N5523620Q0082 Redacted J-A.pdf

(Revised April 2018)

JUSTIFICATION FOR SOLE SOURCE / BRAND NAME SOLE

SOURCE (Simplified Acquisitions < $250K)

AUTHORITY: 41 U.S.C. 1901 - Simplified Acquisition Procedures FAR 13.106(b): Soliciting From A Single Source

PLEASE CHECK ALL APPLICABLE BOXES AND FILL IN ALL APPLICABLE BLOCKS BELOW. A

NARRATIVE MUST BE ADDED TO ALL APPLICABLE SECTIONS. CHECKING A BOX IS NOT SUFFICIENT.

Funding Document Number:

The material and/or service listed on this form is (please mark one):

Sole Source Brand Name Sole Source

Restricted to the following source or manufacturer:

Manufacturer:

Manufacturer POC and Phone Number:

Manufacturer Address:

Dealer POC and Phone Number (if applicable):

Dealer Address (if applicable):

Description of the item(s) or service(s) required and the estimated cost(s):

Item# MFG Name MFG Part# Description Qty U/I Unit Price Ext Price

*** If additional items are required, please provide on a separate spreadsheet

Required Delivery Date (RDD) or Period of Performance (POP):

Specific characteristics of the material or service that limit the availability to a sole source/brand product (unique features, function of the item, etc.). Describe in detail why only this source/brand can furnish the requirements to the exclusion of other sources/brands.

The requested material or service represents the minimum requirements of the Government.

The material or service must be compatible in all aspects (form, fit and function) with existing systems presently

(Revised April 2018) installed/performing. Describe the equipment/function you have now and how the new item/service must coordinate, connect or interface with the existing system.

A patent, copyright or proprietary data limits competition:

The items are “direct replacement” parts/components for existing equipment. Provide the information about the Next

Higher Assembly (NHA)/equipment which the replacement parts are going into (e.g. description, model, part number, Original Equipment Manufacturer (OEM), etc.).

Other information to support sole source/brand name sole source procurement. The rationale must then justify

"either" substantial duplication of cost to the Government that is not recovered through competition or unacceptable delays in fulfilling the mission of the agency.

MAFO Naval Closures is the Original Equipment Manufacture (OEM), and is the only company with the capability to meet one or more of the critical elements as required per the Navy Standards specifications. As, the QAWTD supports the watertight integrity of the ship and this specific QAWTD supports air locking systems; therefore, the required items/ parts must be compatible in all aspects (form, fit and function) with the existing door system.

As such, it is imperative the Government go directly to the OEM company, whom attains the knowledge, and expertise in producing these specific parts, as they obtain all proprietary rights to all materials, drawings, and equipment associated with the required parts. (See OEM sole source letter)

Furthermore, replacement parts and/or replacement of the door must be procured directly through the OEM or its authorized distributor, ADI Technologies.

Lastly, ADI Technology is the only US authorized distributor for the above-mentioned QAWTD.

Furthermore, due to the proprietary nature of these items, the required parts can only be obtained from the OEM; in which, is the only company that can provide the required parts as set forth above.

Description of Items are as follows:

Quantity One Each, P/N: C940980, Door, MAFO, 26 Inch by 66 Inch, Quick Acting Watertight Door (QAWTRTT), 8 Dog, Left Hand, CRES, With 6 Inch Fixed Light, With Dead Light Cover, With CPS Latch

Quantity One Each, P/N: C940986, Door, MAFO, 26 Inch by 66 Inch, Quick Acting Watertight Door (QAWTRTT), 8 Dog, Right Hand, CRES, With 6 Inch Fixed Light, With Dead Light Cover, With CPS Latch

Thus, both the Contract Specialist and Contracting Officer have determined that the circumstances of this action would result in a substantial duplication of cost that could not be recovered through competition if the agency does not move forward with a sole source procurement for the QAWTD. The Government would incur duplicate costs for research and development, ship alt expenses, and expense in time and effort for solicitation, competition, and evaluation.

Furthermore, in the event the door is not procured through ADI and/or MAFO, the Government will experience significantly unacceptable delays in fulfilling the Navy's mission. SWRMC would be at a high risk for on time delivery being unable complete the repairs required during the ship availability due to prohibitive delay for the required research and development, ship alt, and time and effort for solicitation, competition, and evaluation.

Lastly, in accordance with FAR 13.106-1(b), the contracting officer deems only one source is reasonably available. Moreover, procurement of this product from any other source would result in substantial duplication of costs to the Government that could not be recovered through competition because the Government would be required to purchase an entirely new system similar to the existing Forced Draft Blower.