N4523A18RC39381_SOW.docx

STATEMENT OF WORK (SOW)

JML #: 8081-3403

DD2276 #: N4523A18RC39381

Title: NAVSEA Certified Fiber Optic Training

Period of Performance: TBD

1. BACKGROUND: NAVSEA Certified Fiber Optic Training The training requirement defines “fiber work” to a new level of definition that completely changes the understanding of what requirements are needed across every shipyard.

Must be on the NAVSEA Certified Fiber Optics Trainers List (CFOTL) to provide this training.

REFERENCES: Drawing 8477552 Rev A, as required by MIL-STD-2042C and MIL-STD-1678-1D Section 1306 Personnel Proficiency requirements.

2. SCOPE: Training Course consists of the following:

1. Core Module (4hrs)

2. Blown Optic Fiber Module (32hrs)

3. Cable Handling, Penetration and Repair/Modification Module (16hrs)

4. Fiber Optic Interconnection Box / Tube Routing Box Forming, Routing, Shaping Module (8hrs)

5. Fiber Optic Termination – Single Terminus (Light Duty) Module (8hrs)

6. Fiber Optic Termination – Multi-Terminus (Heavy Duty) Module (16hrs)

7. Fusion Splicing Module (8hrs)

8. Optical Testing Module (12hrs)

This training is intended for personnel that will perform all aspects of fiber optic cable installation, termination and testing on board US Navy Ships to include Blown Optical Fiber Installations and Fusion Splicing. Personnel taking this training course will also be certified as Fiber Optic Workers, Quality Assurance Inspectors, and Supervisors. Training is to be provided according to the seats, dates, and class names as listed below:

12 seats Date TBD NAVSEA Certified Navy Shipboard Fiber Optic Training Course (13 Days; 104 hours)

12 seats Date TBD NAVSEA Certified Navy Shipboard Fiber Optic Training Course (13 Days; 104 hours)

10 seats Date TBD NAVSEA Certified Fiber Optic Termination & Testing Course (5 Days; 40 hours)

14 seats Date TBD NAVSEA Certified Navy Shipboard Fiber Optic Supervisor & QA Course (5 Days; 40 hours)

3. DELIVERABLE ITEMS: Certification certificate for the training courses listed in section 2 for each employee for the corresponding courses that each employee attends.

4. CONTRACTOR FURNISHED MATERIAL: All facilities, classroom equipment, and curriculum are the responsibility of the contractor. This is to be training conducted at a facility certified per NAVSEA requirements in NAVSEA Drawing 8477552 Rev A, with certified curriculum and certified instructors per the same drawing.

5. SECURITY REQUIREMENTS: Originator determines if a DD254 (Department Of Defense Contract Security Classification Specification) is required.

6. GOVERNMENT REPRESENTATIVE:

PUGET SOUND NAVAL SHIPYARD & IMF

ATTN: Dennis Krotzer, Shops 51-67

1400 FARRAGUT AVE., STOP 2007

BREMERTON, WA 98314-2007

Phone: 360-340-6503 Fax: 360-476-4742 E-Mail: dennis.krotzer@navy.mil

7. Environmental and Safety Concerns:

7.1 Safety and protection programs established at PSNS & IMF (Bremerton, WA) require the use of personal protective equipment, such as hard hats, safety eyeglasses, safety shoes, and hearing protection.

7.2 Environmental, Safety and Health: The Contractor shall comply with current applicable federal, state, and local laws, codes, ordinances, and regulations in their entirety. Any reference to a specific portion of a federal, state, or local law, code, ordinance, or regulation in this PWS shall not be construed to mean that relief is provided from any other sections of the law, code, ordinance, or regulation. The Contractor shall comply with all current environmental, health, safety, and hazardous waste requirements/regulations including, but not limited to the following:

· 29 CFR 1915, Occupational Safety and Health Standards for Shipyard Employment;

· PSNS & IMF Memorandum, Environment, Safety, and Health Requirements for Code 1202 Contractors at the Bremerton Naval Complex; Serial Number 430/431, dated 20 Sept 10,

· PSNS & IMF Publication, NAVSHIPYDPUGET P5100 Handbook for Contractors and Visitors;

7.3 Accident/Injury/Environmental Mishap Report: Reports of accidents, injuries, and environmental mishap incidents/events (actual and potential) involving Contractor personnel and equipment shall immediately be reported by verbal means to the COR, the designated Project POC, and the QA/ESH Director. Verbal reports shall be followed within 24 hours by a written report after each occurrence.

The accident/injury/environmental mishap report, as a minimum, shall contain the following:

· Identity of Contractor/subcontractor witnesses;

· Descriptive location of incident/mishap (e.g. ship name and hull number, space, compartment name, compartment location, frame number, etc.);

· The type of incident/mishap (e.g. accident, collision, fire, fall, environmental spill, etc.);

· The name and PSNS & IMF badge number of each injured or affected person;

· Date and time of the accident, injury, and mishap;

· A brief description of the incident/mishap including occurrences and conditions leading up to the incident/mishap;

· Extent of each personal injury or property damage sustained;

· Whether personal injuries required medical treatment or property damage required immediate repair to prevent further damage or injury to personnel or property

NOTE: The Contractor shall cooperate with each environmental, health, safety, and accident/mishap investigation.