8_DRAFT SOW.pdf

1 | 2

PURCHASE DESCRIPTION

1. INTRODUCTION

The Naval Air Systems Command (NAVAIR) Metrology and Calibration (METCAL)

Program has a requirement to procure a Pratt & Whitney LMU1000M Labmaster Universal (AKF) and a Pratt & Whitney LMM-1219 Laser Measuring Machine

2. BACKGROUND

The Pratt & Whitney LMU1000M Labmaster Universal and LMM-129 Laser Measuring

Machine are used to calibrated master gage blocks, thread rings, thread plugs, thread wires and pin gages.

3. REQUIREMENTS

3.1 QTY 1: Pratt & Whitney P/N: U308100 Labmaster Universal LMU1000M.

3.1.1 U306277 Ruby Tipped Probes: 1-49” (25-1245mm) ID, 0-48” (0-1220mm) OD

3.1.2 U306513 Horseshoe

3.1.3 U306280 Horseshoe clamp

3.1.4 U306496 Table Clamp (3)

3.1.5 U306519 Rotating Locating Post /Small (2)

3.1.6 U307538 Rotating Location Post /Large (2)

3.1.7 U307741 Table Adapter (2)

3.1.8 U307858 Slot Protector Set

3.1.9 SC-TR Factory Set-up & Training. Includes: Set-up and 3-days training

3.1.10 U306276 Internal Single Probe: 0.02”, 0.079”, 0.157”, 0.236” balls

3.1.11 U600127 0.040-0.125” (1.00-3.18 mm) Internal Dual Probes

3.1.12 U306434 0.125-0.250” (3.18-6.35 mm) Internal Dual Probes

3.1.13 U306435 0.250-1.000” (6.35-25.4 mm) Internal Dual Probes

3.1.14 U306488 Probe Reference

3.1.15 U308508 Digital Adjustable Force System

3.1.16 U306465 Probe Positioner

3.1.17 U307602 Precision Probe Positioner

3.1.18 U307630 Flat Probes

3.1.19 D10512010 Torque Wrench

3.1.20 U306517 Ball Checker (to check parallelism on Flat Probes)

3.1.21 U306399 Tapered Flat Probes (1 degree, 47 minutes)

3.1.22 306905 Tapered Master Plug (used with Tapered Flat Probes)

3.1.23 U302595 Magnetic Wire Holders

3.1.24 307775 V-Block (each)

3.1.25 307775 V-Block (each)

3.1.26 U306512 Riser Disc Assembly (set of 3)

3.1.27 D10543004 High Precision Adjuster

3.1.28 U306514 Backstop

3.1.29 U306515 Angle Block

3.1.30 U306516 Dual Horseshoe Clamp

2 | 2

3.1.31 306691 V-Block for Cylinders/Discs

3.1.32 U305754 Remote Control Foot Switch

3.1.33 U308037 Granite Surface Plate (72"x27"x6") and Steel Support Stand

3.1.34 U307417 Color Printer with Cable

3.1.35 D10586024 Air Compressor with Accessories

3.2 QTY 1: Pratt & Whitney P/N: U307549 Laser Measuring Machine LMM-1219.

3.2.1 302558 Extra Flatted Cylinder

3.2.2 U302590 Elevating Table (single axis)

3.2.3 U307816 Elevating Table (dual axis; large surface area with t-slots)

3.2.4 U308400 Quick Table Clamp (each) (used with dual axis table only)

3.2.5 U307774 Roller Vee (each)

3.2.6 U302595 Magnetic Wire Holders

3.2.7 PWI-10751D Air Sensor w/15 meter cable

3.2.8 PWI-10757F Material Sensor w/25 meter cable

3.2.9 D10063012 USB Sensor Hub (required if sensors are purchased)

3.2.10 U307417 Color Printer with Cable

3.2.11 D10501027 Flat Panel/LCD Stand

3.2.12 S303573 Dial Indicator Bracket

3.2.13 U307528 Thread-Micrometer Standard Measuring Kit

3.2.14 U307574 Spherical Adapters – Ball diameter 0.375” (9.5mm)

3.2.15 U307798 Sine Block Fixture 0.06 to 3 inch (measuring taper pipe threads)

3.2.16 U308047 Sine Block Kit (> 3 inch) (requires 2 elevating tables)

3.2.17 U308020 Master Cylinders: 0.125” & 0.75” (for measuring thread wires)

3.2.18 302660 Wood Bed Way Cover 15” (381mm)

3.3 Operator/Service Manual. A Technical manual for the operation and/or service of the system shall be provided in accordance with CDRL T001.

3.4 Calibration Certification and/or Certificate of Conformance Reporting. A calibration certification with calibration data or certificate of conformance shall be provided with each part number in accordance with CDRL A001.

3.5 Instrument Calibration Procedure. The Original Equipment Manufacturer’s (OEM) ICP shall be provided for calibrating the system in accordance with CDRL A002.

3.6 Software/Firmware Version Description. The contractor shall provide the US Government the release and/or version number of each item of firmware and software included in the calibration standard in accordance with CDRL A003.

3.7 Software/Firmware Change Request. When an item of firmware or software needs to be changed a Software/Firmware Change Request shall be submitted to the US Government in accordance with CDRL A004.

3 | 2

3.8 A Training Syllabus utilizing the Technical Manual(s) (CDRL T001) for training shall be provided to the Government in accordance with CDRL A005.

3.9 Warranty. The manufacturer shall provide the minimum commercial warranty for the system of at least one (1) calendar year from date of shipment.

3.10 Warranty Sticker. Each current system shall have a sticker affixed to the outside of the unit enclosure.

3.11 Serialization. All units shall have unique serial numbers.

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

The period of performance shall be 360 days from the award date of the contract award.

B TECHNICAL POINT OF CONTACT

TBD