12. Draft PD.pdf
PDF 469 KB Posted
- Attached to
- MS35 RH System Cable & Power Supply Federal contract opportunity
- Solicitation number
- N6426725Q4153
About this file
This document is a Purchase Description for a federal contract opportunity involving custom cables and power supplies for the Naval Surface Warfare Center (NSWC), Corona Division. The procurement requires fourteen (14) Custom Cables & Power Supply with USB or RS-232 Communication for Mensor CPT6020 Pressure Sensor, specifically part number CPT6020-COMKIT from RH Systems. The cables are essential for the NAVSEA Calibration Standards (CALSTD) Program and are highly specialized for compatibility with Mensor pressure sensors 0020509001 and 002059002, which are part of the RH Systems model CGS240N. The shipping destination is MCAS, Beaufort, SC 29904, and multiple details such as period of performance, place of performance, and technical point of contact are currently marked as "To Be Determined" (TBD).
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 | 2
PURCHASE DESCRIPTION
RH SYSTEMS CUSTOM CABLE & POWER SUPPLY FOR USB OR RS-232 COMMUNICATION WITH
CPT6020 PRESSURE SENSOR
1. INTRODUCTION
Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science Department, Code MS35, requires the acquisition of fourteen (14) Custom Cables & Power Supply for USB or RS-232 Communication with Mensor CPT6020 Pressure Sensor.
2. BACKGROUND
Measurement Science Department Corona has a requirement to provide Test and Measurement Diagnostic Equipment (TMDE) and/or associated components for the NAVSEA Calibration Standards (CALSTD) Program to support the Navy Calibration Laboratories with calibration standard test equipment and/or support of test equipment.
The cables on this request are for the NAVSEA (CALSTD) Program to issue to various Navy Calibration Laboratories. Theses custom cables and power supply are essential for calibrating the Mensor pressure sensors 0020509001 and 002059002. These sensors are part of the RH Systems model CGS240N. These cables are highly specialized for compatibility with both the Mensor 002059001 and 0020509002 sensors and the RH Systems model CGS240N in regards to specification of thread count, number of pins and connectivity. These cables must be able to work with the CGS240N system built by RH Systems.
In order to meet the requirements, the equipment listed in the paragraph 3 is required.
3. REQUIREMENTS
VENDOR: RH Systems
DESCRIPTION QTY P/N
Custom Cable & Power Supply for USB or RS-232 Communication with Mensor CPT6020 Pressure Sensor
14 E/A
CPT6020-COMKIT
Shipping – MCAS, Beaufort, SC 1 AU N/A
2 | 2
ADDITIONAL INFORMATION
A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES
B. PLACE OF PERFORMANCE
C. SHIPPING ADDRESS
D. INSPECTION AND ACCEPTANCE
E. TECHNICAL POINT OF CONTACT
TBD
TBD
Beaufort SC 29904
File details come from the government source that posted it. Updated .