Amendment_N6426726Q40820001.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section A - Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Response Due Date 09 Jun 2026 12 Jun 2026

N6426726Q40820001

Section C - Description/Specifications/Statement of Work

Miscellaneous text in this section has been modified to:

SALES TAX EXEMPTION

The contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

Purchase Description

1. INTRODUCTION

The Naval Surface Warfare Center Corona Division (NSWC CORDIV), Range Systems (RS) Department, Division RS10 requires an RF analyzer.

2. BACKGROUND

RS10 requires the procurement of an RF analyzer.

3. REQUIREMENTS

The vendor shall provide the following items. All accessories and options must be fully compatible with the requested RF Analyzer.

Items shall be equivalent to the following, salient characteristics THIS IS A BRAND NAME OR EQUAL REQUIREMENT.

provided.

Contract Line Item Number

Qua ntit y

U n it

Description Brand

Name or Equal

Part N umber

0001 1

E a c h

10 GHz RF Analyzer. Shall include following capabilities /options:

- Vector network analyzer time domain, transmission /reflection, full 2-port S-parameters

- Spectrum analyzer

- Pre-amplifier

- Interference analyzer and spectrogram

- GPS receiver

- DC bias variable-voltage source

- Channel scanner

Keysight N9915 C

0002 4

E a c h

Battery, rechargeable Li-Ion 70WH Keysight N9910 X-876

0003 1

E a c h

Antenna, telescopic whip, 70 MHz - 1 GHz Keysight N9910 X-821

0004 1

E a c h

External battery charger Keysight N9910 X-872

0005 1

E a c h

AC / DC power adapter for US / Canada / Europe Keysight N9910 X-877

0006 1

E a c h

Rugged phase-stable cable, type-N(m) to type-N(m), 18 GHz,

3.28 ft or 1 m Keysight N9910

X-701

0007 1

E a c h

Antenna, GPS, active Keysight N9910 X-825

0008 1

E a c h

Coaxial adapter, Type-N (f) to Type-N (f), 18 GHz Keysight N9910 X-851

0009 1

E a c h

Hard transit case Keysight N9910 X-881

All material shall comply with the Trade Agreements Act (TAA).

The Vendor shall provide pricing, part numbers and specification sheet for the listed equipment identified in CLINs 0001 to 0009 listed on the table.

3.1 Salient Characteristics

The RF Analyzer and accessories shall meet the following specifications:

3.1.1 CLIN 0001 RF Analyzer and integrated options

- Frequency Range: Shall operate continuously from 3 kHz to 10 GHz, minimum.

- System Impedance: 50 W (nominal), 75 W with adapter

- Cable and Antenna Tester: shall measure Return Loss, Distance-to-Fault, one-port Cable Loss, and Open-Short-Load.

- Vector Network Analyzer shall include:

- Full 2-port vector network analysis with support for all four S-parameters (S11, S21, S12, S22) and 2-port calibration.

- Time-domain analysis capabilities for S11 and S21.

- Measurements for S21 magnitude and phase for 2-port insertion loss and response calibration.

- Spectrum Analyzer capability shall:

- Provide spectrum analysis functions including occupied bandwidth, channel power, and AM/FM tune-and-listen demodulation

- Include tracking generator

- Provide spectrogram and waterfall displays with trace recording and playback, for interference analysis.

- Provide a channel scanner to monitor multiple frequencies.

- Provide integrated preamplifier delivering at least +20 dB of nominal gain

- The unit shall include an integrated GPS receiver for providing accurate location, time, and frequency reference data

- The tester shall include adjustable DC Bias voltage source, with output from +1 to +32V.

- Unit shall be portable and rugged for transport in harsh field environments:

- Ingress protection: Shall be dust and water-resistant. Shall comply with IP53 rating per IEC 60529 standard

- Shock and vibration: Shall be hardened against shock and vibration in accordance with IEC 60068-2 standards (or equivalent).

- Operating temperature: Shall operate on battery power in ambient temperatures ranging from at least 14F to 122F.

- Weight shall not exceed 8 lbs

- Dimensions shall not exceed 12" H x 8" W x 4" D.

3.1.2 RF Analyzer Accessories

These accessories or equivalent items shall be compatible with the analyzer procured under CLIN 001.

- CLIN 0002: Battery - Shall be a high-capacity rechargeable Lithium-Ion battery (minimum 70 Wh), capable of providing at least 4 hours of continuous operational runtime.

- CLIN 0003: Telescopic whip antenna, shall operate in frequency range of 70 MHz to 1 GHz, minimum

- CLIN 0004: Standalone external charger for batteries used by CLIN 001 and should be compatible with CLIN 002.

- CLIN 0005: Shall include an AC/DC power adapter compatible with United States, Canadian, and European power standards.

- CLIN 0006: Shall be a ruggedized, phase-stable test cable. Shall feature Type-N male connectors on both ends, support frequencies up to 18 GHz, and be approximately 3 feet in length, minimum.

- CLIN 0007: GPS Antenna - Shall be an active GPS antenna with a physical connector compatible with the analyzer's integrated GPS receiver.

- CLIN 0008: Shall be a precision coaxial adapter, Type-N female to Type-N female, rated for continuous operation up to 18 GHz.

- CLIN 0009: Transit case for CLIN 001. Shall be a heavy-duty, hard-shell transit case designed to securely house the analyzer, adapters, and cables. Requirements shall include:

- Retractable tow handle and built-in wheels for transport.

- Custom-fitted protective foam inserts.

- Maximum exterior dimensions shall not exceed 23" L x 19" W x 12" D.

- Empty weight shall not exceed 20 lbs.

(End of text)

USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as "protected information". File room management services consist of any of the following:

secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics.

However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

(End of text)

PERMITS AND RESPONSIBILITIES

The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses and permits for complying with any applicable Federal, State, and Municipal laws, codes, and regulations for shipping and transportation including, but not limited to, any movement over public highways of overweight/over dimensional materials.

(End of text)

CORONA DIVISION, 1999 FOURTH STREET

NORCO, CA 92860

UNITED STATES

Brian Staub, Email: brian.a.staub2.civ@us.navy.mil Telephone: 9513935960 AdminBy:

SCD: PAS: