C1.5 ATTACHMENT 1 - DRAWINGS.pdf

FILE DATE: 2018/07/03 FILE NAME: 235299_REV1_CART FRAME MODIFICATIONS .dft

SHEET 1 OF 5

55910 D SIZE - ASME Y14.100, REV 7-2002

SHDWG. NO. 1

1 REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE WITH

ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION DRAWING NUMBERCAGE CODESIZE

SCALE: 1/20

KHANSEN

D

THIRD ANGLE PROJECTION

0235299

B. WIEDEMEIER2018/06/27

TPICKERING 2018/07/03

02351220235122

NOTES:

1. WEIGHT: ~3500 LBS.

2. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER

AWS D1.1 CLAUSE .

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS.WELDS WITH NO LEAKS

FOR WATER TO PENETRATE BETWEEN SURFACES, WHERE APPLICABLE.

DYE PENETRANT TEST (PT) REQUIRED AT SPECIFIED LOCATIONS. TESTING

PERFORMED BY AWS CERTIFIED WELD INSPECTOR.

5. PROVIDE CERTIFICATION ON DELIVERY FOR ABOVE TESTING.

REMOVE PARTS AS SHOWN AND PREP FOR WELDING.

UPSIDE DOWN AS SHOWN.

RIGHT SIDE UP AS SHOWN.

CART FRAME MODIFICATIONS

0235299

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY; OTHER REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE

AND NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY

ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING 2017/04/24--

56410

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001Systems Center

PACIFIC

ADDED CABLE HANGER BOSSES 27JUN20181-

DRILL 1.563 DIA. TO DIMENSIONS SPECIFIED AFTER WELDING.

OPEN 6 EXISTING HOLES AND DRILL 4 NEW ONES. TO 1.563 DIA.

10. WELD ON CART C-HANGER BOSSES; DRILL 0.625 DIA HOLES IN FRAME. (PG 4)

11. FINISH REQUIREMENTS:

AFTER SAND BLASTING, APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER AND ONE

TOP COAT EPOXY POLYAMIDE; COLOR: HAZE GRAY.

2018/06/27

2 55910 0243534 CART FIRST MOTION BRKT BOSS STEEL, STRUCTURAL 11

2 55910 0243557 CART C-HANGER BOSS BOTTOM STEEL, STRUCTURAL 10

1 55910 0243556 CART C-HANGERS BOSS TOP STEEL, STRUCTURAL 9

1 55910 0243555 CART C-HANGER BOSS FRONT STEEL, STRUCTURAL 8

1 55910 GFE EXISTING CART STRUCTURE STEEL, STRUCTURAL 7

1 55910 0235298 CLEVIS MOUNT ASSY STEEL, STRUCTURAL 6

1 55910 0235297 CART BLOCK UPPER PELICAN STEEL, STRUCTURAL 5

1 55910 0235295 CART MOUNT PLATE STEEL, STRUCTURAL 4

1 55910 0235293 TOP PLATE STEEL, STRUCTURAL 3

4 55910 0235292 CART PLATE STEEL, STRUCTURAL 2

12 55910 0235291 I-BEAM GUSSET STEEL, STRUCTURAL 1

QTY CAGE CODE PART OR IDENTIFYING NUMBER DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND NO.

AS PROVIDED

AS DELIVERED

4 PLACES .38

.254 PLACES .25

.258 PLACES

.25

STEP 1

STEP 2 WELD ON 7X7 PADS

*SEE PG 2 FOR POSITION DETAILS

STEP 3 WELD IN STIFFENERS

AND CART MOUNT PLATE

STEP 4 WELD ON MORE STIFFENERS

STEP 5 WELD ON PIECES AS SHOWN

STEP 5 MORE DETAIL

A

DETAIL A

1:10

2 PLACES

GRIND WELDS AND REMOVE PLATES SUCH

THAT ALL 10 SURFACES ARE THE SAME HEIGHT.

B

DETAIL B

1:10

C

DETAIL C

1:8

2 PLACES

.25

.38

.38

4 4

SHEET 2

55910 D SIZE - ASME Y14.100, REV 3-2003

SHDWG. NO.

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

D

0235299

0235299

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING-- 2017/04/24

ADDED CABLE HANGER BOSSES 27JUN20181-

1.00 1.62

E E

SECTION E-E

30.562X 15.884X

84.564X 15.882X

168.44

31.81

66.25

D D

SECTION D-D

1:10

F

DETAIL F

1:10

(4 PLACES)

6.00

3.50

R .504X

CUTOUT

.50 TYP

54.002X REF

108.002X REF

52.002X u .015

3X (52.00) REF

O 1.56210X DRILL THRU AFTER WELDING

31.502X

.61 TYP

STEP 2 7X7 PAD POSITIONING

85.502X

STEP 6 MACHINE CUT OUTS IN WEB OF CART FRAME AND

DRILL 0.625 HOLES IN CART FRAME (SEE PG 4)

STEP 7 DRILL NEW HOLES IN CART ASSY

27.002X u .015

4.112X u .015

3X (4.11) REF

81.002X u .015

STEP 3 AND 4 STIFFENER POSITIONING

STIFFENER

2X

STIFFENER

2X

STIFFENER

2X

STIFFENER

2X

STIFFENER

STIFFENER

STEP 5 SLOT WELD

STEP 5 POSITIONING

54.0044.31

SHEET 3

55910 D SIZE - ASME Y14.100, REV 3-2003

SHDWG. NO.

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

D

0235299

0235299

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING-- 2017/04/24

ADDED CABLE HANGER BOSSES 27JUN20181-

7.13 .375 STK

R .512X

7.00

7.00

1.250 STK

0235291

0235292

0235293 0235295

0235297

3.50

7.00 .750 STK

8.00

7.00

.750 STK

4.50

2.752X

5.50

O 1.200 THRU

+.010 -.000

1.50

7.00

1.06

3.75

FULL R

26°

1.63

3.75

SHEET 4

55910 D SIZE - ASME Y14.100, REV 3-2003

SHDWG. NO.

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

D

0235299

0235299

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING-- 2017/04/24

ADDED CABLE HANGER BOSSES 27JUN20181-

7.48

9.00

7.24

3.312

10.250

G G

SECTION G-G 90°

.188

.188 .188

H

DETAIL H

5.072X

2.14 3.60

O .6254X

TWO HOLES ON EACH SIDE OF CART

3.50

10.25

5.25 10.25

NOTE: THESE HOLES SHOULD BE DRILLED IN STEP 6

4.14

4.38 8.88 2X

.188

.188

.188

SHEET 5

55910 D SIZE - ASME Y14.100, REV 3-2003

SHDWG. NO.

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

D

0235299

0235299

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING-- 2017/04/24

ADDED CABLE HANGER BOSSES 27JUN20181-

I

DETAIL I

JDETAIL J

FILE DATE: 2018/06/28 FILE NAME: 235298_-_CLEVIS_MOUNT_SUBASSEMBLY.dft

SHEET 1 OF 2

55910 D SIZE - ASME Y14.100, REV 7-2002

SHDWG. NO. 1

1 REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

COGNIZANT CODE

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE WITH

ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

KHANSEN 2017/05/11

D

THIRD ANGLE PROJECTION

0235298

B. WIEDEMEIER2018/06/28

TPICKERING 30JUN2017

02352990235299

NOTES:

1. WEIGHT: 35.6 LBS.

2. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND

PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED. WHERE APPLICABLE,

WELDS MUST GO COMPLETELY AROUND MATING PARTS.

3. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS

D1.1 CLAUSE 6.

4. DYE PENETRANT TEST (PT) REQUIRED AT SPECIFIED LOCATIONS. TESTING

PERFORMED BY AWS CERTIFIED WELD INSPECTOR.

5. PROVIDE CERTIFICATION ON DELIVERY FOR ABOVE TESTING.

6. FINISH: NONE

CLEVIS MOUNT ASSY

0235298

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING 2017/04/24--

56410

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001Systems Center

PACIFIC

CHANGED WELD SYMBOL 2017/04/261-

1 55910 0235296 CART MOUNT, SPACER STEEL, STRUCTURAL 2

2 55910 0235294 CART MOUNT, LOWER STEEL, STRUCTURAL 1

QTY CAGE

CODE

PART OR IDENTIFYING

NUMBER

DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

2.00

HOLES CONCENTRIC WITHIN .010

7.50

5.00

7.75

6.00

1.50

2 PLACES .38

2 PLACES

FILE DATE: 2018/06/28 FILE NAME: 235298_-_CLEVIS_MOUNT_SUBASSEMBLY.dft

SHEET 2

55910 D SIZE - ASME Y14.100, REV 3-2003

SHDWG. NO.

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/2

D

0235298

0235298

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING-- 2017/04/24

CHANGED WELD SYMBOL 2017/04/261-

2.00

8.00

O .750 THRU

+.010 -.003

O s 1.250 X 45v

.250 STK

4.00

1.500 STK

7.50

1.00

7.75

6.00

1.50

O 1.200 THRU

+.010 -.003

FULL R

42°

0235294

0235296

.25 X 45v CHAMFER

.25 X 45v CHAMFER

.50

FILE DATE: 2018/06/30 FILE NAME: 243534_-_CART FIRST MOTION BRKT BOSS.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243534

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420COGNIZANT CODE

0235299

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 28JUN2018

0235122

D

THIRD ANGLE PROJECTION

CART FIRST MOTION BRKT

BOSS

0243534 kyle 2018/06/30

TPICKERING 03JUL2018

2018/06/30.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM A36, 0.875 IN THICK

2. NO FINISH

3. WEIGHT: 0.7 LBS.

28JUN2018INITIAL RELEASE

1.16 +0.01 -0.00

0.88

2.625

0.442X

0.75 1.125

3/8-16 UNC THREAD DEPTH 0.75 `.90

(BLIND)

4X 1/16 CHAMFER

REFERENCE ONLY

FILE DATE: 2018/06/27 FILE NAME: 243555_-_CART C-HANGER BOSS FRONT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243555

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420COGNIZANT CODE

0235299

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 28JUN2018

0235122

D

THIRD ANGLE PROJECTION

CART C-HANGER BOSS

(FRONT)

0243555

KHANSEN 2018/06/27

TPICKERING 03Jul2018

2018/06/27.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

NOTES:

1. MATERIAL: STRUCTURAL STEEL, A36, 0.875 IN THICK NOMINAL

2. NO FINISH

3. WEIGHT: 2.5 LBS.

28JUN2018INITIAL RELEASE

2X 1/2-13 UNC THREAD DEPTH 0.56 `.75

(BLIND)

0.99

R 4.31

5.00

2.00

1.00

0.70 3.60 ±0.02

FILE DATE: 2018/06/28 FILE NAME: 243556_-_CART C-HANGER BOSS TOP.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243556

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420COGNIZANT CODE

0235299

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 28JUN2018

0235122

D

THIRD ANGLE PROJECTION

CART C-HANGER BOSS

(TOP)

0243556

KHANSEN 2018/06/27

TPICKERING 03JUL2018

2018/06/28.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

NOTES:

1. MATERIAL: STRUCTURAL STEEL, A36, 0.875 IN THICK NOMINAL

2. NO FINISH

3. WEIGHT: 2.5 LBS.

28JUN2018INITIAL RELEASE

5.00

2.00

0.88

1.00

0.70 3.60 -0.15 -0.15

2X 1/2-13 UNC THREAD DEPTH 0.56 `.75

(BLIND)

FILE DATE: 2018/06/29 FILE NAME: 243557_-_CART C-HANGER BOSS BOTTOM.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243557

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420COGNIZANT CODE

0235299

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 28JUN2018

0235122

D

THIRD ANGLE PROJECTION

CART C-HANGER BOSS

(BOTTOM)

0243557 kyle 2018/06/27

TPICKERING 03JUL2018

2018/06/29.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

NOTES:

1. MATERIAL: STRUCTURAL STEEL, A36, 0.875 IN THICK NOMINAL

2. NO FINISH

3. WEIGHT: 0.6 LBS.

28JUN2018INITIAL RELEASE

1.50

1.50

0.75

0.75

3/8-16 THREAD DEPTH 0.56 `.70

(BLIND)

0.88