The file's text, extracted by GovTribe without its formatting.
STATEMENT OF WORK
Measurement Science and Engineering Department Drill Fixtures
1. INTRODUCTION
The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division (MS20) builds and maintains Navy Interface Gages for ship-launched missiles, surface and underwater munitions, air-launched missiles, and strategic weapons including fleet ballistic missile systems and subsystems.
2. BACKGROUND
Naval Sea Systems Command (NAVSEA) Integrated Weapons System (IWS) code 3L has a requirement to procure five (5) Drill Fixtures with the option for two (2) more Drill Fixtures in support of the MK41 Launcher, which is a modular launcher concept that can accommodate different canisters in various modules.
3. SCOPE
4. The Contractor shall manufacture and deliver one (1) Drill Fixture every three months After Receipt of Order (ARO) for a total of five (5) Drill Fixtures with options for two (2) additional Drill Fixtures to be delivered one (1) in CY 2026 and one (1) in CY 2027.
5.
4. APPLICABLE DOCUMENTS
4.1 Government Documents
| Drawing |
| Drawing Number |
| Document Title |
| 1 |
| 5223030_NOR 032 (NSWC2-1405) |
| Plate, Identification |
| 2 |
| 5223030_NOR033_(FVLS2-2341)_appr_01162019 |
| Plate, Identification |
| 3 |
| 5223030H |
| Plate, Identification |
| 4 |
| 5496688_NOR_002 |
| Screw Panhead, Shoulder |
| 5 |
| 5496688B |
| Screw Panhead, Shoulder |
| 6 |
| 5496971_NOR 002 |
| Screw, Jack |
| 9 |
| 5496996_NOR_005 |
| Punch, Center |
| 10 |
| 5496996_NOR_003 |
| Punch, Center |
| 11 |
| 5496996_NOR_004 |
| Punch, Center |
| 12 |
| 5496996A |
| Punch, Center |
| 13 |
| 5497476-Bushing Drill |
| Bushing, Drill |
| 14 |
| 5497476_NOR 001 (VRN0483-01) |
| Bushing, Drill |
| 15 |
| 5497476_NOR 002 (VR14688-01) |
| Bushing, Drill |
| 16 |
| 5497478 rev-Handle, Pull Pin |
| Handle, Pull Pin |
| 17 |
| 5497478nor001 |
| Handle, Pull Pin |
| 18 |
| 5497609D (PL) |
| Parts List |
| 19 |
| 5497609D |
| Module Assy, Fxtr Inst and Drill |
| 20 |
| 5597854_NOR 005 |
| Fixture, Inst, and Drill Wldmt |
| 21 |
| 5597854_NOR 006 |
| Fixture, Inst, and Drill Wldmt |
| 22 |
| 5597854_NOR 007(MVLS2-2449R1) |
| Fixture, Inst, and Drill Wldmt |
| 23 |
| 5597854_NOR 008 (MVLS2-3754) |
| Fixture, Inst, and Drill Wldmt |
| 24 |
| 5597854B PL |
| Fixture, Inst, and Drill Wldmt |
| 25 |
| 5597854B |
| Fixture, Inst, and Drill Wldmt |
| 26 |
| 5598168- Table, Plate |
| Table, Plate |
| 27 |
| 5598168_NOR 001 (VR11355) |
| Table, Plate |
| 28 |
| 5599023- Table, Plate |
| Table, Plate |
| 29 |
| 5599023nor001 |
| Table, Plate |
| 30 |
| 5599024- Table, Plate |
| Table, Plate |
| 31 |
| 5599024nor001 |
| Table, Plate |
| 32 |
| 5599096-Table, Plate |
| Table, Plate |
| 33 |
| 5599096_NOR 001 (VR11355) |
| Table, Plate |
| 34 |
| 5599106_NOR 001 (FVLS-1662R1) |
| Pin, Pull |
| 35 |
| 5599106_NOR 002 (MVLS2-3765) |
| Pin, Pull |
| 36 |
| 5599106_NOR_003_(NSWC2-1821) |
| Pin, Pull |
| 38 |
| WS19143_SCN10_(MVLS2-4337)_appr_05062022 |
| Vertical Launching System |
| 39 |
| WS19143B |
| Process Specification for Fusion Arc Welding of Steels |
| 40 |
| WS19143B_SCN1 |
| Vertical Launching System |
| 41 |
| WS19143B_SCN2 |
| Vertical Launching System |
| 42 |
| WS19143B_SCN3 |
| Vertical Launching System |
| 43 |
| WS19143B_SCN4 |
| Vertical Launching System |
| 44 |
| WS19143B_SCN5 |
| Vertical Launching System |
| 45 |
| WS19143B_SCN6 |
| Vertical Launching System |
| 46 |
| WS19143B_SCN 7 (MVLS2-3869) |
| Launching System, Vertical MK41 MOD’s all |
| 47 |
| WS19143B_SCN 8 (NSWC2-1515) |
| Vertical Launching System |
| 48 |
| WS19143B_SCN009_(NSWC2-2063R3)_appr_04052021 |
| Vertical Launching System |
| 49 |
| WS19185_SCN 003 |
| Process Specification for Marking of Items |
| 50 |
| WS19185_SCN 004 |
| Process Specification for Marking of Items |
| 51 |
| WS19185_SCN 005 |
| Process Specification for Marking of Items |
| 52 |
| WS19185_SCN 006 |
| Process Specification for Marking of Items |
| 53 |
| WS19185_SCN08_(NSWC2-2062R6)_appr_10252021 |
| Vertical Launching System |
| 54 |
| WS19185B- Process Specification for Marking Items |
| Process Specification for Marking Items |
| 56 |
| WS19185B_SCN 007 (MVLS2-3261) |
| Vertical Launching System |
| 57 |
| WS19201D- Process Specification for Application of Epoxy Polyamide Paint |
| Process Specification for Application of Epoxy Polyamide Paint |
| 58 |
| WS19201D_SCN 1 (NSWC2-1193) |
| Vertical Launching System |
| 59 |
| 5496685_NOR 002 |
| Target, Optical Alignment |
| 60 |
| 5496685A |
| Target, Open Alignment |
| 61 |
| 5497842- Headless, Liner |
| Specification Control Drawing |
| 62 |
| 5497482_NOR 001 (VRN0491-01) |
| Headless, Liner |
| 63 |
| WS19176A |
| Process Specification for Bonding with Adhesive Epoxy Two Part General Purpose |
| 64 |
| WS19177_SCN 2 (VRN0839-01) |
| Material Specification for Epoxy Adhesive Kit |
| 65 |
| WS19177_SCN 3 (VR14557A01) |
| Material Specification for Epoxy Adhesive Kit |
| 66 |
| WS19177_SCN 4 (MVLS2-1757R1) |
| Material Specification for Epoxy Adhesive Kit |
| 67 |
| WS19177A |
| Material Specification for Epoxy Adhesive Kit |
| 68 |
| WS20173rev |
| Material Specification for Adhesive Epoxy Structural |
| 69 |
| WS20173_NOR 1 |
| Material Specification For Adhesive Epoxy Structural |
| 70 |
| WS20173_NOR 2 |
| Material Specification for Adhesive Epoxy Structural |
| 71 |
| WS20173_NOR 3 |
| Material Specification for Adhesive Epoxy Structural |
| 72 |
| WS20173_NOR 4 |
| Material Specification for Adhesive Epoxy Structural |
| 73 |
| WS20173_SCN 1 (NOR 5) |
| Material Specification for Adhesive Epoxy Structural |
| 74 |
| WS20174A |
| Process Spec for Bonding with Structural Epoxy Adhesive |
| 75 |
| WS20174A_SCN 1(MVLS2-815) |
| Application Requirements for Bonding with a Structural Epoxy Adhesive |
| 76 |
| WS20174A_SCN 2 (FVLS2-1990) |
| 77 |
| WS20175 |
| Material Specification for Adhesive Primer Corrosion Exhibiting |
| 78 |
| WS20175 (NOR 001) |
| Adhesive Primer, Corrosion Inhibiting |
| 79 |
| WS20175 (NOR 001) |
| Material Specification for Adhesive Primer, Corrosion Inhibiting |
| 80 |
| WS20175 SCN1 (NOR 003) |
| Adhesive Primer, Corrosion Inhibiting |
| 83 |
| WS20175 SCN2 (NOR 004) |
5. REQUIREMENTS
The Offeror shall manufacture and deliver five (5) Drill Fixtures with the option for two (2) additional Drill Fixtures in accordance with the drawings provided as Government Furnished Information (GFI). One (1) Drill Fixture will be required every three months ARO for a total of five (5) Drill Fixtures. Additionally, one (1) Drill Fixture may be required in CY 2026 and one (1) Drill Fixture may be required in CY 2027.
ADDITIONAL INFORMATION
A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES
Five (5) Drill Fixtures will be required at a rate of one (1) every three months ARO.
Two (2) additional Drill Fixture may be required. One (1) may be required in CY26 and one (1) may be required in CY27.
B. PLACE OF PERFORMANCE
Work to be performed at contracted vendor facility.
C. SHIPPING ADDRESS
Naval Surface Warfare Center Gage Laboratory Bldg 575 1999 Fourth Street Norco, Ca 92860-1915
D. INSPECTION AND ACCEPTANCE
Part 5597854 (Installation and Drill Weldment Fixture) must be inspected by NSWC Corona prior to Painting. Parts 5496996 (Center Punch) and 5599106 (Pull Pin) must be sent to NSWC Corona for dimensional inspection prior to final acceptance. Pins and Punches will be returned to vendor for shipment with the fixture. Onsite Final Visual inspection and inventory is required by NSWC Corona prior to shipment to final destination.
Inspection:
Carlos Cruz, MS23 1999 Fourth Street Norco, CA 92860-5000 Phone: (951) 393-5206 Email: carlos.f.cruz3.civ@us.navy.mil
Acceptance:
Sunmi Kim, MS02 1999 Fourth Street Norco, CA 92860-5000 Phone: (951) 393-5206 Email: Sunmi.kim2.civ@us.navy.mil
E. TECHNICAL POINT OF CONTACT
Carlos Cruz, MS23 1999 Fourth Street Norco, CA 92860-5000 Phone: (951) 393-5206 Email: carlos.f.cruz3.civ@us.navy.mil
