revised_SOW_(CPEN_130G_Doors).pdf

Rev 3/31/16

Statement of Work Template R130G Breaching Doors

1. INTRODUCTION

The Naval Surface Warfare Center Corona Division, (NSWC CORDIV), Range Systems Department, Code RS10 requires telecommunications infrastructure operating materials and supplies in support of Marine Corps Base Camp Pendleton.

2. BACKGROUND

Program Manager for Training Systems (PM TRASYS) has a requirement to provide reusable doors for force-entry, shotgun and explosive breaching training at Range 130G, at Marine Corps Base (MCB) Camp Pendleton.

3. SCOPE

RS10 has been tasked to purchase and install several types of breaching doors in Range 130G.

In order to meet these requirements, RS10 requires the breaching doors listed in this SOW.

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

CLIN Qty U/I Manufacturer Manufacturer P/N Description

001 1 EA

Breaching Technologies Inc.

EDSA

BTI Saloon Explosive Breaching Door

002 1 EA

Breaching Technologies Inc.

ED

BTI Lock Explosive Breaching Door

003 1 EA

Breaching Technologies Inc.

EROD

BTI Reverse Opening Lock Explosive Breaching Door

004 2 EA

Breaching Technologies Inc.

SDH

BTI Shotgun Hinge Breaching Door

005 1 EA

Breaching Technologies Inc.

RDD

BTI Dual Swing Ram Breaching Door

006 1 EA

Breaching Technologies Inc.

PDD

BTI Dual Swing Pry Breaching Door

007 7 EA

Breaching Technologies Inc.

LK BTI Free Standing Leg Kit

008 2 EA

Breaching Technologies Inc.

BBD

BTI Burglar Bar Breaching Door

009 2 EA

Breaching Technologies Inc.

LKB

BTI Free Standing /Portable Leg Kit for Burglar Bar Door

Equipment must be new from Manufacturer – Secondary Market or Grey-ware equipment is not acceptable.

Shipping shall be included in the total cost

Salient Characteristics

CLIN 001 - Saloon Explosive Breaching Door

Dimensions:

Width: shall not exceed 8.4 FT Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit It shall open in the middle Shall allow the placement of explosive charges in the middle of the door

CLIN 002 - Lock Explosive Breaching Door

Dimensions:

Width: shall not exceed 40 in Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit Shall include a reinforced lock plate

Performance:

Operational weight pushing charges: 250 grains RDX (Research Department Explosive, Cyclonite) minimum.

Allows placement of explosive charges on the lock plate

CLIN 003 - Reverse Opening Lock Explosive Breaching Door

Width: shall not exceed 40 in Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit Shall include a reinforced lock plate Shall open in the reverse manner – on the left side

Performance:

Operational weight pushing charges: 250 grains RDX (Research Department Explosive, Cyclonite) minimum.

Allows placement of explosive charges on the lock plate

CLIN 004 - Shotgun Hinge Breaching Door

Dimensions:

Width: shall not exceed 40 in Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit Shall include:

o One Door knob o Two Dead bolts o Three Hinges

Performance:

Shall be reusable; shall support 1500 breaches

CLIN 005 - Dual Swing Ram Breaching Door

Width: shall not exceed 43 in Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit Shall provide capability of breaching the door from the inside or outside

CLIN 006 - Dual Swing Pry Breaching Door

Width: shall not exceed 43 in Height: shall not exceed 7 FT

Installation:

Shall be installed into a structure or with a freestanding kit Shall provide capability of breaching the door from the inside or outside

CLIN 007 - Free Standing Leg Kit

Width: shall not exceed 6 FT Height: shall not exceed 6 FT

Installation:

Shall be used with either door types listed on CLINS 1-6 in this SOW. It shall allow any of the requested doors to become portable Shall allow door to be placed and anchored Assembly of the door kit shall be completed with no more than two-people team

CLIN 008 - Burglar Bar Breaching Door

Dimensions:

Width: shall not exceed 53 in

Installation:

Shall simulate bending the door and pulling the mounting hardware from the structure in order to achieve a successful breach Shall be installed into a structure or with a freestanding kit Shall include light to heavy burglar bar installation

CLIN 009 - Free Standing /Portable Leg Kit for Burglar Bar Door

Width: shall not exceed 3 FT Height: shall not exceed 81 in

Installation:

Shall be used with the Burglar Bar Breaching Door. It shall allow the requested door to become portable Shall allow door to be placed and anchored Assembly of the door kit shall be completed with no more than two-people team

6. GOVERNMENT FURNISHED PROPERTY

N/A

7. DELIVERABLES

N/A

8. ACRONYM LIST

N/A

THIS PAGE CONTAINS NECESSARY INFORMATION FOR THE PROCUREMENT ACTION

THAT IS PLACED IN OTHER SECTIONS OF THE CONTRACT

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

The required delivery date for the material required is Sept 20, 2016.

B. PLACE OF PERFORMANCE

N/A

C. SHIPPING ADDRESS

Naval Surface Warfare Center, Corona Division 1999 Fourth St Norco, CA 92860-1915

D. INSPECTION AND ACCEPTANCE

The inspection and acceptance will be conducted by RS10 engineers.

E. TECHNICAL POINT OF CONTACT