23R0029_SOW_VLS Drill Fixture.pdf

1 | 4

STATEMENT OF WORK

Measurement Science and Engineering Department Drill Fixtures

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division (MS20) builds and maintains Navy Interface Gages for ship-launched missiles, surface and underwater munitions;

air-launched missiles and strategic weapons including fleet ballistic missile systems and subsystems.

2. BACKGROUND

Naval Sea Systems Command (NAVSEA) Integrated Weapons System (IWS) code 3L has a requirement to procure ten (10) Drill Fixtures in support of the MK41 Launcher which is a modular launcher concept that can accommodate different canisters in various modules.

3. SCOPE

4. The Contractor shall manufacture and deliver ten (10) Drill Fixtures. Four (4) Drill Fixtures will be required 6 months after contract award with the option to procure (2) additional fixtures each year for three (3) years in accordance with the drawings listed below.

5.

4. APPLICABLE DOCUMENTS

4.1 Government Documents

Drawing Drawing Number Document Title 1 5223030_NOR 032 (NSWC2-1405) Plate, Identification

2 5223030_NOR033_(FVLS2-

2341)_appr_01162019 Plate, Identification

3 5223030H Plate, Identification 4 5496688_NOR_002 Screw Panhead, Shoulder 5 5496688B Screw Panhead, Shoulder 6 5496971_NOR 002 Screw, Jack 5496971A_PL Screw, Jack

8 5496971A Screw, Jack

2 | 4

9 5496996_NOR_005 Punch, Center 10 5496996_NOR_003 Punch, Center 11 5496996_NOR_004 Punch, Center 12 5496996A Punch, Center 13 5497478 rev-Handle, Pull Pin Handle, Pull Pin 14 5497478nor001 Handle, Pull Pin 15 5497609D (PL) Parts List 16 5497609D Module Assy, Fxtr Instl and Drill 17 5597854_NOR 005 Fixture, Instl, and Drill Wldmt 18 5597854_NOR 006 Fixture, Inst, and Drill Wldmt 19 5597854_NOR 007(MVLS2-2449R1) Fixture, Inst, and Drill Wldmt 20 5597854_NOR 008 (MVLS2-3754) Fixture, Inst, and Drill Wldmt 21 5597854B PL Fixture, Inst, and Drill Wldmt 22 5597854B Fixture, Inst, and Drill Wldmt 23 5598168- Table, Plate Table, Plate 24 5598168_NOR 001 (VR11355) Table, Plate 25 5599023- Table, Plate Table, Plate 26 5599023nor001 Table, Plate 27 5599024- Table, Plate Table, Plate 28 5599024nor001 Table, Plate 29 5599096-Table,Plate Table, Plate 30 5599096_NOR 001 (VR11355) Table, Plate 31 5599106_NOR 001 (FVLS-1662R1) Pin, Pull 32 5599106_NOR 002 (MVLS2-3765) Pin, Pull 33 5599106_NOR_003_(NSWC2-1821) Pin, Pull 34 5599106rev- Pin, Pull

35 WS19143_SCN10_(MVLS2-

4337)_appr_05062022 Vertical Launching System

36 WS19143B Process Specification for Fusion Arc Welding of Steels

37 WS19143B_SCN1 Vertical Launching System 38 WS19143B_SCN2 Vertical Launching System 39 WS19143B_SCN3 Vertical Launching System 40 WS19143B_SCN4 Vertical Launching System 41 WS19143B_SCN5 Vertical Launching System 42 WS19143B_SCN6 Vertical Launching System 43 WS19143B_SCN 7 (MVLS2-3869) Launching System, Vertical MK41

MOD’s all 44 WS19143B_SCN 8 (NSWC2-1515) Vertical Launching System

45 WS19143B_SCN009_(NSWC2-

2063R3)_appr_04052021 Vertical Launching System

46 WS19185_SCN 003 Process Specification for Marking of Items

3 | 4

47 WS19185_SCN 004 Process Specification for Marking of Items

48 WS19185_SCN 005 Process Specification for Marking of Items

49 WS19185_SCN 006 Process Specification for Marking of Items

50 WS19185_SCN08_(NSWC2-

2062R6)_appr_10252021 Vertical Launching System

51 WS19185B- Process Specification for Marking Items

Process Specification for Marking Items

52 WS19185B_SCN 007 (MVLS2-3261) Vertical Launching System 53 WS19201D- Process Specification for

Application of Epoxy Polyamide Paint

Process Specification for Application of Epoxy Polyamide

Paint 54 WS19201D_SCN 1 (NSWC2-1193) Vertical Launching System

55 5496685_NOR 002 Target, Optical Alignment 56 5496685A Target, Open Alignment 57 5497842- Headless, Liner Specification Control Drawing 58 5497482_NOR 001 (VRN0491-01) Headless, Liner

WS19176A

Process Specification for Bonding with Adhesive Epoxy Two Part General Purpose

60 WS19177_SCN 2 (VRN0839-01) Material Specification for Epoxy Adhesive Kit

61 WS19177_SCN 3 (VR14557A01) Material Specification for Epoxy

62 WS19177_SCN 4 (MVLS2-1757R1) Material Specification for Epoxy

63 WS19177A Material Specification for Epoxy

64 WS20173rev Material Specification for Adhesive Epoxy Structural

65 WS20173_NOR 1 Material Specification For Adhesive Epoxy Structural

66 WS20173_NOR 2 Material Specification for Adhesive Epoxy Structural

67 WS20173_NOR 3 Material Specification for Adhesive Epoxy Structural

68 WS20173_NOR 4 Material Specification for Adhesive Epoxy Structural

69 WS20173_SCN 1 (NOR 5) Material Specification for Adhesive Epoxy Structural

70 WS20174A Process Spec for Bonding with Structural Epoxy Adhesive

4 | 4

WS20174A_SCN 1(MVLS2-815)

Application Requirements for Bonding with a Structural Epoxy

Adhesive

72 WS20174A_SCN 2 (FVLS2-1990)

WS20175

Material Specification for

Adhesive Primer Corrosion Exhibiting

74 WS20175 (NOR 001) Adhesive Primer, Corrosion Inhibiting

WS20175 (NOR 001)

Material Specification for Adhesive Primer, Corrosion

Inhibiting 76 WS20175 SCN1 (NOR 003) Adhesive Primer, Corrosion

Inhibiting

77 WS20175 SCN 3

78 WS20175 SCN 4

79 WS20175 SCN2 (NOR 004)

5 | 4

5. REQUIREMENTS

The Offeror shall manufacture and deliver ten (10) Drill Fixtures in accordance with the drawings provided as GFI. Four (4) Drill Fixtures will be required 6 months after contract award. Two (2) Drill Fixtures will be required each option year. The Government may choose to exercise the option early if required.

6 | 4

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

Four (4) Drill Fixture required 6 months after contract award.

Option to procure two (2) Drill Fixture required each year for three (3) years. The Government may choose to exercise the option early if required.

B. PLACE OF PERFORMANCE

N/A

C. SHIPPING ADDRESS

NSWC Corona Division Building 575 1999 Fourth Street Norco, CA 92860-5000