2-M.C.- FINAL SOW_REVDMPP013124.docx
DOCX document 24 KB Posted
- Attached to
- 24Q0004 Data Loggers Federal contract opportunity
- Solicitation number
- N6339424Q0004
About this file
This statement of work outlines calibration and repair services for data loggers used to monitor environmental conditions of missile components during transportation and storage. The Navy seeks these services from the manufacturer, LANSMONT Corporation, to ensure safety and integrity for the Missile Defense Agency program. The scope of work includes verification of functions, quality, accuracy, and calibration of sensors for temperature, humidity, pressure and other readings through accredited ISO/IEC 17025:2005 standards. Services will occur at locations in Virginia, Hawaii, Spain and Japan as needed and include battery replacement when applicable. The related solicitation from the Naval Sea Systems Command seeks these data logger services under opportunity number N6339424Q0004.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| E50-0003_REDACTED JA_01242024.pdf | ||
| 24Q0004_FINAL COMB SOLSYN_Data Loggers_02082024.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
DATE: 11 DEC 2023
1. BACKGROUND/INTRODUCTION
NSWC PHD is the designated In-Service Engineering Agent and the data loggers supports the Standard Missile All-Up-Rounds during transportation and storage to monitor the environmental conditions. This is a requirement by Program Executive Office Missile Defense Agency to ensure the safety and integrity of the mission.
2. OBJECTIVE
The objective of this contract is to procure calibration services from the manufacturer, LANSMONT and procure the repair of the data logger if needed.
3. SCOPE OF WORK
Scope of work under this contract includes the following
Calibration: Contractor will verify the proper function, quality and measurement accuracy. Calibration services will be accredited to ISO/IEC 17025:2005 standards. All calibration standards and test equipment will be traceable to the National Institute of Standards and Technology.
Below is a sample of the Calibration services that are expected, along with calibration documents from LANSMONT that will certify that our instruments meet our requirements.
• Check battery current draw
• Check all on-board memory
• Check functionality of internal and external inputs
• Check functionality of external triggers
• Calibrate signal conditioners
• Back-to-back comparison calibration for shock & vibration input
• System temperature response verification
• Check system frequency response
• Calibrate temperature, humidity, and atmospheric pressure sensors
• Verify accurate and stable signal conditioner gains
• Install new main and backup batteries (if appropriate)
• Install tamper seals and cal labels
Repair: Contractor will evaluate our instruments to ensure that it is operating as designed. If the instrument is found to be functioning correctly and no repair is needed, the Evaluation & Repair fee will be waived. If repairs are required, LANSMONT CORP. will automatically proceed to complete the repair provided doing so will not exceed this Evaluation & Repair fee. If the cost of repairs will exceed this fee, then LANSMONT CORP. will issue an additional quotation for the repair and proceed upon approval from the customer.
4. LANGUAGE OF WORK
Work will be performed and delivered in English.
5. LOCATION OF WORK
All of the work will be performed at Yorktown, VA; Pearl Harbor HI; Rota, Spain; and Yokosuka Japan.
File details come from the government source that posted it. Updated .