Revise SOW for REPAIR BELT SANDBLAST N6264926QB046-0002.pdf
PDF 68 KB Posted
- Attached to
- Repair Conveyor Belt
- Solicitation number
- N6264926QB046
About this file
This is a Statement of Work (SOW) for repair services to a sandblasting system located at the US Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC) in Yokosuka.
The contractor shall provide complete repair services for eight (8) belt conveyors in a Blast Room 3.5x3.5x3.5 sandblasting system (Model: BLS-0517-2S, manufactured by Atsuchi Tekko Co., Ltd., Serial No. BLS-0517-2S, installed in Building 2067). The primary deliverable is replacement of all conveyor belts due to wear and aging. New conveyor belts must meet JIS K6322 #125/2PLY/350W/3.0+1.5 specifications (125N/mm tensile strength, 2 Ply fabric, 350mm wide, 3.0mm top rubber cover, 1.5mm bottom rubber cover) or match existing UNICON 350x125 (6t) belts manufactured by Yokohama Rubber Co., Ltd. The contractor shall furnish all labor, materials, transportation, and supervision. Work scope includes: (1) submitting a Government-approved work schedule; (2) conducting gas inspection of the enclosed pit area; (3) disassembling and removing 18 gratings/metal mesh, 18 collection chutes, 6 connection chutes, and 6 lid plates; (4) cleaning blasting sand using anti-static vacuum cleaners; (5) replacing conveyor belts and adjusting alignment, tension, and centering; (6) reassembling all components; and (7) conducting an operational test witnessed by a Government representative. The contractor shall submit a test report to the Technical Point of Contract upon completion, including material specifications and maintenance recommendations. The Period of Performance is seven consecutive days (excluding weekends and federal holidays), with work completion required by August 31, 2026. The Technical Point of Contract is To Be Determined (TBD).
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Rev: 12 May 2026
Statement of work Repair conveyor belt for sandblast system, X57
1. General
a. The contractor shall provide a repair service to the sandblasting system which is installed in the Insulation Shop (X-57, Bldg. 2067) in US Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), Yokosuka.
b. The Sandblasting system has eight (8) belt conveyors, and their belts need to be replaced due to wear and aging.
c. Unless otherwise specified herein, the contractor shall furnish all labor, materials, transportation, and supervision necessary to conduct this service.
2. Existing equipment
a. Sandblasting system
(1) Model: Blast Room 3.5x3.5x3.5
(2) Manufacturer: Atsuchi Tekko Co., Ltd.
(3) MFR Serial No.: BLS-0517-2S
(4) Year of MFG: 2006
(5) LOCATION: Bldg. 2067, Insulation shop, X-57
b. Belt conveyor
(1) Model: MC35CP1-4.5M_U
(2) Manufacturer: Nikko Co., Ltd.
(3) Conveyor belt: UNICON 350x125 (6t), Yokohama Rubber Co., Ltd.
(4) Quantity: 8EA
3. Requirements. The contractor shall provide repair service in accordance with the following procedure.
a. Schedule. The contractors shall submit a work schedule to the Government for approval. The proposed work period shall be completed within seven (7) consecutive days, excluding weekends and federal holidays.
b. Inspection. The contractor shall verify that existing equipment is functioning properly before replacing the conveyor belts. Additionally, the contractor shall be responsible for conducting a gas inspection of the enclosed area before entering the pit where the belt conveyors are installed.
c. Disassemble work. The contractor shall disassemble and remove following components to allow access to the belt conveyors. Government will provide the space in front of the equipment for temporary storage.
(1) Grating and metal mesh: 18EA, Size: 1020Wx970Lx44t (mm), Estimated weight 50kg/EA
(2) Collection chute: 18EA, Size: 985Wx985Lx850H (mm), Estimated weight 40kg/EA
(3) Connection chute: 6EA, Size: 900Wx450Lx850H (mm), Estimated weight 20kg/EA
(4) Lid plate: 6EA, Size: 1010Wx840Lx10t (mm), Estimated weight 70kg/EA
d. Cleaning. The contractor shall collect blasting sand scuttered in the pit and keep them into container bags which will be provided by Government. When the contractor uses vacuum cleaners for cleaning, anti-static model shall be applied.
e. Replace conveyor belt. The contractor shall replace each conveyor belt with new. And the contractor shall adjust the belt alignment such as tension and centering after endless joint work is completed. New conveyor belts shall be same as existing or JIS K6322 #125/2PLY/350W/3.0+1.5.
(125N/mm tensile strength, 2 Ply fabric, 350mm wide, 3.0mm top rubber cover, 1.5mm bottom rubber cover)
f. Assemble work. The contractor shall reassemble the removed components to original condition.
4. Operational test
a. The contractor shall conduct operational test after the completion of repair service.
b. The operational test shall be witnessed by a representative of Government.
c. The operational test shall be confirmed that the belt conveyers shall be operated normally without belt misalignment, improper tension and/or poor rubber joints.
d. If any problems other than this repair are found, the contractor shall submit a condition report and the cost estimation to the Government.
5. Test report
a. The contractor shall submit the satisfied test report to Technical Point of Contract (TPOC) upon completion of the operation test.
b. The test report shall include the material specifications of conveyor belt and any recommendations for future maintenance that are found during inspection and repair service.
6. Period of Performance (POP). The contractor shall complete the required work within seven (7) consecutive days by August 31, 2026.
7. TPOC : To Be Determined (TBD)
File details come from the government source that posted it. Updated .