Tab_6__Sole_Source-_Fluke_RPM4_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE/BRAND

HAVE NOT

Measurement Science 35

06/28/18

Fluke Electronics Corperation

MFR P/N (Description)

3072483 (RPM4 PRESSURE MONITOR)

3074011 (RPM4-BASE, BASE PRESSURE MONITOR)

3074238 (RPM4-HI-A7MP, HI RPT, 7 MPA ABSOLUTE GAS, PREM)

3074791 (RPM4-LO-A700KP, LO RPT, 700 KPA ABSOLUTE GAS, PREM)

3074985 (RPM4-U0M-US NOMINAL RANGES IN US UNITS OF MEASURE)

3393662 (MIL-STD-130UID, M130 LABEL WITH UID)

JUSTIFICATION FOR SOLE SOURCE/BRAND NAME

BRAND NAME

SOLE SOURCE

FLUKE CALIBRATION INSIDE SALES DOD/GOVERNMENT

FLUKE CALIBRATION INSIDE SALES DOD/GOVERNMENT

6920 Seaway Blvd M/S 123 Everett, WA 98203

N/A

JUSTIFICATION FOR SOLE SOURCE/BRAND NAME

Certification:

GENERAL INFORMATION

The following are not appropriate causes to warrant sole source/brand name justification:

these items are sold on our exclusive GSA contract and not through any distribution channels

An Inter-Laboratory Comparison Program (ILCP) requires 'artifacts' capable of 1: Maintaining repeatability (stability) at least equal to the accuracy of the calibrations standards utilized by the ILCP participants.

2: Able to maintain MFR stated accuracy through repeated shipments during Round Robin Proficiency Testing (RRPT) events.

RUSKA - To match ILCP participant capability, a RUSKA pressure measurement system would be prohibitive to lab space on board ship. The size of this unit is roughly 8-10 separate components that make up this entire unit. This unit will also require a separate contractor to build it in place and calibrate after assembly this material being not cost effective to ship due to the calibration procedures to recalibrate after installation. The approximate cost to build would be in excess of $50k.

06/28/18