draft Purchase Description.pdf
PDF 146 KB Posted
- Solicitation number
- N6426725Q4074
About this file
This document is a draft Purchase Description for a pre-solicitation (N6426725Q4074) issued by the Naval Surface Warfare Center (NSWC), Corona Division, seeking materials and services for frequency-dependent metrology of chip-scale mechanical ultra-low frequency antennas. The procurement requires 12 pieces of TRSX2B PMN-PT [011] cut materials, 2 deposits of 500nm FeGa on PMN-PT, and characterization services including Scanning Quantum Interference Device (SQUID) magnetometry under various electric field strengths.
The minimum requirements specify 10 units of FeGa with a complex thin film stack structure (Copper/PMN-PT/Copper/FeGa/Copper), with magnetic properties to be measured across different electric field strengths. Delivery is expected within 8 weeks to the NSWC facility in Norco, California. The pre-solicitation is voluntary, with no formal solicitation at this time, and the government is exploring potential small business set-asides or full and open competition. Interested parties are invited to submit responses via email, with no telephone inquiries accepted.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 | 2
PURCHASE DESCRIPTION
Pre-Solicitation: N6426725Q4074
Frequency-dependent Metrology of Chip-scale Mechanical Ultra-Low Frequency Antennas
1. INTRODUCTION
2. BACKGROUND
3. REQUIREMENTS
ADDITIONAL INFORMATION
A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES
B. PLACE OF PERFORMANCE
C. SHIPPING ADDRESS
Naval Surface Warfare Center (NSWC), Corona Division requires material to produce antennas.
Naval Surface Warfare Center (NSWC), Corona Division has identified this material and product as essential for understanding the capabilities of evolving technology to support the mission.
DESCRIPTION QTY
Materials Required to Produce Antenna Devices:
1- TRSX2B PMN-PT [011] cut 2x1x0.5mm One side polished 12 EA 2- Deposit 500nm of FeGa on 6 pieces of PMN-PT 2 EA
SERVICES
Characterization of Magnetoelectric Material Properties:
1- Scanning QUantum Interference Device (SQUID) magnetometry of 1 sample from 1 FeGa deposition run under Electric Fields of 0, 0.2, 0.3, & 0.6 MV/m 2 EA
Minimum Requirements:
10 units of FeGa with a Thin Film Stack Structure:
Copper (50 nm)/ PMN-PT (X2B) [011] / Copper (50 nm) / FeGa (500 nm) / Copper (50 nm)
Magnetic properties under applied electric fields measured by Scanning Quantum Interference Device (SQUID) magnetometry for two independent samples from deposition runs #1 & #2:
- FeGa magnetization in units of emu/cc for magnetic field sweeps from -150 Oe to 150 Oe under electric field strengths of 0 MV/m (no applied electric field), 0.2 MV/m, 0.3 MV/m, & 0.6 MV/m applied to the copper electrodes of the FeGa thin film structure.
Delivery within 8 weeks
N/A
1999 Fourth Street Bldg 204 Norco, CA 92860-5000
2 | 2
D. INSPECTION AND ACCEPTANCE
E. TECHNICAL POINT OF CONTACT
TBD
TBD
File details come from the government source that posted it. Updated .