N6328519T0520_RFICrimSupplies.docx

Request for Information NCIS Office of Forensic Support The Naval Criminal Investigative Service (NCIS) is issuing a sources sought synopsis as a means of conducting market research to obtain information on a vendor or multiple vendors to provide Crim Supplies to NCIS’ Office of Forensic Support. The result of this market research will contribute in the intent of establishing a purchase order or contract award. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is:

· 333316 Photographic and Photocopying Equipment Manufacturing

There is no solicitation at this time. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred.

1. NCIS requires the following items:

•Lasers & rods can be attached to any of the sides of the Mount to determine the source and destination of the bullet •Tripod Mount eliminates the need to have someone hold the laser •Included Angle Finder can be attached to a trajectory rod or tripod mount to measure exact angles

• (4) Rods are made of .64cm (1/4") steel for durability

• All rods inter-connect with a male and female connection

• Comes with a screw-in aluminum point

•(4) Rods are made of .48cm (3/16") steel for durability •Available with two open ends or with one pointed end •Small rods are fully compatible with all Evi-Paq trajectory supplies

ASP150 Adhesive-Side Powder Kit includes:

1 - ASP50D Dark Adhesive-Side Powder, 50g

1 - ASP50L Light Adhesive Side Powder, 50g

1 - ASP10 EZFLO Super Concentrate, 6 oz

1 - TRA20 Adhesive Tape Releae Agent, 1 oz

1 - KCP300 LPDE Bottle with Cap, 6 oz

2 - 118L Regular Powder Brushes

2 - KCP139 Plastic Tweezers

1 - KCP301 Rinse Basin 2 - KCP302 Mixing Bowl with Lid

2 - SF00771 Disposable Latex Gloves, Pair

1 - KCP303 Measuring Spoon, 1 tsp

1 - Instructions for TRA20

1 - ASP501 Texturized, Molded, Plastic carrying Case This kit contains all the components necessary to develop latent prints on the adhesive surface of tapes, labels and similar surfaces. Adhesive-side powder yields excellent results on duct tape, plastic tapes (clear, frosted and opaque), paper labels and tapes (except those with water-activated adhesives), vinyl packing labels and paper-backed adhesive labels. Poor to excellent results are possible on cloth surgical tape (excellent fidelity but low contrast). The TRA20 adhesive tape release agent allows tangled tape to be released without damage to latent prints which may be present. Complete instructions are included.

ASP150 Adhesive-Side Powder Kit includes:

1 - ASP50D Dark Adhesive-Side Powder, 50g

1 - ASP50L Light Adhesive Side Powder, 50g

1 - ASP10 EZFLO Super Concentrate, 6 oz

1 - TRA20 Adhesive Tape Releae Agent, 1 oz

1 - KCP300 LPDE Bottle with Cap, 6 oz

2 - 118L Regular Powder Brushes

2 - KCP139 Plastic Tweezers

1 - KCP301 Rinse Basin

2 - KCP302 Mixing Bowl with Lid

2 - SF00771 Disposable Latex Gloves, Pair

1 - KCP303 Measuring Spoon, 1 tsp

1 - Instructions for TRA20

1 - ASP501 Texturized, Molded, Plastic carrying Case

SPR300 Contents:

2 - SPR1001 Dark SPR, 500ml

2 - SPR2001 White SPR, 500ml

2 - KCP220 Dispenser Spray Heads

2 - Plastic Rinse Water Bottles, 500ml

3 - SF00771 Disposable Latex Gloves, Pairs

1 - 236T16 Spray Magic Cleaner, 16 oz

1 - 144L4 4" Clear Lift Tape

6 - KCP238 4" x 10" Plastic Sheets, 10mil

12 - FPT1C1 Super Cleaner Towelettes

1 - 144L2 2" Clear Lift Tape

1 - LB0011 5.5" x 8.5" Lifted Print Backing Pad, 50 Sheets

1 - KCP110 5" Scissors

1 - KCP223 Plastic Towel Storage Box

1 - SPR3001 Texturized, Molded-Plastic Carrying Case

The Forensic Magnum is particularly suited for forensic lab technicians who need an extremely efficient chemical for detailed examination of items such as clothing or weapons. It's also effective in a variety of situations in a laboratory or at a crime scene that involves a limited search area or smooth vertical surfaces, using a fine mist atomizer.

BLUESTAR Forensic Magnum includes:

1 - Bottle containing 4 Oz (125ml) of chemiluminescent solution

1 - Foil packet containing 3 tablets of oxidizer

The test is performed by applying a few drops of reagents on Benchkote™ paper (plastic-backed filter paper) and applying it to the suspected bullet hole. The test reagents are contained within glass ampoules in specially designed protective plastic tubes, making the process safe for the operator, as there is no direct contact with the chemicals when the ampoule is broken. The 4-step process takes 3-4 minutes from the time of sampling until final results are obtained, enabling quick screening of large numbers of suspected bullet holes. The kit has been designed for simplicity of operation and can be used at a crime scene by any technician or non-scientific personnel with some basic training. Several bullet holes can be examined at each crime scene using only one set of test tubes.

KIT CONTAINS:

1) Kit Case (10.4" W x 13.1" L x 3.33" H)

10) Lead Solvent Ampoules

10) Lead Reagent Ampoules

10) Copper Solvent Ampoules

10) Copper Reagent Ampoules

50) Benchkote Test Papers

100) Plastic Bags

4) Technician Report Forms

1) White Photographic Scale

1) Permanent Marker

Co-aligned for consistent accuracy when conducting trajectory reconstructions Green laser beam Crafted to work with our trajectory and protrusion rods and tripod mount

2. All items will need to be delivered within 7 days.

3. In order for OFS to be in compliance with safety standards, any of the items that have chemicals or are hazardous, the vendor will need to supply an electronic version of the Material Safety Data Sheet. The sheet is a document that list information relating to occupational safety and health for the use of various substances. Only one copy will need to be provided once the contract is awarded on items that are applicable.

4. Please provide applicable NAICS Codes to procure all required items.

The government will evaluate market information to ascertain potential market capacity to provide services consistent in scope and scale with those described in this notice and otherwise anticipated; secure and apply the full range of technical resources required to successfully perform this requirement; and provide services under a performance based service acquisition contract.

Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses or procured through full and open competition, and multiple awards may be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.

Submission Instructions: Interested parties who consider themselves qualified to provide the development services required that will address or can be configured to address the requirements listed above are invited to submit a response to this Request for Information Notice by Wednesday November 14, 2018 12:00 PM EST. In your submission please provide the following information: 1) organization name, address, email address, website address, telephone number; 2) size and type of ownership for the organization (socio-economic program as applicable); 3) tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability; 4) DUNS & CAGE Code; and 5) Federal Supply Schedule as applicable; 6) estimated cost to meet the requirements listed above. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. Please do not submit more than the minimum information necessary. All responses under this Sources Sought Notice must be emailed to Keshia McKinney at Keshia.mckinney.ctr@ncis.navy.mil.

If you have any questions concerning this opportunity, please contact:

Keshia McKinney Contract Specialist

NCIS

571-305-9854

Shekela Hutchinson Contracting Officer

NCIS

571-305-9287