13_BN_Redacted.pdf

1 | 7

REV 11-2023

BRAND NAME/SOLE SOURCE JUSTIFICATION (SAM) SAT

LIMITED-SOURCES JUSTIFICATION (GSA) SAT

JUSTIFICATION FOR AN EXCEPTION TO FAIR OPPORTUNITY

(ID/IQ TASK ORDER/DELIVERY ORDER) SAT

1. Description of Supplies/Services.

Part # DESCRITION Brand QTY LB2-6B9-C G4 LABCULTURE Gen 4 Class II Type B2 Biosafety

Cabinets, Energy Efficient ECM blower, 115VAC, 60HZ, cUL Listed, NSF Listed, 7" Touch Screen Controller & Airflow Monitor, LED Lamp, 6ft Size, External: 80.0"W x 33.5"D x 63.3"H. Customized with: separate power lines from cabinet: 15 Amps max for combined outlets, and etched tray NSF downflow grid. Put 2x SF-2U Service Valves and Copper piping in box for future use.

ESCO

Technologies

STA-6A0 6ft Stand, adjustable height with pins at either 28" or 35" only with no increments, sitting & standing height, Caster Wheels and Leveling feet combo, Open back design for plumbing ease and no shelf, Shipped flat

ESCO

Technologies

Tray Grid Single Tray upcharge for LB2-6B2-E-C with etched NSF 49 Downflow Grid

ESCO

Technologies

IUID Label IUID Label ESCO Technologies

Gauge Block Gauge Block for LB2 G4 ESCO Technologies

Probe Holder Probe Holder for LB2 G4 ESCO Technologies

Velocity Meter TSI Velocity Meter 9535 ESCO Technologies

PLASTEC P30-

4/3/60 B2 Exhaust Blower

PLASTEC 30-4 Blower, P30ST4P150-CCW, NON- EXPLOSION RESISTANT, CCW, 1.5 Hp, D.D.

forward Curved, H.E TEFC UL Listed IP55 rated motor, UV Treated, Seamless Polypropylene material const., scroll housing, Assembled & Tested Orientation: 360 voltage:

208V. Suitable for Class II B2 BSC

ESCO

Technologies

MB30SS 316 Stainless Steel Support Stand, Matte Finish stand, flanged, pre-punched, 14" Height, with stainless steel hardware. Serving certain Plastec P25 and P30 Excludes Weather Cover. Hot and dry climate

ESCO

Technologies

EG250 Exhaust Guard w/Bird Screen, 250mm ESCO Technologies

VFD D30020 3.0 HP VFD, 200V-240V/1-phase or 3-phase input , 200-240V/3-phase output, IP20/UL/CE Rated, MODBUS Comms., Factory Programmed. Voltage:

208V. Suitable for all FH and all BSC

ESCO

Technologies

Reducer 156-

156-1210, Flexible PVC Reducer/Coupling 12” PVC to

10” PVC

ESCO

Technologies

2 | 7

The requested supplies services represent the minimum requirements of the Government, which have been verified by the certifying technical and requirements personnel.

2. Regulatory Authority Permitting Other Than Full and Open Competition.

SAM

FAR 13.106-1(b)(i) Soliciting from a single source

FAR 13.106-1(b)(ii) Particular brand-name item

GSA

FAR 8.405-6(a)(i)(1)(A) An urgent and compelling need exists

FAR 8.405-6(a)(i)(1)(B) Only one source is capable of providing the supplies or services required at the level of quality required because the supplies or services are unique or highly specialized

FAR 8.405-6(a)(i)(1)(C) In the interest of economy and efficiency, the new work is a logical follow-on to an original Federal Supply Schedule order provided that the original order was placed in accordance with the applicable Federal Supply Schedule ordering procedures (the original order or BPA must not have been previously issued under sole-source or limited-sources procedures).

FAR 8.405-6 (b) Items peculiar to one manufacturer (brand-name item) ID/IQ Task Order/Delivery Order (e.g. NASA SEWP or ARMY CHESS)

FAR 16.505(b)(2)(i)(A) The agency need for the supplies or services is so urgent that providing a fair opportunity would result in unacceptable delays.

FAR 16.505(b)(2)(i)(B) Only one awardee is capable of providing the supplies or services required at the level of quality required because the supplies or services ordered are unique or highly specialized

FAR 16.505(b)(2)(i)(C) The order must be issued on a sole-source basis in the interest of economy and efficiency because it is a logical follow-on to an order already issued under the contract, provided that all awardees were given a fair opportunity to be considered for the original order. [When utilizing this exception, the rationale shall describe why the relationship between the initial order and the follow-on is logical (e.g., in terms of scope, period of performance, or value).]

FAR 16.505(b)(2)(i)(D) It is necessary to place an order to satisfy a minimum guarantee.

FAR 16.505(b)(2)(i)(E) For orders exceeding the simplified acquisition threshold, a statute expressly authorizes or requires that the purchase be made from a specified source.

FAR 16.505(b)(2)(i)(F) In accordance with section 1331 of Public Law 111-240 ( 15 U.S.C.

644(r)), contracting officers may, at their discretion, set aside orders for any of the small business concerns identified in 19.000(a)(3). When setting aside orders for small business concerns, the specific small business program eligibility requirements identified in part 19 apply.

x

5 | 7

CERTIFICATION

I certify that the facts and representations under my cognizance, which are included in this justification and its supporting data/documentation, are complete and accurate to the best of my knowledge and belief.

APPROVALS

I certify that the Customer representations above have been verified, and are complete and correct to the best of my knowledge. I understand that the processing of this brand name/sole-source justification precludes the use of full and open competition.

CONTRACT ADMINISTRATOR/SPECIALIST:

I certify that this justification is accurate and complete to the best of my knowledge and belief, and that completing this purchase as a brand name/sole source is in the best interest of the Government.

CONTRACTING OFFICER:

Name, Title, Code Phone No. Date

For the reasons set forth in paragraphs 3 and 4 of this Justification, Corona Division has no plans at this time to compete future contracts for the type of supplies/services covered by this document. If another potential source emerges, the Corona Division will assess whether competition for future requirements is feasible.

BLAKELY.JAMES.LADANIEL.1165679098 Digitally signed by BLAKELY.JAMES.LADANIEL.1165679098 Date: 2026.06.08 08:14:53 -07'00'