N6449821Q0097U0002.docx

N6449821Q0097

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 07-May-2021 05:00 PM to 04-Aug-2021 12:00 AM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

Statement of Work (SOW) for Tensioner Cylinder

1.0 INTRODUCTION

1.0.1 The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering and fleet support organization for the Navy’s ships, submarines, military watercraft and unmanned vehicles. The Deployed Antenna and Mast Engineering Branch (Code 437) and the Sail, Hull & Deck Machinery Systems Division (Code 43), provide In Service Engineering support for submarine towed and mast antenna Hull, Mechanical, and Electrical (HM&E) systems for the United States. This requirement is for a system within Code 437.

1.1 BACKGROUND

One of the main components of the current system is the Tensioner Assembly. The next generation Tensioner Assembly, including the cylinder, has been redesigned to accommodate new requirements.

1.2 SCOPE OF WORK

The Contractor shall fabricate, machine, provide inspection compliance documentation, and deliver three (3) Tensioner Cylinders, Part Number 8713871-1. Delivery will be in one lot of three (3) production units.

2.0 APPLICABLE DOCUMENTS

The Contractor shall reference and utilize the latest version available when performing tasks within this SOW. These documents are available upon request.

3.0. REQUIREMENTS

3.1 Production Units

3.1.1 The contractor shall fabricate and deliver three (3) Tensioner Cylinders, Part Number 8713871-1 production units.

3.1.2 The contractor shall perform a Certificate of Compliance as specified in CDRL A002. Contractor shall provide Certificate of Compliance photos with a Certificate of Compliance report.

3.1.2.1 Approval of the Certificate of Compliance by the Contracting Officer is required prior to delivery of productions units.

3.1.3 The Contractor shall use specified materials in accordance with the drawings. Proposed material and process substitutions will not be considered by the Government at this time.

3.2 The Contractor shall submit a production status report concerning production status as specified in CDRL A001.

3.3 Tensioner Weldment Delivery.

3.3.1 The Contractor shall deliver all three (3) completed and inspected Tensioner Cylinders, Part Number 8713871-1 to the following location:

Naval Surface Warfare Center- Philadelphia Division Building 542 542 Langley Avenue, Philadelphia, PA 19112 Attn: Ed Carter, Code 402

(267) 398-3315

4.0 DATA REQUIREMENTS

4.1 Contractor’s Progress and Status Report (CDRL A001)

4.1.1 This report shall reflect prime contractor data concerning schedule and delivery only.

4.1.2 The CDRL shall be delivered electronically, unless otherwise stated, and while Contractor’s format is acceptable, Government’s approval is required from the COR.

4.2 Inspection Compliance Documentation (CDRL A002)

4.2.1 The CDRL shall be delivered electronically, unless otherwise stated or data is being submitted in eCRAFT, and while Contractor’s format is acceptable, Government’s approval is required from the COR. This report shall reflect both prime and subcontractor data if applicable at the same level of detail.

5.0 SECURITY REQUIREMENTS

5.1 OPERATIONS SECURITY (OPSEC)

5.1.1 The Contractor shall protect critical information associated with this contract to prevent unauthorized disclosure. The NSWC Philadelphia Division's (NSWCPD) Critical Information List (CIL)/ CIIL (Critical Indicators and information list) will be provided on site, if warranted. Performance under this contract requires the contractor to adhere to OPSEC requirements. The Contractor may not impose OPSEC requirements on its subcontractors unless NSWCPD approves the OPSEC requirements. During the period of this contract, the Contractor may be exposed to, use, or produce, NSWCPD Critical Information (CI) and/or observables and indicators which may lead to discovery of CI. NSWCPD’s CI will not be distributed to unauthorized third parties, including foreign governments, or companies under Foreign Ownership, Control, or Influence (FOCI).

5.1.2 CUI correspondence transmitted internally on the contractor's unclassified networks or information systems, and externally, shall be protected per NIST SP-800-171, Protecting Controlled Unclassified Information (CUI) in Non-federal Systems and Organizations.

Assembled large components/systems being transported to and from testing areas, other production or government facilities (whether or not on public roadways) shall be in an enclosed van trailer or covered flatbed trailer. Component/System outside storage, staging, and test areas shall be shielded/obscured from public view wherever physically possible.

5.1.3 NSWCPD’s CI shall not be publicized in corporate wide newsletters, trade magazines, displays, intranet pages or public facing websites. Media requests related to this project shall be directed to the PCO, and the COR who will forward the required to the NSWCPD Public Release Authority for review.

5.1.4 Any attempt by unauthorized third parties to solicit, obtain, photograph, or record, or; incidents of loss/compromise of government Classified or CI, Business Sensitive, Company Proprietary information related to this or other program must be immediately reported to the contractor's Facility Security Officer and Cognizant Security Office and/or the Naval Criminal Investigative Service, and the NSWC PD Security Division (Code 105). Questions concerning these requirements shall be directed to the PCO, and the COR who will forward the request to the NSWC PD Security Division (Code 105).

5.2 RECEIPT, STORAGE, AND GENERATION OF CONTROLLED UNCLASSIFIED INFORMATION (CUI) (REQUIRED to be included for all SOWS)

All Controlled Unclassified Information (CUI) associated with this contract must follow the minimum marking requirements of DoDI 5200.48, Section 3, paragraph 3.4.a, and include the acronym "CUI" in the banner and footer of the document. In accordance with DoDI 5200.48, CUI must be safeguarded to prevent Unauthorized Disclosure (UD). CUI export controlled technical information or other scientific, technical, and engineering information must be marked with an export control warning as directed in DoDI 5230.24, DoDD 5230.25, and Part 250 of Title 32, CFR. Nonfederal information systems storing and processing CUI shall be protected per NIST SP-800-171, or subsequent revisions. All transmissions to personal email accounts (AOL, Yahoo, Hotmail, Comcast, etc.) and posting on social media websites (Facebook, Instagram, Twitter, LinkedIn, etc.) are prohibited. Destroy CUI associated with this contract by any of the following approved methods: A cross-cut shredder; a certified commercial destruction vendor; a central destruction facility; incineration; chemical decomposition; pulverizing, disintegration; or methods approved for classified destruction.

6.0 PLACE OF PERFORMANCE

All work shall be performed at the contractor’s facility.

7.0 TRAVEL

Not applicable.

8.0 GOVERNMENT FURNISHED PROPERTY

Not applicable.

9.0 GOVERNMENT FURNISHED INFORMATION

Government shall provide NAVSEA Drawing Number 8713871 – Tensioner Cylinder.

10.0 PURCHASES

Not applicable.

11.0 COUNTERFEIT MATERIAL PREVENTION

Not applicable.

12.0 PERSONNEL

Not applicable.

13.0 NSWCPD ELECTRONIC COST REPORTING AND FINANCIAL TRACKING (ECRAFT) SYSTEM

Not applicable.

14.0 SPECIAL REQUIREMENTS

Not applicable.

(End of Summary of Changes) image1.wmf