C9_SF30_N6426721R6003-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide a Notice of NIST SP 800-171 DoD Assessment Requirements; see Section C, and Section L. The response date is extended.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Feb-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6426721R6003

X 9B. DATED (SEE ITEM 11)

25-Jan-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Feb-2021

CODE

NAVAL SURFACE WARFARE CENTER CORONA DIV.

1999 FOURTH STREET BLDG 510

NORCO CA 92860

N64267 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6426721R6003

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 27-Feb-2021 09:00 AM to 02-Mar-2021 09:00 AM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

Measurement Science and Engineering Department VLS Graphite Ablative Block Kits

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division (MS20) requires 100 Graphite Ablative Block Kits for the Vertical Launching System (VLS).

2. BACKGROUND

Naval Sea System Command (NAVSEA) Integrated Weapons System (IWS) Code 3L has a requirement to procure 100 Graphite Ablative Block Kits. Each kit consists of four (4) each of drawing numbers 5224437- 1 and 6655747-1. These blocks will be installed in the VLS to protect other vital parts from the heat generated by a missile launch. These blocks are a critical and required part of the VLS.

3. SCOPE

This Statement of Work (SOW) defines the requirements for equipment that is part of the Mark 41 (MK

41) VLS. In order to meet this requirement, NAVSEA IWS 3L requires the equipment listed below in Section 5 of this SOW.

4. APPLICABLE DOCUMENTS

Please refer to the following documents: Designs 5224437-1 and Notice of Revisions (NORs), 6655747-1 and NORs, and Weapon Specification WS20172A Type III with NORs and Specification Change Notices.

Document Number Document Title NAVSEA Drawings 5224437-1 Ablative Block NAVSEA Drawings 6655747-1 Ablative Block WS20172A Type III Product Specification for Cast High Density Fiber Graphite Parts

5. REQUIREMENTS

The Offeror shall provide a quantity of 100 Graphite Ablative Block Kits. Table 1 is the list of items contained in each Graphite Ablative Block Kit. The Offeror must conform to Weapon Specification WS20172A Type III with NORs and Specification Change Notices.

Table I: List of items in one (1) Graphite Ablative Block Kit

KIT ITEM DRAWING DESCRIPTION QTY

1 5224437-1 ABLATIVE BLOCK 4 Blocks per Kit 2 6655747-1 ABLATIVE BLOCK 4 Blocks per Kit

Kit Total 8 Blocks per Kit

6. Notice of NIST SP 800-171 DoD Assessment Requirements

This solicitation and resulting contract contains Covered Defense Information (CDI). An unclassified information system that is owned, or operated by or for, a contractor and that processes, stores, or transmits CDI is subject to the requirements of NIST SP 800-171.

Contractors required to implement NIST SP 800-171, are required at time of award to have at least a Basic NIST SP 800-171 Assessment that is current (i.e., not more than 3 years old). See

Drawing No. Related Files (.pdf) Description 5224437_NOR_001 Notice of Revision 001

5224437_NOR 002

(NSWC2-1860)_appr_ 11052018

Notice of Revision 002

5224437A Ablative Block

6655747_NOR_001 Notice of Revision 001

6655747_NOR002

(NSWC2-

1860)_appr_11052018

Notice of Revision 002

6655747 Ablative Block

WS20172_NOR 002

(VR14810L01)

Notice of Revision 002

WS20172_NOR 003

(VR14852 01A)

Notice of Revisioin 003

WS20172_NOR 004

(FVLS-2114)

Notice of Revision 004

WS20172A

Product Specification For Cast High Density Fiber Graphite Parts

WS20172A_SCN (FVLS2

-2292)

Specification Change Notice (SCN)

WS20172A

Ablative Block (P/N: 6655747-1)

Product Specification for Cast High Density Fiber Graphite Parts

(WS20172A )

Ablative Block (P/N: 5224437-1)

5224437

6655747

Section L of this solicitation for instructions on how to conduct and submit the Basic NIST Assessment.

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

PROPOSAL INSTRUCTIONS

The Offeror shall submit a completed SF-33 along with the prices for all CLINs. Items are considered noncommercial items. Proposals shall be submitted to Francisco J. Armas at Francisco.Armas@navy.mil with a response date as indicted in Block 9 of the SF 33.

Proposal submission indicates acceptance of all terms and conditions set forth herein.

Proposal must be valid for 180 days.

Offeror shall indicate any teaming arrangements/subcontracting agreements.

PRICE PROPOSAL SUBMISSION

It is anticipated that cost/price data available from the Government or other secondary sources will be limited.

Therefore, in accordance with FAR 15.403-4 and DFARS 252.215-7010 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data--Basic submission is required. As a part of the data submission, the Offeror shall include appropriate data on the prices at which similar items have previously been sold. Additional examples of Data Other than Certified Cost or Pricing Data can be found at FAR 2.101.

Basic NIST SP 800-171 Assessment

If the Offeror does not have a current Basic NIST Assessment posted in SPRS, the Offeror may conduct and submit the Basic NIST Assessment to webptsmh@navy.mil. Vendors needing help posting Basic Assessments should follow the instructions at https://www.sprs.csd.disa.mil/pdf/NISTSP800-171QuickEntryGuide.pdf . Additional information can be found on the Supplier Performance Risk System (SPRS) website located at https://www.sprs.csd.disa.mil/, DFARS 252.204-7019, and DFARS 252.204-7020.

The Offeror is required to have submitted the Basic NIST Assessment to webptsmh@navy.mil prior to the closing date specified in Block 9 of the SF33. In accordance with DFARS 252.204-7019, in order to be considered for award the Offeror shall have a current Basic assessment in SPRS.

(End of Text)

(End of Summary of Changes)