

0243536

2018/02/12

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

NOTES: WEIGHT OF ASSEMBLY 2800 LBS

1. ASSEMBLE THE 18 IN SNUBBER END MFG ASSEMBLY AS SHOWN USING SPECIFIED FASTENERS. MCMASTER PART #'S PROVIDED.

2. FINISH: NONE

16 3A054 0243570 - 1-8 X 3+HALF HEX BOLT ASSY STAINLESS STEEL 3

1 55910 0235263 A RAIL SHEAVE SUPPORT ASSY A500 GRADE B OR C STEEL TUBING 2

1 55910 0243538 - 18 IN SBR EXT WLDMNT STEEL, STRUCTURAL 50KSI OR BETTER 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

FILE DATE: 2018/03/08 FILE NAME: 243538_-_ 18 IN SNUB END WLDMNT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243538

SHEET 1 OF 3

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243536

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN

2018/02/26 0235122

D

THIRD ANGLE PROJECTION

18 IN SNUB END WLDMNT

0243538

2018/02/12

TPICKERING 2018/03/06

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

TPICKERING

INITIAL DRAWING FEB 2018

2 55910 0235024 - DOUBLE CLEVIS WELDMENT STEEL SEE 235024 DRAWING FOR DETAILS 6

1 55910 0235138 A I-BEAM, W12 X 79, 51.5 IN LONG 50 KSI STEEL A992 5

2 55910 0243548 - 18 IN RAIL MOD GUSSET STEEL, STRUCTURAL 50KSI OR BETTER 4

1 55910 0243537 - 18 IN SNUBBER BLKHD STEEL, STRUCTURAL 50KSI OR BETTER 3

2 55910 0235097 A STIFFENER 50 KSI STEEL PLATE 2

2 55910 0235161 A I-BEAM, W12 X 79, 12 FT 6IN LONG 50 KSI STEEL A992 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

NOTES: WEIGHT OF ASSEMBLY 3010 LBS

1. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

3. DYE PENETRANT TEST (PT) REQUIRED AT SPECIFIED LOCATIONS. TESTING PERFORMED BY AWS CERTIFIED WELD INSPECTOR.

4. PROVIDE CERTIFICATION ON DELIVERY FOR ABOVE TESTING.

5. RECOMMENDED FABRICATION APPROACH: BORE HOLES IN I BEAMS AFTER COMPLETION OF WELDING THIS ASSEMBLY

COMPLETE HOLES PER THIS DRAWING AND 0235161

6. FINISH: SAND BLAST STRUCTURE AND APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY). MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING PO

7. DIMENSIONS APPLY PRIOR TO FINISH

FILE DATE: 2018/03/08 FILE NAME: 243538_-_ 18 IN SNUB END WLDMNT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243538

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243538

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE FEB 2018

3/8 2 SMALL

GUSSETS

3/8

3/8

39.92 u0.06

5.562X u .15

150.0

16.00 u .15

3/8 2 LONG

GUSSETS

3.002X u0.06

2.582X u0.06

3/8

2 DOUBLE

CLEVISES

(PT)

A

ASECTION A-A

3.522X u .03 .5242X u .03

1/2

BLKHD TO

I BEAMS

(PT)

5.5402X u .15

FILE DATE: 2018/03/08 FILE NAME: 243538_-_ 18 IN SNUB END WLDMNT.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243538

SHEET 3

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243538

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL RELEASE FEB 2018

24.124X 8.38 4X

5.12 4X

5.12 4X

8.38 4X

2.545X

7.005X

2.545X

7.005X

81.924X 19.004X 35.204X 13.004X

1.294X

9.504X

1.294X

9.504X

O 1.4420X

O 1.2216X

45.00 42.50 42.50

FILE DATE: 2018/03/13 FILE NAME: 235097_A_TRACK EXT STIFFENER.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235097

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.