8. Draft PD for SS 25Q4052.pdf

PURCHASE DESCRIPTION

WISSv5 MPT-90 Pan & Tilt Positioner Kit System

1. INTRODUCTION

2. BACKGROUND

3. REQUIREMENTS

The contractor shall provide the following supplies listed below:

SALIENT CHARACTERISTICS

0001 - Pan/Tilt PTZ Camera Assembly

1. Lens

i. Zoom Range: 60x optical zoom, with a focal length range from 33.4mm to

2000mm

ii. Sensor: 1/1.8 in Global shutter CMOS sensor

iii. Iris Control: auto and manual iris, with an aperture range of f/3.5 to f/16

iv. Stabilization: (Analog optical image stabilization) System that counteracts vibrations and reduces image blur

v. Focus: autofocus and manual focus with assist features for precision at long distances

vi. Detection Range:

a. Human detection: Greater than 20 miles

vii. Build: Rugged design for 24/7 outdoor operation

CLIN Part Number Description QTY

0001 TBD

Pan/Tilt PTZ Camera Assembly, including all salient characteristics listed below. 6

0002 TBD Controller Joystick Unicom LT-Ruggedized, including all salient characteristics listed below. 6

Naval Surface Warfare Center (NSWC) Corona Division, Range Systems (RS) Department, requires various telecommunications hardware components in support of the Weapons Impact Scoring Set (WISS) program.

The requested Pan & Tilt Kit System Hardware is required by NSWC Corona Division.

2. Camera

i. Resolution: 2mp (1920x1080) with full HD video output or higher

ii. Output: HD-SDI (uncompressed video output) for real-time, low latency monitoring

iii. Low Light Sensitivity: Minimum illumination of .01 lux or better

iv. Shutter speed: Adjustable electronic shutter for precise exposure control

v. Pelco D Protocol: integrated support for PTZ control over RS-232 or RS-485

3. Enclosure

i. Material: Aluminum or Stainless steel, designed for harsh environments.

ii. Environmental Protection:

iii. IP66 or better dust and water protection

iv. Operates in temperatures from -40C to 60 C

4. Optical Glass

i. Anti-Reflective coating for minimal light loss

ii. Wiper system to clean the glass

5. Connectivity

i. HD-SDI Pass-through to ensure robust, uncompressed video output.

ii. Power and control wiring designed to integrate with Pelco D systems

6. Pan-Tilt Unit

i. Payload Capacity: Supports up to 90lbs accommodating the lens, camera, and enclosure

ii. Pan-Tilt Speed:

a. Pan ranges from at least .2-60 degrees/s

b. Tilt ranges from at least .2-30degrees/s

iii. Pan-Tilt Range:

a. Pan: continuous 360 degree rotation

b. Tilt: 120 degrees of tilt

iv. Precision:

a. Minimum increment of .01 degree.

b. Repeatable presets for automated patrol routes

v. Control: fully compatible with the Pelco D protocol over rs-485 or rs-232 for PTZ operation

vi. Environmental protection:

vii. IP67 rated for outdoor durability

viii. Shock and vibration resistant design

ix. Corrosion-Resistant Coatings for long-term use in harsh or coastal environments

x. Shock Resistance: vibration-tolerant enclosure and PTZ unit ensure stable video capture

7. System integrations

i. All components shall function cohesively to ensure the seamless integration and achievement of the above characteristics.

0002 - Joystick

8. System integrations

i. Joystick shall integrate with the camera assembly and allow for all functionality listed above.

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

B. PLACE OF PERFORMANCE

C. SHIPPING ADDRESS

D. INSPECTION AND ACCEPTANCE

E. TECHNICAL POINT OF CONTACT

60 days ARO.

N/A

DODAAC: N64267

Naval Surface Warfare Center Corona Division 1999 Fourth Street, Bldg. 204 Norco, CA 92860

Inspection and acceptance will be completed by NSWC Corona, RS10N1 Technical Engineers.

TBD