STATEMENT_OF_WORK_.pdf

STATEMENT OF WORK

1.0. INTRODUCTION.

1.1. Background and Objective. This Statement of Work (SOW) defines the requirements for the supply and delivery of the parts listed in 2.1 be delivered to DLA Distribution Norfolk RMC PROJ, Bunker Hill Towaway

Bldg. X136, and Norfolk, VA 23511.

2.0. GENERAL REQUIREMENTS

2.1. The Contractor shall supply and deliver the material listed complying with the following specifications:.

DESCRIPTION / PART NUMBER QTY U/I

Cam, Dog Bar Switch, Left Facing, Steel, MIL-S-

22698, Grade D, CL U, 53711, PN 6843014-29

28 EA

Cam, Dog Bar Switch, Right Facing, Steel, MIL-S-

22698, Grade D, CL U, 53711, PN 6843014-30

28 EA

Actuator Arm Assembly, 53711, PN 7041559-574 2 EA

Coupling, PN 7041559-79 8 AY

Liner, 1 1/2 Inches OD by 13/16 Inches ID by 3/8

Inches Thick, OSS, ASTM A36, 53711, PN

7041559-80

30 EA

Actuator Arm Clevis, Steel HSS, 53711, PN

7041559-56

4 EA

Idler Eyebolt, 53711, PN 7041559-15 4 EA

Idler Arm Clevis, 53711, PN 7041559-32 4 EA

Idler Arm Clevis Pin, 53711, PN 7041559-36 4 EA

Hinge Clevis Pin, QQ-N-286, K-Monel, 53711, PN

7041559-19

8 AY

Bushing, 1.8785 Inches OD by 2 Inches Long, MN-

BRZ, QQ-B-728, Class A, Half Hard, 53711, PN

7041559-42

16 EA

Actuator Arm Clevis, Steel HSS, 53711, PN

7041559-1

8 EA

Bushing, 1.378 Inches OD by 1.5 Inches Long, MN-

BRZ, QQ-B-728, Class A, Half Hard, 53711, PN

7041559-53

4 EA

Bushing, 2.0035 Inches OD by 1.5 Inches Long, MN-BRZ, QQ-B-728, Class A, Half Hard, 53711, PN 7041559-54

4 EA

Round, 3-3/4 Inches Diameter by 8-3/16 Inches

Long, CRES CL 316, QQ-S-763, Condition A, 53711, PN 7041559-7

4 EA

Bushing, 3.254 Inches OD by 1.25 Inches Long, MN-BRZ, QQ-B-728, Class A, Half Hard, 53711, PN 7041559-17

8 EA

Bushing, 2.504 Inches OD by 1.75 Inches Long, MN-BRZ, QQ-B-728, Class A, Half Hard, 53711, PN 7041559-18

8 EA

Pin, Hinge Clevis, 70472, PN 62-83,-84 8 EA

Clevis, Actuating Arm, 34293 4 EA

Arm, Actuating, 34293 4 EA

Pin, Idler Arm Clevis, 34293, PN 624-85,-86 4 EA

Pin, Dog link, Md bar, 3/4 Inch Diameter by 3 Inches

Long, CRES 316, 34293, PN 624-18

14 EA

Pin, Pivot Rod End, 34293 58 EA

Pin, Pivot Base End, 34293 58 EA

Wedge, Dog, Lefthand, 34293, PN 624-4 58 EA

Wedge, Dog, Righthand, 34293, PN 624-3 58 EA

Shaft Hinge, Md Bar. 3 Inches by 14-1/2 Inches

Long, CRES 316, 34293, PN 624-79

8 EA

Coupling, Idler Arm Clevis, 34293, PN 624-81 32 EA

Hub, Gear Coupling, 34293, PN 624-80 16 EA

Sleeve Assembly, Gear Coupling, 34293, 624-110 2 AY

Washer, Thrust (Oilite Brz), 2-1/4 Inches by 4-1/2

Inches OD by 1/4 Inch Thick, 34293

4 EA

Note: All material to be in accordance with Work Item and reference as follows:

Reference: Technical Manual S9169-AL-MMA-010 REV 4, Sideport Cargo Shell Closure System

Technical Manual referenced in the SOW, S9169-AL-MMA-010 REV 4, may be accessed by contacting:

Mid-Atlantic Regional Maintenance Center (MARMC)

Technical Library

9727 Avionics Loop, Bldg. LF-18

Norfolk, VA 23511

Phone: 757 400 0737

2.2. Required Date of Delivery: 02/01/21 or earlier

3.0. DELIVERY / ACCEPTANCE

3.1. Delivery shall be made to the following address:

DLA Distribution Norfolk RMC PROJ

Bunker Hill Towaway Bldg. X136

Norfolk, VA 23511

M/F: M. McKelvey

3.2. Shipping terms shall be FOB Destination. The product shall be accepted and inspected at FOB Destination.

Shipping cost shall be included in the quote.

4.0 Evaluation Criteria

4.1. The basis for award is Low Price Technically Acceptable.