N64267-17-T-0036_RFQ.pdf

N64267-17-T-0036

Section A - Solicitation/Contract Form

COMBINED SYNOPSIS/SOLICITATION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Each UHF MT-4E Transmitter

FFP

UHF MT-4E Transmitter (UHF Transmitter, 380-406MHz,12.5/25KHz channels, N Connectors) Shall include: P25 digital operation enabled APP-FIRM02-W-XX

Brand Name or Equal FOB: Destination

MFR PART NR: UT-4E380-00-800

NET AMT

0002 12 Each UHF MT-4E Receiver

FFP

UHF MT-4E Receiver ( UHF Receiver, 380-406MHz,12.5/25KHz channels, N Connectors) Shall include: P25 digital operation enabled APP-FIRM01-W-XX

Brand Name or Equal

MFR PART NR: UR-4E380-00-000

0003 6 Each Radio Chassis

FFP

Radio Chassis, Holds: 2 RX Modules, 2 TX (Exciter) Modules, 1 Control Card and 1 System Regulator

Brand Name or Equal

MFR PART NR: SR-39-1

0004 8 Each Interface Controller

FFP

Interface Controller, shall include P25 digital operation enabled. APP-UIC-4-02

Brand Name or Equal

MFR PART NR: UIC-4-00

0005 6 Each System Voltage Regulator

FFP

System Voltage Regulator, audio monitoring

Brand Name or Equal

MFR PART NR: SM-3-H0-014-00

0006 6 Each Auxiliary Connector and Terminal Block

FFP

Auxiliary Connector and Terminal Block (AUX CTRL EXTENDER + TERM

BLOCK)

Brand Name or Equal

MFR PART NR: A-PNL-AUX96-3

0007 12 Each Modular Amplifier

FFP

Modular Amplifier for MT-4 radio system (AMP/380-406MHz,5-10W/100W, 5PAC)

Brand Name or Equal

MFR PART NR: AMP-380-100-D1M

0008 2 Each AMP Chassis

FFP

AMP Chassis, 19' rack mountable, 5 amp capacity

Brand Name or Equal

MFR PART NR: A-RACK19-AMP-02

0009 18 Each

CABLE/RF

FFP

CABLE/RF, RG223U

Brand Name or Equal

MFR PART NR: CBL223

Section C - Descriptions and Specifications

SALES TAX EXEMPTION

The contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

SOW

1.INTRODUCTION

The Naval Surface Warfare Center Corona Division, (NSWC CORDIV), Range Systems Department, Codes RS32 and RS10 require telecommunications operating materials and supplies in support of Test and Training Range systems. Items are of electronic class and radio frequency type required to design, build, deliver and maintain telecommunications systems.

2. BACKGROUND

The Khurais Range project represents a joint effort by the U.S. Air Force (USAF) and the Royal Saudi Air Force (RSAF) to provide the facilities necessary to support the new Khurais Air-to-Ground (ATG) Electronic Warfare Range.

3. SCOPE

NSWC Corona Division, Range Systems Engineering Department, Codes RS32 and RS10, have a requirement to provide a ground-to-ground radio communications system, using APCO-25 (P25) radios, at Khurais Sultan Electronic Warfare ranges. Instrumentation is required for two sites. This communications system is part of the Weapons Impact Scoring Set (WISS) infrastructure, audio transport and audio capability for the Joint Thread Emitters (JTE). The WISS system provides pilot training for delivery of air-to-ground ordnance. The ground to ground communication is used for range safety during mission support. In order to meet these requirements, RS32 and RS10 require the radios listed on this SOW.

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

CLIN QTY UI Manufacturer Manufacturer P/N Description

001 12 EA Codan Radio Communications UT-4E380-00-800

UHF MT-4E Transmitter (UHF Transmitter, 380- 406MHz,12.5/25KHz channels, N Connectors) Shall include: P25 digital operation enabled APP-FIRM02-

W-XX

002 12 EA Codan Radio Communications UR-4E380-00-000

UHF MT-4E Receiver ( UHF Receiver, 380- 406MHz,12.5/25KHz channels, N Connectors) Shall include: P25 digital operation enabled APP-FIRM01-

W-XX

CLIN QTY UI Manufacturer Manufacturer P/N Description

003 6 EA Codan Radio Communications SR-39-1

Radio Chassis, Holds: 2 RX Modules, 2 TX (Exciter) Modules, 1 Control Card and 1 System Regulator

004 8 EA Codan Radio Communications UIC-4-00 Interface Controller, shall include P25 digital operation enabled.

APP-UIC-4-02

005 6 EA Codan Radio Communications SM-3-H0-014-00 System Voltage Regulator, audio monitoring

006 6 EA Codan Radio Communications A-PNL-AUX96-3 Auxiliary Connector and Terminal Block (AUX CTRL EXTENDER

+ TERM BLOCK)

007 12 EA Codan Radio Communications AMP-380-100-D1M Modular Amplifier for MT-4 radio system (AMP/380-406MHz,5-

10W/100W, 5PAC)

008 2 EA Codan Radio Communications

A-RACK19-AMP-

AMP Chassis, 19' rack mountable, 5 amp capacity

009 18 EA Codan Radio Communications CBL223 CABLE/RF, RG223U

Requesting brand name or equivalent – Salient Characteristics provided Equipment must be new from Manufacturer – Secondary Market or Grey-ware equipment is not acceptable.

Shipping shall be included in the total cost

Salient Characteristics

The following items work as a system, shall operate in UHF Band (380 to 406 MHz) and shall allow P25 digital operation.

RF Transmit power: 100 Watts, FM Receiver Sensitivity: -116 dBm (.350 μV) for 12 dB SINAD and 5% BER, maximum The radio system shall interface with Bosch / Telex C-Soft (P25 version supporting Digital Fixed Station

Interface) The communications rooms have limited rack space; therefore, the space allowed for 5 channels per site shall not exceed 15 rack units (26.25 in)

Additional characteristics:

CLIN 001: UHF MT-4E Transmitter (UHF Transmitter, 380-406MHz,12.5/25KHz channels, N Connectors, with P25 digital operation enabled) Performance:

Operating frequency: The radio shall operate in UHF bands (380 to 406 MHz) The transmitter shall be programmable, with at least 16 channels Shall allow P25 digital operation (Shall include firmware upgrade equivalent to P/N: APP-FIRM02-W-XX

FIRMWARE, MT4E TX, DIGITAL UPG)

Modulation: FM, capable of analog operation in 12.5 KHz (narrowband) and 25 KHz (wideband) Frequency Switching Range: Full Band; ± 0.5 MHz for VSWR alarm RF Output Power: 0.5 to 6.0 Watts adjustable Duty Cycle: 100% (-30°C to +60°C) Conducted Spurious emissions: -70 dBc (-31 dBm @ 6W), maximum

Adjacent Channel Power Ratio (Undesired Emissions): shall not exceed -60 dBc for Narrowband Analog / ≤ -70 dBc for Wideband Analog, ≤ -67 dBc for Digital

Intermodulation Attenuation: 40 dB, minimum FM Hum & Noise Ratio: 40 dB Narrowband, 46 dB Wideband, minimum Carrier Frequency Stability: ± 0.5 ppm (-30°C to +60°C) Audio Distortion: (60% of maximum deviation) ≤ 3.0% (-30°C to +60°C) VSWR Protection: ≤ 20:1 VSWR (All Phase Angles)

Environmental/ Physical:

Operating Temperature: -30°C to +60°C

Electrical:

Standby Current: ≤ 50 mA / ≤ 80 mA with encryption module Transmit Current: 2.80 A, maximum

CLIN 002: UHF MT-4E Receiver (UHF Receiver, 380-406MHz,12.5/25KHz channels, N Connectors, with P25 digital operation enabled) The receiver shall meet the following requirements:

Performance:

Operating frequency: The radio shall operate in UHF bands (380 to 406 MHz) The receiver shall be programmable, with at least 16 channels Shall allow P25 digital operation (Shall include firmware upgrade equivalent to P/N: APP-FIRM01-W-XX

FIRMWARE, MT4E RX, DIGITAL UPG.)

Modulation: FM, capable of analog operation in 12.5 KHz (narrowband) and 25 KHz (wideband) Receiver Sensitivity: -116 dBm (.350 μV) for 12 dB SINAD and 5% BER, maximum Adjacent Channel Rejection: ≥ 40 dB; NB Analog / ≥ 70 dB; WB Analog / ≥ 60 dB; Digital Conducted Spurious Output Power (Analog): -57 dBm, maximum Intermodulation Rejection: ≥ 70 dB Analog / ≥ 70 dB Digital Hum & Noise Ratio: 34 dB Narrowband / 40 dB Wideband, minimum L.O. Frequency Stability: ± 0.5 ppm (-30°C to +60°C) Audio Distortion (Analog and Digital): 2.0 % (25°C); 3.0 % (-30°C to +60°C), maximum Audio Output Level (600 Ohm Balanced): +3.0 dBm, maximum

Environmental/ Physical:

Operating Temperature: -30°C to +60°C

Electrical:

Supply Current: ≤ 270 mA / ≤ 300 mA with encryption module

CLIN 003: Interface Controller with P25 digital operation enabled

Shall provide IP-based Ethernet network connection between the receivers/transmitters and other Land Mobile Radio subsystems.

Shall include P25 digital operation enabled (Shall include firmware upgrade equivalent to P/N: APP-UIC-

4-02 FIRMWARE/UIC-4, FIXED STN I/F)

Shall support TIA P25 Digital Fixed Station Interface (DFSI) standard, as stated in P25 standard document TIA-102.BAHA. Shall allow end-to-end digital link between consoles and subscriber units, and support analog-mode calls as well as P25 calls.

The interface controller shall provide the following:

o Channel control of receiver and transmitter modules, minimum 16 channels o Detect and report the mode (analog or P25) of an inbound call on the receiver o Control receiver squelch selection o Monitor and report the states of the transmitter’s alarm o Clear the encryption keys from all encryption-equipped radio modules o Control and monitor eight digital general purpose input and output (GPIO) signals from the console. The four inputs are 10 mA max., 0 to +1 Vdc low / +2 to +13.8 Vdc high. The four outputs are 20 mA max., 0 Vdc low / +5 Vdc high.

o Control and monitor eight analog GPIOs for use with external equipment. The four inputs are 0 to +3.3 Vdc, 3 kΩ impedance. The four outputs are 20 mA max., 0 to +3.3 Vdc.

o Monitor and report power supply voltage levels Current draw: shall not exceed 128 mA.

The DFSI shall support:

o Audio Reception and Transmission using IMBE™ (P25) or u-law PCM (analog) o Passes all received P25 data to the console (NAC, TGID, MFID, ALGID, KID, etc.).

o Full end-to-end digital encryption if supported by the console and subscribers.

o Outbound audio buffering when transmitting P25 mode calls, with a programmable buffer length

(200 ms max.)

Shall interface with Bosch / Telex C-Soft (P25 version)

CLIN 004: System Voltage Regulator

Shall provide voltage regulation, system metering and audio monitoring for MT-4 radios system (receiver and transmitter)

Shall provide:

o High current +9.5 Vdc voltage regulator with an anti-latchup hysteresis circuit o Audio amplifier and loudspeaker with volume control o Shall provide test points for supply voltage, regulated voltage and/or audio output

CLIN 005: Radio Chassis for MT-4 radio systems Enclosure for receiver, transmitter, interface control car and system regulator

The enclosure shall be able to hold two transmitters modules, two receiver modules, one interface card and one system regulator, and shall allow interconnectivity of these items.

Dimensions: shall not exceed 19″ W x 15″ D x 7″ H Power Input: +10 to +17 Vdc; +13.8 Vdc nominal The unit shall include reverse voltage protection and over voltage protection.

CLIN 006: Auxiliary Connector and Terminal Block (AUX CTRL EXTENDER + TERM BLOCK)

Shall allow access to all signals on the motherboard auxiliary connector in the radio system chassis Allows interfacing of radio signals such as Transmit, Receive, PTT, Auxiliary COR and audio connections to external devices

CLIN 007: Modular Amplifier for MT-4 radio system (AMP/380-406MHz, 5-10W/100W, 5PAC)

Shall support MT-4 radios Shall support 380 to 406 MHz frequency band Operating Voltage: +13.8 VDC Current Draw: 26 Amperes (Max) Duty Cycle: 100% RF Output power: 100 Watts RF Input Power Range: 5.0 to 10.0 Watts Spurious & Harmonics: Meets FCC Requirements. -70 dBc @ 100 Watts RF output (UHF), maximum Load VSWR Tolerance: VSWR Protected above 2.5:1 Input / Output Impedance: 50Ω Input / Output Connector: Type 'N' Female Tx Current Drain @ 100 W (UHF): 21 A (typical) / 25 A (maximum) Shall provide heat dissipation capability (fan and/or heatsink) Operating Temp. Range: -300 C to +600 C Storage & Transport: -400 C to +700 C

Humidity: 80% at +400 C (non-condensing)

CLIN 008: AMP Chassis, 19' rack mountable, 5- amplifier capacity

Shall allow installation of 5 amplifiers modules in the chassis Shall be rack mountable, in 19” wide racks Dimensions shall not exceed:

o Weight: 12 lbs o Depth: 20.0 inches o Vertical Rack Space: 7.0 inches (4 RU)

CLIN 009: CABLE/RF, RG223U

Allows connectivity between radio system (Transmitters and Receivers) and amplifier Length: shall not exceed 5 FT Connectors: N-Type, male Flexible cable to allow bending around other devices installed in rack.

6. ACRONYM LIST

ACRONYM DENOTATION

JTE Joint Thread Emitter KSA Kingdom of Saudi Arabia ROC Range Control Center RSAF Royal Saudi Air Force USAF United States Air Force WISS Weapons Impact Scoring Set

CLAUSES INCORPORATED BY FULL TEXT

HQ C-2-0024 EXTENSION OF COMMERCIAL WARRANTY (NAVSE) (NOV 1996)

The Contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale, provided that such warranty is available at no additional cost to the Government. The Contractor shall provide a copy of the standard commercial warranty with the item. The standard commercial warranty period shall begin upon the final acceptance of the applicable material or software. Acceptance of the standard commercial warranty does not waive the Government's rights under the "Inspection" clause, nor does it limit the Government's rights with regard to other terms and conditions of the contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty.

(End of Text)

HQ C-2-0063 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL

CONTRACT FILES (NAVSEA) (APR 2004)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as “protected information”. File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors are free to enter into separate non-disclosure agreements with the file room contractor. (Please contact Director, E Business Division for contractor specifics.) However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

Section D - Packaging and Marking

HQ D-1-0006 WARRANTY NOTIFICATION FOR ITEM(S) 0001-0009 - (NAVSEA) (NOV 1996)

The Contractor shall apply a permanent warranty notification stamping or marking on each warranted deliverable end item and its container. The notification shall be placed in close proximity to other required stamping or markings so as to be easily readable by personnel. The warranty notification shall read:

THIS ITEM WARRANTED UNDER CONTRACT

TBD TO CONFORM TO DESIGN,

MANUFACTURING, AND PERFORMANCE REQUIREMENTS

AND BE FREE FROM DEFECTS IN MATERIAL AND

WORKMANSHIP FOR TBD FROM

DATE OF ACCEPTANCE. IF ITEM IS DEFECTIVE

NOTIFY TBD AND PCO.

HQ D-1-0002 PACKAGING LANGUAGE (W/O MILITARY SPECIFICATIONS)

Item(s) 0001-0009 The supplies furnished hereunder shall be packaged in accordance with best commercial practice.

HQ D-2-0003 ADDITIONAL MARKING REQUIREMENTS FOR FMS ITEMS

(NAVSEA) (SEP 1992)

(a) The following identifying marks shall appear on the outside of each box, parcel and/or crate and all shipping papers included in each shipment:

NAVY

FMS CASE SR-D-SAI

REQUISITION NO. TBD

ITEM DESCRIPTION Radios

If a consolidated shipment of several items in one container is forwarded, add to the above information "CONSOLIDATED SHIPMENT, CONTAINS ITEMS".

(b) The inscription "UNITED STATES OF AMERICA" shall be affixed in a suitable size indelible stencil, label or printed form on all external shipping containers or the exterior surface of uncrated items.

(c) All invoices, correspondence, reports and other documents shall be identified with the appropriate FMS case designator, requisition number(s), and item description(s).

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

HQ E-1-0003 INSPECTION AND ACCEPTANCE LANGUAGE FOR F.O.B. DESTINATION

DELIVERIES

Item(s) 0001-0009 - Inspection and acceptance shall be made at destination by a representative of the Government.

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC

0001 30 dys. ADC 12 NAVAL SURFACE WARFARE CENTER

CORONA DIV.

HENRY VARELA

1999 FOURTH STREET BUILDING 204

NORCO CA 92860

951-393-5089

N64267

0002 30 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0003 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0004 30 dys. ADC 8 (SAME AS PREVIOUS LOCATION)

0005 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0006 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0007 30 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0008 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0009 30 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

52.247-34 F.O.B. Destination NOV 1991

HQ F-2-0004 F.O.B. DESTINATION (NAVSEA) (APR 2015)

All supplies hereunder shall be delivered with all transportation charges prepaid, in accordance with the clause hereof entitled "F.O.B. DESTINATION" (FAR 52.247-34) in accordance with the delivery instructions specified herein.

The Contractor shall not ship directly to a military air or water port terminal without authorization by the cognizant Contract Administration Office.

Except when the Material Inspection and Receiving Report (MIRR) (DD 250) is used as an invoice, the Contractor shall enter unit prices on all MIRR copies. Contract line items shall be priced using actual prices, or if not available, estimated prices. When the price is estimated, an "E" shall be entered after the price.

All data to be furnished under this contract shall be delivered prepaid to destination(s) at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423.

Section G - Contract Administration Data

252.204-0001 Line Item Specific: Single Funding SEP 2009 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoicing and Receiving Report Combo

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Inspection Location: Destination Acceptance Location: Destination

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Contract Number TBD Cage Code TBD Pay Official DoDAAC N62827 Issue By DoDAAC N64267 Admin DoDAAC N/A Inspect By DoDAAC N64267 Ship To Code N64267 Ship From Code N/A Mark For Code N/A Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

CRNA_WAWF_COMPTROL@NAVY.MIL

TBD@navy.mil Tashell.richmond@navy.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

NAVSEA HQ WAWF Helpdesk: WAWFHQ@navy.mil; or Scott Wobken at 951-393-5135 or scott.wobken@navy.mil For vendor pay issues contact Dolores Gonzalez at 951-393-4459 or dolores.gonzalez@navy.mil

(End of clause)

HQ G-2-0004 PURCHASING OFFICE REPRESENTATIVE

PURCHASING OFFICE ATTN: Tashell Richmond

REPRESENTATIVE: NAVAL SURFACE WARFARE CENTER

1999 FOURTH STREET BUILDING 523

NORCO CA 92860

Telephone No. 951-393-5259 Fax No. 951-393-4013

PRODUCT DATA REPORTING AND

EVALUATION PROGRAM (PDREP)

DEPARTMENT COORDINATOR

REPRESENTATIVE

Email Address:tashell.richmond@navy.mil

Contracting Officer

ATTN: MARCELLA WEBBER

NAVAL SURFACE WARFARE CENTER

1999 FOURTH STREET BUILDING 523

NORCO CA 92860

Telephone No. 951-393-4454 FAX No. 951-393-4013 Email Address: marcella.webber@navy.mil

ATTN: TBD

NAVAL SURFACE WARFARE CENTER

P.O. BOX 5000

CORONA CA 92878-5000

Telephone No. 951-393-XXXX Email: TBD@navy.mil

ATTN: Tashell Richmond

(End of Text) **NOTE: Subject Matter Expert (SME) shall be used in lieu of Contracting Officer’s Representative

(COR)**

HQ G-2-0009 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (APR 2015)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the technical instruction (TI), sub line item number (SLIN), or contract line item number (CLIN) level, rather than on a total contract/TO basis, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by TI, SLIN, or CLIN level. For other than firm fixed price subcontractors, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer (CO) and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the CO and COR; or other method as agreed to by the CO.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and CO on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and CO email notification as required herein.

Section H - Special Contract Requirements

5252.202-9101 ADDITIONAL DEFINITIONS (MAY 1993)

As used throughout this contract, the following terms shall have the meanings set forth below:

(a) DEPARTMENT - means the Department of the Navy.

(b) REFERENCES TO THE FEDERAL ACQUISITION REGULATION (FAR) - All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(c) REFERENCES TO ARMED SERVICES PROCUREMENT REGULATION OR DEFENSE ACQUISITION REGULATION - All references in this document to either the Armed Services Procurement Regulation (ASPR) or the Defense Acquisition Regulation (DAR) shall be deemed to be references to the appropriate sections of the

FAR/DFARS.

(d) NATIONAL STOCK NUMBERS - Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

(1) National Item Identification Number (NIIN). The number assigned to each approved Item Identification under the Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit non-significant number.

(2) National Stock Number (NSN). The National Stock Number (NSN) for an item of supply consists of the applicable four position Federal Supply Class (FSC) plus the applicable nine position NIIN assigned to the item of supply.

Section I - Contract Clauses

52.202-1 Definitions NOV 2013 52.203-3 Gratuities APR 1984 52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

APR 2014

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-13 System for Award Management Maintenance OCT 2016 52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015 52.229-4 Federal, State, And Local Taxes (State and Local

Adjustments)

FEB 2013

52.232-1 Payments APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7997 (Dev) Prohibition on Contracting with Entities that Require Certain

Internal Confidentiality Agreements (Deviation 2016-O0003)

OCT 2015

252.203-7999 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. (DEVIATION 2015- O0010)

FEB 2015

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.225-7001 Buy American And Balance Of Payments Program-- Basic

(Aug 2016)

AUG 2016

252.225-7012 Preference For Certain Domestic Commodities AUG 2016 252.225-7028 Exclusionary Policies And Practices Of Foreign Government APR 2003 252.225-7048 Export-Controlled Items JUN 2013 252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.247-7023 Transportation of Supplies by Sea APR 2014

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEC 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

X (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Nov 2016) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Nov 2016) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

X (19) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

X (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

X (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).

Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.

____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016).

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).

____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693).

____ (47) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____(48) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (49) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (50) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (51) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (52) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (53) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

____ (54) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (55) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X (56) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C.

3332).

____ (57) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (58) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (59) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

_____ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(v) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xi) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xvi) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).

Note to paragraph (e)(1)(xvi): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.

(xvii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)).

(xviii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xix) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xx) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/vffara.htm

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely…