R06 C291 Normandy Harpoon SOW Rev 2.pdf

R06 – Rev 2

STATEMENT OF WORK

Short Title: C291 Normandy Harpoon Title: C291 USS Normandy (CG-60) Harpoon Launcher Support Structure (LSS) Corrosion Control and Refurbishment

Type of Order: Completion

1. Period of Performance:

Start Date: 20 Jul 2020 Completion Date: 19 Jul 2021

2. Place(s) of Performance:

2.1. Contractor's Facility, Norfolk

2.2. MARMC and Naval Station Norfolk

3. Description of Effort: The PCMS and SSPC QP-3 Qualified Contractor provide technical support and engineering services for Mid-Atlantic Regional Maintenance Center (MARMC), Code 291.

3.1. Contractor shall provide a Team to remove, inventory and crate for further shipment designated HARPOON equipment, LSS’s, Clamp Frames and associated Hardware from the Ship as directed by SME. Multiple SME’s shall be identified by government IAW Current FY NAVSEA Standard Item 009-90. This Team shall be utilized for removal, inventory and crating for shipment of the HARPOON material to the Contractor’s Facility for Refurbishment. The Ship will be located at Naval Station Norfolk.

3.2. Contractor shall provide corrosion control applications including Pyrox Wash, restore and provide repair as directed to the designated HARPOON Launcher Support Structures (LSS’s) including welding repair of damaged ground studs, structure and base metal IAW Current FY NAVSEA Standard Item 009-12.

3.3. Contractor shall install Non-Skid Safety Walk to designated LSS Ladder Rungs and Platforms.

3.4. Contractor shall apply corrosion control including Pyrox Wash, restore and provide repair as directed to the designated

HARPOON Clamp Frame Assemblies including the 6159222-104 Clamp Frames and shall shim and align 5169222-104 Clamp Frames as required.

3.5. Contractor shall inventory, retain, clean and refurbish all designated LSS and Clamp Frame Hardware.

3.6. Contractor shall ensure all Spacers/Shims associated with a Ship’s LSS Foundation shall be properly identified, retained and marked with Hull #, Firing Location and Pad designation for example: (DDG 57; Port Firing; Pad D)

3.7. Contractor shall provide a written schedule identifying all Quality Assurance (QA) Points, tests and measurements on the LSS’s, and Clamp Frames. All tests shall be witnessed by the SME or a designated government representative prior to the start of the next preservation procedure. Any required rework or paint corrections shall be noted in writing and approved by the SME prior to the start of any rework / corrections.

3.8. Contractor shall apply PCMS tiles on designated HARPOON LSS’s and Clamp Frames IAW Current FY NAVSEA Standard

Item 009-78.

3.9. Contractor shall install Harpoon Fuel Leak, Connection, Nomenclature Placards as well as fabricate Shims IAW NAVSEA Dwg 6243167 and NAVSEA Dwg 5169228 as required.

3.10. Contractor shall inventory, retain and account for all necessary NSN material as specified by NSWC-PHD Technical Note

TN 4G20-02-95 Rev E dtd 21 October 2014 (as required).

3.11. Contractor’s Team shall reinstall and properly torque a designated set of Refurbished HARPOON LSS’s and Clamp Frames on the Ship as directed by SME.

3.12. Contractor shall record and report all Environmental, Cleanliness, Profile, Conductivity / Chloride, Paint Application, Dry Film Thickness (DFT) and Wet Film Thickness (WFT) Readings per Appendices 1-7A of Current FY NAVSEA Standard Item 009-32, as appropriate.

3.13. Contractor shall have suitable facilities to paint, dry, and/or refurbish steel harpoon launcher weighing 5055 pounds, 71 inches wide, 100.7 inches tall, and 125.36 inches length.

4. Government Furnished Information (GFI)/Equipment (GFE)/Material (GFM):

4.1. Government Furnished Information (GFI):

4.1.1. Current NAVSEA Standard Work Item 009-32; NAVSEA Standard Work Item for Cleaning & Painting.

4.1.2. Current NAVSEA Standard Work Item 009-78; NAVSEA Standard Work Item for PCMS Installation.

4.1.3. Current NAVSEA Standard Work Item 009-12; NAVSEA Welding, Fabrication, and Inspection

Requirements.

4.1.4. Current NAVSEA Standard Work Item 009-90; NAVSEA Technical Representative

4.1.5. NAVSEA Dwg 7498087; DDG 51 Ship Class HARPOON PCMS Installation.

4.1.6. Required NSN material with appropriate Part numbers, quantities and NATO Stock Numbers.

4.2. Government Furnished Equipment (GFE):

4.2.1. HARPOON Bolt Removal Press (As required).

4.2.2. Mk 129 Mod 0 Hoisting Clamp Frame Sling (HCFS) (As Required).

4.3. Government Furnished Material (GFM):

4.3.1. LSS Hardware as specified by NSWC-PHD Technical Note TN 4G20-02-95 Rev E dtd 21 October 2014 (as required).

4.3.2. LSS Identification Plates (2), as required.

4.3.3. Exemplar LSS Placards (Fuel Leak & Connection), as required.

4.3.4. Passive Counter Measures System (PCMS) material required by NAVSEA Dwg 7498087.

4.3.5. Designated HARPOON equipment may be used as Pool Spares and replacement equipment as identified by

SME.

5. Contractor Furnished Equipment (CFE)/Material (CFM)/Transportation (CFT):

5.1. Contractor Furnished Equipment (CFE):

5.1.1. General-purpose hand tools are considered normal tools of the trade and are to be provided by the contractor.

5.2. Contractor Furnished Material (CFM):

5.2.1. Consumables, tools and materials required to support this effort. Contractor shall provide material that is not available through the Federal Supply System, i.e. miscellaneous parts, tools and hardware. Appropriate crating material for LSS’s, Clamp Frames, and Associated Hardware (for transport), primer, paint, welding equipment and other material incidental to the effort as required.

5.3. Contractor Furnished Transportation (CFT):

5.3.1. Over-the-road Extended Low-Boy truck transportation for the LSS’s, Clamp Frames and Securing Bolts to/from Contractor’s Facility. Forklift for material movement of LSS’s and Clamp Frames within Contractor’s Facility.

6. Travel: Travel is not authorized.

7. Security: The highest level of security required for this Contract is Confidential. Personnel performing classified work or requiring access to classified material or spaces under this effort shall possess both a DOD security clearance at the appropriate (or higher) level and the need to know.

8. Other Requirements:

8.1. The contractor shall comply with any and all applicable NAVSEA Standard Items in the execution of this effort.

8.2. The contractor shall provide a copy of all relevant personnel and/or facility certifications and qualifications for this effort with their quote/proposal. Including but not limited to:

8.2.1. SSPC QP3 certified as required in NAVSEA Standard Item 009-32

8.2.2. Local facility (NTE 50 miles) to allow NAVSEA Basic Paint Inspector (NBPI) Harpoon SME’s to perform all government check points as required by NAVSEA Std Item 009-32

9. Points of Contact:

9.1. Subject Matter Expert (SME):

Elizabeth Carpenter, MARMC C291, (757) 400-0876, elizabeth.carpenter@navy.mil Scott Thomas, MARMC C291, (757) 400-0874, scott.w.thomas3@navy.mil