Attachment_A-Salient_Characteristics-N6230619PR100NV.pdf

Statement of Work Shipping Cases June 13, 2019

1. INTRODUCTION:

It has been determined that the Naval Oceanographic Office (NAVO) will require the purchase of one hundred

(100) polyethylene shipping cases.

2.Salient Characteristics The shipping cases shall be Brand Name or Equal to the Hardigg BL1143-0527-AC-032-HZY-P-CB Roto Molded Single Lid Case. Minimum interior size is 95 inches length 24 inches width 24 inches height :

Lid Configuration Removable

Hardware Plastic Handles/Zinc Latches

Interior Length (Minimum) 114 inches

Interior Width (Minimum) 33 inches

Interior Height (Minimum) 32.62 inches

Lid Height (Minimum) 27.25 inches

Material Medium Density Polyethylene

Manufacturing Process Roto Molded

Interior Polyethylene Custom Foam (Specification provided in section 2.1.2)

Water Resistance Waterproof

Handles Spring Loaded

Latches Military Twist Latches

Wheels 3.5 inch removable casters

ATA Rated ATA Spec 300, Category 1

Certificates MIL-STD-810, MIL-STD-2073, MIL-T-28800, ASTM 4611

Card Holder 4 inch x 6 inch

Valve Pressure Release Valve

Indicators Humidity

Colors (40) Yellow; (10) Orange; (40) Light Blue; (10) Dark Blue

2.1.2 Customizable Pull-Out Foam Insert (able to be configured to meet the following interior specifications) Foam inserts with serrated pull-out foam for each case shall be able to be configured to meet the following dimensions:

Configuration #1 Length: 95” (241.30 cm) Width: 16.50” (41.91 cm) Diameter: 12.50” (31.75 cm)

Configuration #2 Length: 99.50” (252.73 cm) Width: 16.50” (41.91 cm) Height: 16.75” (42.55 cm)

Configuration #3 Length: 90” (228.60 cm) Width: 16.50” (41.91 cm) Diameter: 12.50” (31.75 cm)

Configuration #4 Length: 88.25” (224.16 cm) Width: 16.50” (41.91 cm) Height: 16.75” (42.55 cm)

3. DELIVERY SCHEDULE:

Delivery of the equipment shall be no later than 3 months after award.

4.INSPECTION AND ACCEPTANCE:

A. The government shall retain the ability to refuse delivery if there is obvious damage to product and or shipping containers upon arrival at the government premises.

B. Vendor shall pay for shipping of the cases to the delivery address and include the line item in their invoice to the government. The vendor shall be responsible for damages incurred by the carrier during transit.

5. DELIVERYADDRESS:

Naval Oceanographic Office TO: Eula Woods/Ellen Woods ATTN: Rory Toon/Lee Chambers, Code NP3 MSAAP BLDG 9134, Code N113

STENNIS SPACE CENTER, MS 39522