Scalar RFI SOW.doc

Statement of Work

Microwave Scalar Network Analyzer

1.0 Introduction

The Naval Air Systems Command (NAVAIR) Metrology and Calibration (METCAL) Program has a requirement to procure Spanawave Microwave Scalar Network Analyzers (SNA), M/N 8003-S5554N. The SNAs measure the amplitude characteristics for Radio Frequency devices being calibrated. Examples of the SNA applications include the measurement of Voltage Standing Wave Ratio for low pass filters operating over frequency ranges from 20 MHz through 1 GHz and the return loss of directional couplers used in conjunction with radar test sets over the frequency range of 1 GHz through 6 GHz. This unit shall replace the legacy unit M/N 8003-S5554B manufactured by the previous OEM Giga-tronics. For each new M/N 8003-S5554N procured a legacy M/N 8003-S5554B will be turned into the vendor.

2.0 Background

These SNAs are used at intermediate level calibration laboratories. The NAVAIR METCAL program’s inventory is out of service due to outdated equipment. The repair of these legacy units is not considered a commercially viable option. Spanawave M/N 8003-S5554N is being procured as a replacement/upgrade. The upgrade includes an LCD display, which enhances more visibility for better readability and serviceability. The safety of the equipment will be greatly improved, due to removal of the CRT monitor and associated high voltage electronics. This upgrade also mitigates current obsolescence and availability concerns.

3.0 Scope

The scope of this effort is to procure up to 67 Spanawave Test Equipment Microwave SNA M/N 8003-S5554N.

4.0 Applicable Documents

N/A

5.0 Requirements

5.1 Contractor shall provide up to 67 Spanawave Scalar Network Analyzers.

5.2 Contractor shall provide Operator/Service Manual(s) (CDRL T001). Technical manuals describing how to operate the M/N 8003-S5554N shall have information on operator safety, operating procedures for the system and preventative maintenance. Service manuals shall contain information on safety for servicers of the M/N 8003-S5554N and instructions on repairing and maintaining components the OEM designates as user serviceable. Technical manual(s) for the operation and/or service of the M/N 8003-S5554N Microwave SNA shall be provided in accordance with CDRL T001.

5.3 Calibration Certification with Report and/or Certificate of Conformance Report (CDRL A001). A calibration certification and/or Certificate of conformance with calibration data shall be provided in accordance with CDRL A001.

5.4 The contractor shall provide an instrument calibration procedure for the M/N 8003-S5554N in accordance with CDRL A002.

5.5 All systems procured shall be serialized.

5.6 Warranty. The manufacturer shall provide the minimum commercial warranty for the calibration standard of at least one (1) calendar year from date of shipment.

5.7 Warranty Sticker. Each calibration standard shall have a sticker affixed to the outside of the unit enclosure.

5.8 Contractor shall provide M/N 8003-S5554N for each M/N 8003-S5554B turned in.

6.0 Government Furnished Property

N/A

7.0 Deliverables