TECHNICAL CAPABILITY CERTIFICATIONS.docx
DOCX document 13 KB Posted
- Attached to
- ITT Goulds Centrifugal Pump Federal contract opportunity
- Solicitation number
- N4215824QE017
About this file
This document contains a technical capability certification table for a federal solicitation. The table requires vendors to certify whether their product meets each listed capability for Clinical Number 1, which specifies an ITT Goulds Pumps model 3196STI centrifugal pump. The pump must have a 5-inch impeller, deliver 100 GPM at 40 PSIG with 52 PSIG shutoff head, and have stainless steel and specified non-metallic wetted parts. It also lists motor specifications and requirements for mounting the pump and motor on a fabricated steel base plate with vibration and temperature monitoring.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N4215824QE017.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT
TECHNICAL CAPABILITY CERTIFICATIONS
In order to be considered for award, the below table(s) must be completed for each CLIN being quoted in its entirety and submitted with your quote.
Vendor shall certify for each CLIN being quoted that his product meets or does not meet each capability listed below by initialing in the applicable YES or NO box beside each capability.
| Technical Capabilities for Clin No. 1, Relay |
| YES |
| NO |
ITT Goulds Pumps Model 3196STI (Size 1X1-1/2-6)
5” DIAMETER FULLY OPEN IMPELLER,
100 GPM AT 40 PSIG,
52 PSIG SHUTOFF HEAD,
1-1/2” CLASS 150 FLAT FACE FLANGE SUCTION CONNECTION,
1” CLASS 150 FLAT FACE FLANGE DISCHARGE CONNECTION,
1/2" FEMALE NPT CASING DRAIN CONNECTION, 1/4" FEMALE NPT SUCTION AND DISCHARGE GAUGE CONNECTIONS, 1-3/8” DIAMETER SLEEVELESS SHAFT DESIGN, TAPER BORE SEAL CHAMBER, 316 STAINLESS STEEL WETTED PARTS, BUNA-N OR EPR OR PTFE OR ARAMID FIBER/EPDM GASKETS, GREASED FOR LIFE BALL BEARINGS, MOTOR (5 HP, 3 PHASE, 60 HZ, 230/460VAC CONTINUOUS DUTY, 3500 RPM, TOTALLY ENCLOSED FAN COOLED (TEFC), NEMA 184TC FRAME WITH PRE-LUBRICATED DOUBLE SHIELDED BEARINGS), THE PUMP SHALL BE MOUNTED ON THE MOTOR VIA A C-FACE ADAPTER MOTOR SUPPORT, THE PUMP/MOTOR ASSEMBLY SHALL BE MOUNTED ON A 21” WIDE X 40” LONG FABRICATED STEEL BASE PLATE WITH A 15” X 37-1/2” LAYOUT PATTERN FOR THE BASE PLATE MOUNTING HOLES, VIBRATION AND TEMPERATURE MONITOR MOUNTED ON THE POWER END OF THE PUMP, JOHN CRANE CARBON/TUNGSTEN CARBIDE MECHANICAL SEAL INSTALLED,
File details come from the government source that posted it. Updated .