SOW_Boat_Racks_25Q0121.pdf
PDF 303 KB Posted
- Attached to
- Boat Rack Removal and Installation Federal contract opportunity
- Solicitation number
- N5523625Q0121
About this file
This Statement of Work (SOW) details requirements for the removal and installation of pallet racks at the NAVSEA Southwest Regional Maintenance Center's New Boat Barn facility located next to Building 3602 in San Diego, CA. The contractor must remove existing pallet racks from 4 bays and install new galvanized pallet racks in the same location for miscellaneous equipment storage (not boat storage). The vendor is required to provide their own lifts and material handling equipment.
The new pallet rack system specifications include 5 teardrop uprights (42" deep x 192" tall galvanized 14 gauge with 3" x 3" columns and seismic footplates), 24 step beams (144" long x 6" face with 6,337 lbs static capacity), and 36 wire mesh decks (42" deep x 46" wide with galvanized 3 channel step supports). The installation area dimensions are 48' length x 6' depth x 18' height. The period of performance is 6 weeks from contract award. Points of contact are Jeremiah Miller (619-556-8020) and Paul Grdina (619-556-2608) from the SWRMC Diving Department. The SOW includes a standard clause stating that Southwest Regional Maintenance Center will not be liable for payments related to delays or additional work not properly negotiated and approved by the contracting officer.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Scope: NAVSEA Southwest Regional Maintenance Center
New Boat Barn Pallet Racks, located next to Building 3602
2. Points of Contact: SWRMC Diving Department/ C.970
2.1. Jeremiah Miller; JEREMIAH.J.MILLER24.CIV@US.NAVY.MIL; 619-556-8020
2.2. Paul Grdina; PAUL.M.GRDINA.CIV@US.NAVY.MIL; 619-556-2608
3. Description: The vendor shall remove old boat barn pallet racks and install new boat barn pallet racks. Additionally, the vendor is required to have their own lifts and all necessary material handling equipment to ensure the successful completion of the work.
3.1. Pallet Rack Characteristics
3.1.1. Quantity 5 each teardrop uprights, 42” deep x 192” tall galvanized 14 ga, 3” x 3” column w/ 5” x 8” seismic footplates
3.1.2. Quantity 24 each step beams, 144” long x 6” face – galvanized 14 ga, 1-1/2” step, 3 pin connection, static cap: 6,337 lbs
3.1.3. Quantity 36 each wire mesh decks, 42” deep x 46” wide – galvanized 3 channel step supports, 1-1/2” waterfall
3.1.4. Area Dimensions where racks will be installed: L 48’ x D 6’ x 18 H’
3.1.5. No boats are being stored on the shelving. These are pallet racks for miscellaneous equipment storage
3.1.6. No boats are being stored on the shelving. These are pallet racks for miscellaneous equipment storage
3.1.7. No boats are being stored on the shelving. These are pallet racks for miscellaneous equipment storage
3.2. Type of pallet racks: Galvanized
3.3. Pallet Racks Teardown
3.3.1. Teardown existing pallet racks – 4 bays and package old material and material stays on site.
3.4. New Pallet Racks Installation
3.4.1. Install new pallet racks – 4 bays in same location as old pallet racks were located.
4. Further Consideration: Southwest Regional Maintenance Center will not be liable for any payments related to delays or additional work that has not been properly negotiated and approved by the contracting officer.
5. Installation Service Location
5.1. NAVSEA Southwest Regional Maintenance Center
Boat Barn next to building 3602 Womble St
San Diego, Ca 92136
6. Period of Performance
6.1. Upon awarded through 6 Weeks
File details come from the government source that posted it. Updated .