Solicitation_N6449824Q5177_Amendment_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this Amendment is to update the description of CLIN 0001 and update section 3.1.1 of section C.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Sep-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6449824Q5177

X 9B. DATED (SEE ITEM 11)

05-Sep-2024

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Sep-2024

CODE

NAVAL SURFACE WARFARE CENTER PHILA

CODE 0223, TOM COLETTI

215-897-7586, THOMAS.COLETTI@NAVY.MIL

5001 SOUTH BROAD STREET

PHILADELPHIA PA 19112

N64498 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6449824Q5177

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Weekly Coverall Laundering Services IAW the statement of work

To:

Max 60 units per week for Laundering IAW the statement of work

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

Statement of Work (SOW) Fire Resistant Coveralls w/Laundering & Repair Services for the

Naval Foundry and Propeller Center

1.0 INTRODUCTION

1.0.1 The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering and fleet support organization for the Navy’s ships, submarines, military watercraft and unmanned vehicles. This requirement is for Naval Foundry and Propeller Center (NFPC) who is responsible for the design, manufacture, and repair propellers for the US Navy.

1.0.2 This contract is for non-personal services. It does not create employment rights with the U.S. Government whether actual, inherent, or implied.

1.0.3 Government / Contractor Relationship

(a) The services to be delivered under this contract are non-personal services and the parties recognize and agree that no employer-employee relationship exists or will exist under the contract between the Government and the Contractor's personnel. Therefore, it is in the best interest of the Government to provide both parties a full understanding of their respective obligations.

(b) The Contractor employees shall identify themselves as Contractor personnel by introducing themselves or being introduced as Contractor personnel and displaying distinguishable badges or other visible identification for meetings with Government personnel. In addition, Contractor personnel shall appropriately identify themselves as Contractor employees in telephone conversations and in formal and informal written correspondence

(c) Contractor personnel under this contract shall not engage in any of the inherently governmental functions listed at FAR Subpart 7.5 or DFARS Subpart 207.5.

(d) Employee Relationship:

1) The services to be performed under this contract do not require the Contractor or its personnel to exercise personal judgment and discretion on behalf of the Government. Rather the Contractor's personnel will act and exercise personal judgment and discretion on behalf of the Contractor.

2) Rules, regulations, directives, and requirements that are issued by the U. S. Navy and NSWCPD under its responsibility for good order, administration, and security are applicable to all personnel who enter a Government installation or who travel on Government transportation.

This is not to be construed or interpreted to establish any degree of Government control that is inconsistent with a non-personal services contract.

(e) Inapplicability of Employee Benefits: This contract does not create an employer-employee relationship. Accordingly, entitlements and benefits applicable to such relationships do not apply.

(f) Notice. It is the Contractor's, as well as the Government's, responsibility to monitor contract activities and notify the Contracting Officer if the Contractor believes that the intent of this Section has been or may be violated.

1) The Contractor should notify the Contracting Officer in writing within three (3) calendar days from the date of any incident that the Contractor considers to constitute a violation of this Section. The notice should include the date, nature, and circumstances of the conduct; the name, function, and activity of each Government employee or Contractor official or employee involved or knowledgeable about such conduct; identify any documents or substance of any oral communication involved in the conduct; and the estimate in time by which the Government must respond to this notice to minimize cost, delay, or disruption of performance.

2) The Contracting Officer will, within five (5) calendar days after receipt of notice, respond to the notice in writing. In responding, the Contracting Officer will either:

(i) Confirm the conduct is in violation and when necessary direct the mode of further performance,

(ii) Countermand any communication regarded as a violation,

(iii) Deny that the conduct constitutes a violation and when necessary direct the mode of further performance, or

(iv) In the event the notice is inadequate to make a decision, advise the Contractor what additional information is required, and establish the date by which it should be furnished by the Contractor.

1.1 BACKGROUND

Fire Resistant Coveralls are used by The Naval Foundry and Propeller Center (NFPC) to promote a healthy industrial work environment and help keep clean and eliminate wear on personal clothing. Fire-resistant clothing helps prevent serious injuries by providing a barrier between the worker's skin and the heat source. It also reduces the severity of burns if an accident does occur. NFPC is in need of Fire-Resistant Coveralls along with subsequent laundering and repairing service throughout its facility for their coveralls.

1.2 SCOPE OF WORK

This scope of work comprises of weekly onsite pickup, launder services, necessary repair services, delivery of the clean laundered coveralls, and possible procurement of replacement fire resistant coveralls. The contractor shall launder, maintain, inspect, and repair the coveralls in accordance with the specifications listed in paragraph 3.0. The coveralls provided are for all personnel requiring fire rated coveralls at NFPC. Upon contract completion, all coveralls purchased shall be sole property of NFPC.

Please Note: The contractor shall bill the Government and will pay, only for the actual supplies/services received and accepted by the Government POC.

The CLIN structure shall be the following:

CLIN Description QTY Unit of Issue

1 Weekly Coverall Laundering Services 1 Lot – FFP 3,120 EACH

2 Coverall Repair Service 1 Lot – FFP - NTE 500 EACH

CLIN Description Size QTY Unit of Issue

3 Fire Resistant Coveralls X-Small, 32, Reg 6 Each

4 Fire Resistant Coveralls Small, 34, Reg 6 Each

5 Fire Resistant Coveralls Small, 36, Long 6 Each

6 Fire Resistant Coveralls MED, 38, Short 6 Each

7 Fire Resistant Coveralls MED, 40, Short 6 Each

Fire Resistant Coveralls (Including Additional)

MED, 38, Reg 18 Each

Fire Resistant Coveralls (Including Additional)

MED, 40, Long 24 Each

10 Fire Resistant Coveralls Large, 44, Short 6 Each

Fire Resistant Coveralls (Including Additional)

Large, 42, Reg 30 Each

12 Fire Resistant Coveralls Large, 44, Reg 12 Each

Fire Resistant Coveralls (Including Additional)

Large 42, Long 24 Each

Fire Resistant Coveralls (Including Additional)

X-Large, 48, Reg 72 Each

Fire Resistant Coveralls (Including Additional)

X-Large, 46, Long

14 Each

Fire Resistant Coveralls (Including Additional)

X-Large, 48, Long

36 Each

17 Fire Resistant Coveralls X-Large, 46, X-

Long 6 Each

18 Fire Resistant Coveralls 2XL, 50 Short 12 Each

19 Fire Resistant Coveralls 2XL, 52 Short 6 Each

Fire Resistant Coveralls (Including Additional)

2XL, 50, Reg 90 Each

Fire Resistant Coveralls (Including Additional)

2XL, 52, Reg 78 Each

22 Fire Resistant Coveralls 2XL, 50, Long 6 Each

Fire Resistant Coveralls (Including Additional)

2XL, 52, Long 42 Each

24 Fire Resistant Coveralls 2XL, 50, X-Long 6 Each

25 Fire Resistant Coveralls 2XL, 52, X-Long 6 Each

26 Fire Resistant Coveralls 3XL, 54, Reg 6 Each

27 Fire Resistant Coveralls 3XL, 56, Reg 6 Each

Fire Resistant Coveralls (Including Additional)

3XL, 56, Long 24 Each

29 Fire Resistant Coveralls 4XL, 58, Long 12 Each

30 Fire Resistant Coveralls 5XL, 62, Long 6 Each

31 Fire Resistant Coveralls 7XL, 72, Reg 6 Each

Contractor shall provide the requested Fire-Resistant Coveralls to NFPC 30 days or earlier after contract has been awarded.

This requirement shall be awarded as an unpriced purchase order pursuant to FAR 13.302-2 Unpriced Purchase Order.

2.0 APPLICABLE DOCUMENTS

The following documents should be used in the purchasing and determination of specifications:

NFPA 2112

ATSM D6413

ATMS F2302

29 CFR 1910.331, OSHA Electrical Safety Requirements

NFPA Standard 70E, 2015, Electrical Safety in the Workplace NFPA Standard 70E, 2013, Selection, Care, Use and Maintenance of Flame-Resistant

Garments for Protection of Industrial Personnel against Flash Fire, Various NFPA Standard 70E, 2012, Flame Resistant Garments for Protection against Flash Fire, Various ASTM F 1506-02, Standard Performance Specification for Flame Resistant Textile

Materials for Wearing Apparel for Use by Electrical Workers to Momentary Electric Arc and Related Thermal Hazards, Various

ASTM F 1449-08, Standard Guide for Industrial Laundering of Flame, Thermal and Arc Resistant Clothing, Various

3.0. REQUIREMENTS

3.0.1 Fire Resistant Coverall specifications

5.5 oz. (185 g/m²) TenCate Evolv Flame-Resistant Navy-Blue Fabric. Actual color shall be approved by the government.

Coveralls shall have Mandarin style, stand up, two-way safety collar.

Concealed adjustable snap closure on wrist cuff at top of the neck.

Side leg patch pockets for storage.

Elastic waist inserts and deep pleated back for ease of mobility and comfort.

Have two front pockets and two chest pockets with flaps or concealed snap closures.

Coveralls shall be flame resistant (ATPV 8.5 Fire Rating) and must meet performance requirements CAT 2 AR/FR protection and NFPA 2112 compliance

3.0.2 All coveralls will be individually identified and tracked by a barcode system or equivalent to identify the specific wearer to whom they are issued. All coveralls will have the employee’s name visible on a tag above the left front pocket.

3.0.3 If needed, coveralls which were originally identified to a specific individual may be re-identified to a new employee if authorized by the Government Technical Representative. This shall only occur with coveralls that are maintained in good condition during the contract period.

3.0.4 The contractor shall submit invoices for all delivered coveralls. The contractor shall submit invoices utilizing the proper Wide Area Workflow (WAWF) procedures.

3.1 Launder Services

3.1.1 The contractor shall be responsible for providing weekly laundering services for fire resistant coveralls currently owned by NFPC. The Government expected rate of laundering may vary in quantity but is not expected to exceed 45 to 60 pairs of fire resistant coveralls to be laundered per week.

3.1.2 The contractor and NFPC authorized Government Technical Representative shall mutually agree upon a pick-up date of the week within one (1) week after award of contract. The initial delivery may be made any day of the week, Monday through Friday, between the hours of 7:00 AM and 2:00 PM. However, once a day is established, the same delivery day shall be maintained every week, except on Government observed holidays.

3.1.3 The contractor shall provide adequate laundry bags, rolling bins or other means of collecting the soiled coveralls. The contractor shall be responsible for picking up the coveralls on-site at a designated location and transport off-site for laundering and/or repair service.

3.1.4 The contractor shall complete the laundering services and return the coveralls back to NFPC within seven (7) days. The coveralls shall be laundered in accordance with standard commercial laundering practice to ensure cleanliness and fire rating is maintained. This shall continue for the term of the contract.

3.1.5 The coveralls shall be washed, dried, separated by employee name/barcode and packaged to prevent the items from being soiled in transit upon delivery.

3.1.6 The coveralls shall be delivered to the specified location where initial pickup occurred. The deliveries shall be of an equal quantity and size as that of the soiled pick up; a one for one exchange in size and quantity.

3.1.7 The coveralls will be inventoried at the delivery point at the time of pick-up and delivery by an authorized Government representative and the contractor’s representative. The contractor shall bear the responsibility of replacing any coveralls that are lost or damaged while in their possession. The contractor will also inform the NFPC point of contact of any damage or missing coveralls on a monthly basis.

3.1.8 The contractor shall bill, and the Government will compensate only for the actual number of coveralls picked up and laundered per week as reviewed and accepted by the Government

POC.

3.2 Repair Services

3.2.1 During the laundering process, if the contractor identifies a pair of coveralls that require repair, the contractor shall contact the Government Technical Representative within 24 hours after identification and shall provide them with evidence of the damage. After review, the Government Technical Representative shall authorize direction on whether to repair, continue to launder the coverall, or to return the coverall back to the Government.

3.2.2 A repair is defined as the following examples:

● Any inoperable zipper or fastener

● Any linear tear exceeding 1¾” inches in length.

● Any accumulation of tears exceeding ¾” and linear repairs which exceeds 30% of the garment.

3.2.3 Any required repairs outside of the scope of section 3.2.2 will be considered beyond repair.

If a coverall is considered beyond repair, the contractor shall adhere to the procedures listed in section 3.2.4.

3.2.4 If the contractor identifies a pair of coveralls that are beyond repair, the contractor shall contact the Government Technical Representative within 24 hours after identification. The contractor shall provide the Government Technical Representative with evidence of the damage.

After review, the Government Technical Representative shall authorize direction on whether to scrap the coverall or return the coverall back to the Government.

3.2.5 The contractor shall bill, and the Government will compensate only for the actual number of coveralls that were laundered within the picked up quantity per week.

3.2.6 The contractor shall bill the Government and pay, only for the actual number of coveralls repaired as reviewed and accepted by the Government POC.

3.3 Additional Coveralls

3.3.1 In cases where the identified fire resistant coveralls are deemed unrepairable and the contractor provides the Government Technical Representative with evidence of the damage, the Government Technical Representative shall authorize a replacement pair to be purchased and placed in service.

3.3.2 Replacement of damaged coveralls are not to occur automatically. The Government Technical Representative shall authorize a replacement pair if needed after receipt of evidence identified in Section 3.15.

3.3.3 If a new employee is hired by NFPC, the Government is authorized to order the new coveralls under coverall CLINs. The Government shall provide the contractor with the appropriate size and quantity. The contractor shall ensure the new employee’s coveralls adhere to the requirements.

3.3.3.1. The contractor shall provide sizing coveralls ranging from 36 to 62 in regular and long lengths. The quantity and size of these coveralls shall not exceed 10 pairs in various sizes. The Government shall ensure that new employees are sized immediately upon their availability.

3.3.3.2. The Government estimates possible procurement need of 150 each ranging from the sizes of 34 through 48, and 60 each ranging from the sizes of 50 through 68. These coveralls will be utilized after sizing any new employees who requires coveralls or possible replacement coveralls.

3.3.3.3. The contractor shall manufacture the coveralls in adherence to characteristics and features as stated in section 3.4. The contractor shall fully conform to the delivery schedule listed in section 6.0.

3.3.3.4. If the employee’s coverall does not fit upon arrival, the contractor shall provide alteration services.

3.3.4. The contractor shall bill, and the Government will only compensate, for the actual number of coveralls ordered. The contractor shall submit invoices utilizing proper Wide Area Workflow (WAWF) procedures.

4.0 DATA REQUIREMENTS

Not Applicable.

5.0 SECURITY REQUIREMENTS

5.1 The contractor shall be escorted onto the site, observed while they perform the work, and escorted off the site.

5.2 Escorted visit. Escorted visits are required for any person who is not assigned to NNSY/NFPC and/or does not have a valid security clearance. Visitors will be escorted at all time by an NFPC employee and no exposure to any classified open storage areas or material. Requests for escorted access must be submitted 5 working days prior to arrival. If it is service or maintenance that needs to be done or an emergency the request needs to be submitted immediately in order to allow for ample time for proper vetting of individual/individuals requesting access.

The requesting NFPC code/shop will coordinate the visit and security code 1123 will verify two forms of Government issued identification. The responsible code shall provide escort during the contractor’s visit.

Acceptable documents include:

US Birth Certificate (original) US Voters registration US Passport (Home Land security), Transportation Workers Identification Credential (TWIC) Naturalization paperwork Driver’s License Social Security Card

Installation Access for Visitors/Contractors

All visitors/contractors having a valid purpose for access shall submit a completed and signed Form 5512/1 to their identified Government sponsor 14 working days prior to the date of their required visit.

The entire document shall be completed and form dated/signed by the visitor/contractor.

Visitor/Contractor shall retain a copy of the form 5512/1 to present on the first day at the installation.

The visitor/contractor shall communicate all on-site day to day schedules and schedule changes to the NFPC base sponsor to be submitted to code 1123 in a detailed security plan.

Note: It is critical that start/end dates/work hours are identified, accurate, and short term visitors/contractors are not granted extended or after-hours access if not required Reporting to PNY-A for the first time.

Visitor/Contractor Responsibility

Visitor/Contractor shall report to the location designated by their sponsor (Security Office or other designated location, Pass and ID office) or if operating a Commercial Vehicle requiring inspection; to the Vehicle Inspection Station.

Visitor/Contractor shall present their completed and signed 5512/1.

The Sentry or Security Assistant shall verify vetting is cleared and issue the appropriate passes. If visitor/contractor has not completed the 5512/1 their access will be delayed until they correct the form.

Code 1123 will review request and when acceptable notify requesting NFPC code/shop to arrange visit.

5.3 Contractor Vehicle Parking: (OPNAV 5530.14E) All contractor commercial vehicles must be visually inspected at Lot 753 prior to entry into any NFPC buildings and are subject to random inspections anywhere on the compound.

Vehicles must clearly display an authorized company sign or logo including a company phone number. Vehicles must only be allowed in the compound for transportation of contractors' tools, parts, and materials to and from the work site with the exception of MILCON scope projects. Vehicles must be registered to the company and not to an individual.

Parking of POV's is available at Lot 753, which is approximately one mile from the work site. Contractor shall ensure that their vehicles, including delivery trucks, have valid and current vehicle registration and insurance upon arrival to NFPC. Non-valid and outdated or missing vehicle registration and insurance shall result in denied facility access requiring the Contractor to reschedule delivery immediately at the contractor’s expense. Delivery drivers must present two forms of Government issued identification.

5.4 PEDs (Portable Electronic Devices) are not allowed in areas where work is being performed.

Should the Contractor require a laptop, tablet or other similar device on-site to fulfill the Scope of Work, the Contractor must complete an asset authorization form for each device and submit the devices to code 109 for inspection and approval prior to site access. The laptops cannot have camera capabilities. Procedures regarding laptop access are subject to change.

PEDs (Portable Electronic Devices) are PROHIBITED:

In Restricted Areas (Open Storage Confidential Areas, Secure Rooms, Vaults, etc.) and any location (office, trailer, shop, work area, etc.) where NAVSEA business is conducted.

PEDs are permitted in Personally Owned Vehicles parked outside of the Controlled Access Area. (General parking lots across the street.)

Cell Phones/Smart Watches/Fitness Bands/ Wireless Headsets and Speakers are permitted in outside areas of the CAA and where Naval Sea Systems Command (NAVSEA) business of a sensitive nature is NOT conducted. Cell Phones, Smart Watches, Fitness Bands or Wireless Headsets and Speakers are prohibited in the OSC Areas.

PEDs are PROHIBITED in Secure Rooms (regardless of where any of these areas are located), and in any meeting, discussion or forum where NAVSEA business of a sensitive nature is carried on.

Cellphone lockers/boxes will be placed at the entrance to facilities, or as close to the entrance as possible in order to facilitate this policy.

********CAA-Controlled Access Area is anywhere within the fence line********

5.5. The contractor shall adhere to the facility/base access guidance per the following website:

https://www.cnic.navy.mil/regions/cnrma/om/contractor_verification_system/faqs.html

5.6. The contractor shall ensure that only contractor employees who meet the security requirements stated below perform under this contract at the Government site (e.g. delivery drivers and passengers, etc.). The contractor shall propose and maintain a list of employees whom meet these requirements and be willing to submit this list to the Government, along with the necessary documentation to prove they meet them (e.g. the results of a contractor conducted background check, etc.), for the Government’s security vetting, to include any Government background check, and approval. Once vetted and approved, a list of approved contractor employees must be maintained for the entire period of performance of the contract (i.e. propose new employees, replace existing employees or provide updates to existing employees’ records, as necessary). A minimum of two employees, primary and backup, should be cleared by the Government to perform the necessary functions under this contract (e.g. proposed drivers of a delivery vehicle) throughout the entire period of performance of the contract. Contractors must have the ability to be granted access by ensuring current documentation is available at the submission of their proposal to allow background checks for any proposed driver and passenger under the following criteria:

Felony conviction of any type within 10 years, or felony arrest that has not been adjudicated yet (includes "deferred findings").

Misdemeanor conviction or on-base arrest within 5 years, for any of the following types of crimes (includes "deferred findings"): Crimes of violence, sexual assault, larceny, drugs, or a habitual offender.

On the Sex Offender Registry.

Is barred from any Navy installation.

If a contractor’s employee is denied entry at delivery due to inaccurate or outdated personal and/or vehicle documentation, the Government is absolved of any costs accrued as a result of the denial and the contractor is still pledged to fulfill the contract requirements. Failure to fulfill the contract requirement may result in a termination for default pursuant to FAR 49.4.

5.7 OPERATIONS SECURITY (OPSEC)

The Contractor shall protect critical information associated with this contract to prevent unauthorized disclosure.

NFPC’s Critical Information List, (CIL) will be provided on site, if warranted. Performance under this contract requires the contractor to adhere to OPSEC requirements. The Contractor may not impose OPSEC requirements on its subcontractors unless NFPC approves the OPSEC requirements. During the period of this contract, the Contractor may be exposed to, use, or produce, NFPC Critical Information (CI) and/or observables and indicators which may lead to discovery of CI. NFPC CI will not be distributed to unauthorized third parties, including foreign governments, or companies under Foreign Ownership, Control, or Influence (FOCI) ) unless such FOCI has been appropriately mitigated through measures approved by the Defense Counterintelligence and Security Agency.

CUI correspondence transmitted internally on the contractor's unclassified networks or information systems, and externally, shall be protected per NIST SP-800-171, Protecting Controlled Unclassified Information (CUI) in Non-federal Systems and Organizations.

Assembled large components/systems being transported to and from testing areas, other production or government facilities (whether or not on public roadways) shall be in an enclosed van trailer or covered flatbed trailer.

Component/System outside storage, staging, and test areas shall be shielded/obscured from public view wherever physically possible.

NFPC’s CI shall not be publicized in corporate wide newsletters, trade magazines, displays, intranet pages or public facing websites. Media requests related to this project shall be directed to the PCO, and the COR who will forward the required to the NFPC Public Release Authority for review.

Any attempt by unauthorized third parties to solicit, obtain, photograph, or record, or; incidents of loss/compromise of government Classified or CI, Business Sensitive, Company Proprietary information related to this or other program must be immediately reported to the contractor's Facility Security Officer and Cognizant Security Office and/or the Naval Criminal Investigative Service, and the NFPC Security Division (Code 1123). Questions concerning these requirements shall be directed to the PCO, and the COR who will forward the request to the NFPC Security Division (Code 1123).

5.8 RECEIPT, STORAGE, AND GENERATION OF CONTROLLED UNCLASSIFIED INFORMATION

(CUI)

All Controlled Unclassified Information (CUI) associated with this contract must follow the minimum marking requirements of DoDI 5200.48, Section 3, paragraph 3.4.a, and include the acronym "CUI" in the banner and footer of the document. In accordance with DoDI 5200.48, CUI must be safeguarded to prevent Unauthorized Disclosure (UD). CUI export controlled technical information or other scientific, technical, and engineering information must be marked with an export control warning as directed in DoDI 5230.24, DoDD 5230.25, and Part 250 of Title 32, CFR. Nonfederal information systems storing and processing CUI shall be protected per NIST SP-800-171, or subsequent revisions. All transmissions to personal email accounts (AOL, Yahoo, Hotmail, Comcast, etc.) and posting on social media websites (Facebook, Instagram, Twitter, LinkedIn, etc.) are prohibited. Destroy CUI associated with this contract by any of the following approved methods: A cross-cut shredder; a certified commercial destruction vendor; a central destruction facility; incineration; chemical decomposition; pulverizing, disintegration; or methods approved for classified destruction.

6.0 PLACE OF PERFORMANCE

6.1.1 Delivery will occur at the following government site:

Naval Foundry & Propeller Center 2003 Constitution Ave Philadelphia Navy Yard Philadelphia, PA 19112

6.1.2 The specific location will be provided at time of award. The Contractor shall provide a list of employees who require access to these areas, including standard security clearance information for each person, to the Code 1120 Security Personnel no later than three business days after the date of award. The work space provided to the Contractor personnel shall be identified by the Awardee, with appropriate signage listing the company name and individual Contractor employee name.

6.1.3 Access to Government buildings at Naval Foundry & Propeller Center is from 0730 to 1800 Monday through Friday, except Federal holidays. Normal work hours are from 0730 to 1800, Monday through Friday. Contractor employees shall be under Government oversight at all times. Government oversight requires that a Government employee be present in the same building/facility whenever Contractor employee(s) are performing work under this contract.

Contractor personnel are not allowed to access any Government buildings at NFPC outside the hours of 0730 to 1800 without the express approval of the Procuring Contracting Officer (PCO).

6.1.4 Early Dismissal and Closure of Government Facilities

When a Government facility is closed and/or early dismissal of Federal employees is directed due to severe weather, security threat, or a facility related problem that prevents personnel from working, onsite Contractor personnel regularly assigned to work at that facility should follow the same reporting and/or departure directions given to Government personnel. The Contractor shall not direct charge to the contract for time off, but shall follow its own company policies regarding leave. Non-essential Contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal and during periods of inclement weather, onsite Contractors should monitor radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site Contractors will continue working established work hours or take leave in accordance with parent company policy. Those Contractors who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, and closings in accordance with the FAR, applicable cost accounting standards, and company policy. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The PCO will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy.

7.0 TRAVEL

Not applicable.

8.0 GOVERNMENT FURNISHED PROPERTY

Not applicable.

9.0 GOVERNMENT FURNISHED INFORMATION

10.0 PURCHASES

Not applicable.

11.0 COUNTERFEIT MATERIAL PREVENTION

11.1 Non-Electronic Materials

11.1.1 Department of the Navy contractors (and their subcontractors at all tiers) who obtain critical or high risk materiel shall implement a risk mitigation process as follows:

11.1.2 If the materiel is currently in production or currently available, materiel shall be obtained only from authorized suppliers

11.1.3 If the materiel is not in production or currently available from authorized suppliers, materiel shall be obtained from suppliers that meet appropriate counterfeit avoidance criteria

11.1.4 Contractor shall notify the contracting officer when critical or high risk materiel cannot be obtained from an authorized supplier;

11.1.5 Contractor shall take mitigating actions to authenticate the materiel if purchased from an unauthorized supplier

11.1.6 Contractor shall report instances of counterfeit and suspect counterfeit materiel to the contracting officer and the GIDEP as soon as the contractor becomes aware of the issue.

12.0 PERSONNEL

13.0 ENTERPRISE-WIDE CONTRACTING MANPOWER REPORTING

APPLICATION (ECMRA)

Not applicable.

14.0 NSWCPD ELECTRONIC COST REPORTING AND FINANCIAL TRACKING

(ECRAFT) SYSTEM

Not applicable.

15.0 SPECIAL REQUIREMENTS

(End of Summary of Changes)