Corosion_SOW.docx

STATEMENT OF WORK

For GWSRP Support

SCOPE

Naval Surface Warfare Center, Port Hueneme Division acts as the In-Service-Engineering-Agent (ISEA) for the MK 46 Optical Sight System (OSS) and the MK 20 Electro-Optical Sensor System (EOSS) deployed on surface ships in the United States Naval and Coast Guard Fleets, as well as other Foreign Military Sales (FMS) countries.

As the ISEA, we are responsible for the oversight of the acquisition, repair, refurbishment and/or overhaul for components and sub-components of both systems to ensure a safe, effective and affordable capability is provided. The Gun Weapon System Replacement Program (GWSRP) has been established to support the repair/refurbishment requirements of the Program. The requirements established under this SOW are in direct support of GWSRP.

REFERENCES

NAVSEA TRS 1.1.0 - MK 15 DIS / MK 16 TIS ASSEMBLY PAINT PROCEDURE

NAVSEA TRS 1.2.0 - DIRECTOR MK 85 MOD 0/1 ASSEMBLY PAINT PROCEDURE

NAVSEA DRAWING 7498087 - PCMS Application for MK 85 EOD, MK 15 DIS, and MK 16 TIS.

http://www.nstcenter.com Website for NAVSEA approved Paint and Vendors ACD05T1-05 - PCMS Certification Standards

REQUIREMENTS

The contractor shall provide all services and materials required to perform the following:

Strip, corrosion proof, and paint quanity QTY SIX (6) MK 15 Daylight Imaging Sensor (DIS) in accordance with (IAW) Technical Repair Standard (TRS) 1.1.0

Strip, corrosion proof, and paint QTY SIX (6) MK 16 Thermal Imaging Sensors (TIS) IAW TRS 1.1.0.

Overhaul QTY SIX (6) MK 85 Electro Optic Director (EOD) IAW TRS 1.2.0.

Rethread QTY SIX (6) Elevation Shafts, QTY SIX (6) Azimuth Shafts and manufacture QTY SIX (6) each of the following retaining rings IAW the listed drawing:

Manufacture six (6) each of the following retaining rings IAW the listed drawing:

Create a paint record (containing thickness and environmental readings) for each overhauled unit.

If any equipment contains Passive Countermeasure (PCMS) material, remove and dispose of PCMS material in accordance with PCMS Access, Material Control, and Disposal Manual ACD 05T1-05. Removal/installation of PCMS material shall be performed by only qualified personnel holding approved NAVSEA PCMS certification. Installation of PCMS shall be IAW NAVSEA drawing 7498087. All excess material shall be returned to the Government sponsor upon completion of PCMS installation.

Deviations to any specifications require approval from the Government POC identified below before implementation.

PLACE OF PERFORMANCE

Work shall be performed in San Diego, CA.

PERIOD OF PERFORMANCE/DELIVERY SCHEDULE

All work shall be completed no later than 180 days ARO.

SHIPPING

Contractor shall pick up units from San Diego Naval Station Bldg 3339 Rm 1-23 and deliver the units back to San Diego Naval Station Bldg 3339 Rm 1-23 upon completion.

INSPECTION AND ACCEPTANCE

Inspection and acceptance of all equipment shall be performed by the government Point of Contact (POC) identified below at destination.

GOVERNMENT FURNISHED INFORMATION (GFI)/MATERIAL (GFM)/EQUIPMENT (GFE)

NAVSEA TRS 1.1.0 - MK 15 DIS / MK 16 TIS ASSEMBLY PAINT PROCEDURE

NAVSEA TRS 1.2.0 - DIRECTOR MK 85 MOD 0/1 ASSEMBLY PAINT PROCEDURE

PCMS Tiles (3R 7338390-4 and 18 7338388 no paint)

TECHNICAL POINT OF CONTACT

9.1 Technical Point of Contact is Richard Pietrantoni, NSWC PHD Code L45. Telephone: (619) 556-5510; Cell: (619) 241-9708; and E-mail: richard.pietrantoni@navy.mil.