N61331-21-T-VT31 Q-A.docx

12 KB Posted

Attached to
LCS Table Fixture -WOSB SET-ASIDE
Solicitation number
N61331-21-T-VT31
Issued by

View the file

Other files

File Type Posted
SUPPLY- COMMERCIAL-hq -options.docx DOCX document
C- SOW.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

N61331-21-T-VT31 Q&A

Industry Question #1:

For CDRL A002, does the dimensional inspection report required to be 100% of the parts, or just a sample size?

Our internal procedure is IAW ANSI/ASQ Z1.4 (C) = 0, General Level II, AQL 2.5. For example, for the fixture plate P/N 8741733-1, we would make 18 pieces and inspect 5 pieces from the lot of parts.

We can inspect 100% of the parts, but if we go with our internal sample size, I can significantly reduce the cost.

Government Response #1 We agree with a sample of the product (ie. sample of 5 of the 18).

Thanks for the question, it makes sense not QA every piece if the initial fabrication pieces are sampled/inspected.

End

File details come from the government source that posted it. Updated .