N4033918RD009.pdf

SEE ADDENDUM

(No Collect Calls)

N4033918RD009 11-Jun-2018

b. TELEPHONE NUMBER

971-50-600-5633

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 26 Jun 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N403399. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

SHIELA D. CRUZ

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N4027318RC001A5

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NAVSUP FLC BAHRAIN OFFICE

FLEET SUPPORT,

UMM HURAIR, BUR DUBAI,

P.O. BOX 9343

DUBAI

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N40273 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

(N40273) RIVERINE NECC

MICHAEL SIX

PORT UF RUJAIRAH

FUJAIRAH

TEL: +971566862208 FAX:

9714-3094810FAX:

TEL: 9714-3094818 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

337127

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF70

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N4033918RD009

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot OFFICE FURNITURE, FIXTURES and EQUIPMENT

FFP

in accordance with the Statement of Work.

FOB: Destination

MILSTRIP: N4027318RC001A5

PURCHASE REQUEST NUMBER: N4027318RC001A5

NET AMT

STATEMENT OF WORK

1. Generic specifications for the required items are listed below:

Item no.

Item Description Qty U/I Unit Price

Extended Price

1 60" Television LED 4K Ultra HD Smart TV, 60", Black 4K Ultra-HD TV delivers incredible picture crispness and dramatic detail with four times the resolution of full-HD, United Arab Emirates power/plug

8 Ea

2 42" Television LED 4K Ultra HD Smart TV, 42", Black 4K Ultra-HD TV delivers incredible picture crispness and dramatic detail with four times the resolution of full-HD, United Arab Emirates power/plug

3 Ea

3 Exam table Manual Exam Table, Five Drawers of Storage, Seamless Upholstered Top, Rubber Grip Pull Out Step, Manual Pneumatic Back, Standard Ht.32", Pull out leg rest with integrated treatment tray, Paper Roll Holder Paper, 18", 19" and 20", Foot Step, Weight Capacity: 500 lbs, Tan Vinyl Seat, beige metal paint

1 Ea

4 Exam light Dual Intensity LED Exam Light-Floor stand. Construction: Exam Floor Light. Low Level lluminance:25,000 lux (2323 fc) at 18" (46 cm). High Level illuminance: 50,000 lux (4645 fc) at 18" (46 cm), Color Temperature: 4600 K,CRI (Color Rendering Index): 93, Light Source: Light Emitting Diode (LED), Rated Life of LED: 40,000 hours average LED life, Power: United Arab Emirates power/plug, Power Supply: Integral electronic driver, Maximum Arm Reach: 45" (114.30 cm), Certifications/Approvals: UL/IEC 60601-1/60601- 1-2 3rd Edition, UL/IEC 60601-2-41, CB Certified, white

1 Ea

5 Wire cages, 48"W x 48"D x 90"H rack & wire tenant locker, single tier with ceiling; 10 gauge diamond pattern woven steel wire partitions built on angle iron frames; wire mesh back panels; latch to allow for padlock

6 Ea

6 Washer Energy Star Qualified - CEE Tier III Rated Commercial washer Front load, gas dampers and springs to minimize movement of the was drum during spin cycle, 3.5 CU. FT. capacity, enhanced software to adjust load distribution reducing vibration and noise, cikd wash cycle, reinforced 6-rib commercial-grade washer belt with metal reinforcement, 1200 RPM spin speed, built-in sensors to detect load size and automatically adjust water usage, whites cycle, extra rinse option, commercial-grade stainless steel wash basket, sensor-controlled suds detection, delicate cycle, heavy duty cycle, front serviceable, 3-tray dispenser drawer for detergent/bleach/fabric softener, control lockout, delay start option, 12 wash cycles, 10-year limited parts warranty on the washer motor and basket, ADA Height/side/front reach compliant, 5 spin cycles, 3 soil selections, 3 temperature selections, non-coin operation, United Arab Emirates power/plug, white SIZE: 27"W x 30.5"D x 36" H

10 Ea

7 Dryer, stacked Energy Advantage Rated Commercial stack electric dryer on dryer Front load, 26.9"W x 29"D x 78.2"H, Commercial Stack Electric Dryer, 18 Lb/8.2 Kg Washer Capacity, 14 cu. ft. Capacity, side swing solid doors, stainless steel drum, vented, 10" front touch pad control, Push to Start, Hybrid Emech control type, 10 Front Control, 1/3 HP Motor, front access serviceability; Programs: Regular, Perm Press, Delicate, Time Dry, Quick Dry, Pluff Up cycles; Extra-Large Capacity with Large Door Opening, United Arab Emirates power/plug, white

8 Ea

8 Refrigerator Frost Free, Dynamic Condenser Type, Quiet, Electric, 27 Cu. Ft., Free-Standing, LED Freezer Lighting, freezer Drawer, Deep lower Plastic Basket with Adjustable Divider, Full-Width upper basket, ENERGY STAR® Certified, Sabbath Mode (Star-K® Certified), CSA Certified, 27.2 Cu. Ft., 18.5 CU FT Fresh Food, 8.7 CU FT Freezer, 23.5 SQ FT Fresh Food Shelf Area, 7.5 SQ FT Freezer Shelf Area, No water/ice dispenser, No ice maker, 69-7/8"H x 36"W x 33-3/8"D, 68-5/8" case height, 69-7/8" height with hinges and covers, 35-7/8" Case Wide x 28-3/4" Case Deep, 33-3/8" Deep with Doors (no Handles), 35-7/8" Deep with Doors and Handles, 47-3/8" Deep (with Door 90° Open), Hidden Door Hinge Covers, Adjustable Front Rollers, Rear Rollers, Door Stops, Door Closers, Cantilever Shelves, 2 Half-Width Spill safe Sliding Shelves, 2 Clear Crispers, 2 Humidity Controls, Full-Width Full-Extension Cool Drawer Meat/Deli Drawer, 2 Clear 1-Gallon Adjustable Door Bins, 2 White (1 Per Door) Fixed Door Bins, Clear Right dairy Door, White Left Door Hanging Can Rack, 1 Flip-Up Spill Safe Fixed Quarter-Width Shelves, Air Filter Change Indicator Light, Quick Supplemental Freeze, United Arab Emirates power/plug, Stainless Steel

4 Ea

9 Marker Board, 48"H x 72"W

Aluminum finish frame, non-porous magnetic porcelain dry erase board with satin-finish aluminum frame, non-absorbent porcelain enamel surface, resists scratching/denting and cleans without ghosting or shadows, designed for heavy use, mounting systems includes clear plastic hangers with a pre-installed round hole, can be hung horizontally or vertically, attachable full length marker tray with protective plastic end caps included, for use in the horizontal position, 30% pre-consumer recycled aluminum frame, dry erase marker and eraser included

18 Ea

10 Tack board, 48"H x 72"W

Vinyl tack bulletin board features excellent pin-holding and resealing properties, plus cleans easily with soap and water. Heavy-gauge aluminum frame with strong mitered corners. Heavy duty

17 Ea mounting kit included, Tan vinyl

11 Ice machine and scoop

Ice Machine, Self-Contained, Ice Production per Day 112 lb., Ice Storage Capacity 20 lb., Cube Size 1.26 In. 1.42 In. 1.34 In., Cube Type Bell Shaped, Air Condenser Cooling, Automatic Defrost, Automatic Cleaning System, Inlet Size 3/4 In., Drain Size Inner :

15Outer : 20, Cord Length 8 ft., Refrigerant R-404A, Top Door Hinge, Door Type Sliding, Overall Height 35-1/2 In., Overall Width 20-1/2 In., Overall Depth 25 In, United Arab Emirates power/plug, stainless steel/black

1 Ea

12 Commercial freezer and refrigerator split

27”W x 29 1/2”D x 78 3/8”H, self-closing doors, 3 adjustable heavy duty PVC coated shelves, 9 foot cord, 2 self-contained independent refrigeration systems, United Arab Emirates power/plug, Stainless steel

1 Ea

13 Microwave oven Luxury Full Size 2.2 Cu Ft Capacity with 16" Diameter Turntable 1250W High Power 10 Power Levels, 5 cooking Stages, Cook A Round Automatic Turntable Quick Minute (add minute) feature;

More/Less Control Easy to use pop out dial elegant design; inverter technology, Easy to use pop out dial, stainless steel, Inverter Turbo Defrost Technology is an advanced microwave sequencing system using the inverter low power delivery feature. A pulsing delivery of very low microwave power keeps the temperature of your food at a constant level without overcooking, United Arab Emirates power/plug, Stainless steel

2 Ea

14 Coffee maker 12 Cup Digital LCD Coffee Brewer 3 Lower Warmers 2 Gallon/Hour Dual Voltage Automatic Coffee Brewer; three lower warmers; pour over type; 200 oz. tank that provides back-to-back brewing capacity capability that allows brewing either 4. 2 or 7. 5 gallons an hour; also outfitted with technology which simplifies brewer programming with an LCD display; can set brew level, cold brew lock-out and tank temperature all from the front of the machine; access electronic diagnostics for troubleshooting; Coffee extraction is controlled by pre-infusion, pulse brew and digital temperature control; Built-in tank drain, Cold brew lockout capability, Automatic warmer shut-off, Energy saving mode; 3 glass decanters, United Arab Emirates power/plug, Stainless steel

2 Ea

15 Toaster four slice toaster, functions: toast, reheat, defrost, bagel, United Arab Emirates power/plug, Stainless steel/black

2 Ea

16 Blender Commercial food blender, variable speed, 64 ox. (2 liter) high impact, clear container with wet blade, black base, 54 page recipe and technique guide, 2 peak horsepower, NSF certified, cUL listed, United Arab Emirates power/plug

2 Ea

17 Electric range 30" Freestanding electric range, 29-7/8" W x 28-13/32" D x 47-3/4" H, 4 Adjustable Leveling Legs, self-cleaning system, 1 incandescent interior lighting, storage drawer, 5.7 total capacity, UL approved, center rear warming zone, upswept black smooth top cooking surface, 4 clear element on indicator light, 1 clear hot-surface indicator light, 6"-9" left front cooking element, 6" left rear cooking element, 9"-12" right front cooking element, 6" right rear cooking element, aluminum with stainless steel control panel, stainless steel drawer, smudge proof stainless steel door, smudge proof stainless steel exterior finish, stainless steel handle, controls: bake, variable broil, cancel, convection bake, convection roast, delay bake, delay clean, automatic oven (delay cook & off), lockout, lower storage

1 Ea drawer controls, 2-3 hours scrool thru self-clean, easy probe, timed bake, 12 hour timer shutoff, timer, control lock; stainless steel knobs, United Arab Emirates power/plug, even baking technology, hidden bake element, 1 flat & 1 stepdown oven rack, 7 oven rack positions, extra-large window, griddle accessory, stainless steel and black porcelain

18 Marker Board, 48"W x 36"H aluminum finish frame, non-porous magnetic porcelain dry erase board with satin-finish aluminum frame, non-absorbent porcelain enamel surface, resists scratching/denting and cleans without ghosting or shadows, designed for heavy use, mounting systems includes clear plastic hangers with a pre-installed round hole, can be hung horizontally or vertically, attachable full length marker tray with protective plastic end caps included, for use in the horizontal position, 30% pre-consumer recycled aluminum frame, dry erase marker and eraser included

6 Ea

19 Bunk beds - twin, 2 high with mattresses tool‐less, multi‐height adjustable using internal steel pin hardware;

headboard and footboard function as ladder ends; solid wood posts;

metal spring bed deck; nylon glides; 350lb minimum weight capacity. bonnell power edge innerspring mattress; cover is sewn in the middle of the border on 3 sides, inverted, and the end flap is folded neatly and closed with a double lock stitch, walnut finish

68 Ea

20 Compact refrigerator freestanding counter high refrigerator, 20"W x 20"D x 35"H, 3.6 cubic foot refrigerator, Includes frozen food compartment with one ice tray, Polyurethane foam insulated, 2001 energy compliant, Full-range temperature control, Triple-decker door storage, Timer auto defrost feature, Three slide-out adjustable wire shelves, 3 door shelves offer ample room for soda, beer, and snacks, and a crisper below the bottom shelf keeps fruits and vegetables fresh, Flip-up freezer door, Two leveling legs, Reversible door, Manual defrost, UL listed, A freezer compartment runs across the top of the shelves, ice cube tray included, the thermostat operates via a dial control, smooth-back design, United Arab Emirates power/plug, stainless steel

1 Ea

21 Projection screen, 96"W

White matte high resolution, baked enamel casing features powder coated end caps and a flat back design for simple wall mount or stable ceiling suspension, mounting hardware included. Matte white screen produces a gain of 1.1. Easy to install. 96"W x 96"H screen size, reliable heavy-duty screen retraction springs, flame retardant and mildew resistant for long term value, 1 Ea

22 Commercial refrigerator

27”W x 29 1/2”D x 78 3/8”H, 1 Solid self-closing door, 3 adjustable, heavy duty PVC coated shelves, 9 foot cord, Exterior temperature display, United Arab Emirates power/plug, stainless steel

1 Ea

23 Medical Refrigerator w/ alarm

Premier Pharmacy/Vaccine Glass Door Refrigerator; 26 Cu Ft capacity; One swing glass door, self-closing (energy efficient, double pane vacuum insulated), right hinged, not reversible;

Microprocessor Temperature Controller; adjustable operating temperature range: 36°F–46°F (2°C–8°C); Refrigerator/Freezer freestanding thermometer with 3 year certificate of calibration, with min/max memory, °F/°C switchable; Standard Digital Temperature Display and Alarm Module; .1° Resolution Sample simulated digital temperature display; Adjustable temperature display in Celsius or Fahrenheit; Audible and visual high/low temperature alarms; Sensor error alarm; Power failure alarm; Resettable 1-point Min/Max History; Remote alarm contacts; Alarm validation (audible, visual, and remote alarm); Alarm mute with ring back; 2 probes - 1 in air and 1 in sample bottle; 6 total shelves, 4 adjustable plus 2 additional;

Vaccine storage power cord warning label; Forced draft air circulation; Keyed door lock; Magnetic door gasket for positive seal;

Heavy duty door handle; LED interior lights are safety shielded and switch controlled; Casters with footed brake; Probe access port 3/8";

Powder coated steel white exterior and interior; CFC-free refrigerant R134a, foam insulation and packaging; Pharmacy refrigerator/freezer toolkit and temperature logs; Two year parts and labor warranty, plus an additional three year compressor parts warranty; 28 3/8”W x 36 1/2”D x 79 3/4”H; Cycle defrost; 3/8 HP;

UL/C-UL listed; United Arab Emirates power/plug, White Acrylic Enamel Walls, White Powdercoat Finish with Black Frame around Door

1 Ea

24 High-back task chair w/arms, fully adjustable

Ergonomic Task Chair; Cradle to Cradle Certified; Indoor Advantage Certified; weight activated mechanism; conforming mesh back with removable upholstered slip on jacket; molded foam seat cushion base with memory foam; multi-surface casters for any surface flooring; fully adjustable arms; standard pneumatic cylinder;

easy-to-find and easy-to-identify adjustment controls, graphite chassis; fabric jacket; black polymer base; black casters; Back Fabric: Black; Seat Fabric: Arc-Com Analog AC-60894, Onyx #15;

Carrier: Graphite; Mesh: Black

41 Ea

25 Work stool Stool with height adjustable task arm; Split-pad; upholstered outer shell; standard arms; multi-surface casters for any surface flooring;

swivel with synchronized-tilt; pneumatic height adjustment;

minimum of 5" arm height adjustment; manually adjustable seat pan;

chrome foot ring, Grade F (mid-grade) vinyl, black

11 Ea

26 Mid-back task chair w/out arms, height adjustable

Ergonomic Task Chair; Cradle to Cradle Certified; Indoor Advantage Certified; weight activated mechanism; looser-weave mesh back; intuitive lumbar support into back desk; heavy duty seat cushion can support 350lb.; multi-surface casters for any surface flooring; no arms; adjustable seat depth; basic tilt mechanisms;

standard pneumatic cylinder; easy-to-find and easy-to-identify adjustment controls; waterfall seat, graphite chassis; fabric jacket;

black polymer base; black casters; Back Fabric: Black; Seat Fabric:

Arc-Com Block Party AC-69683, Onyx #14; Carrier: Graphite;

Mesh: Black

4 Ea

27 Training task chair w/arms

Nesting Chair Multi-surface casters for any surface flooring;

reclining back, mesh back, upholstered seat, folding seat, black polypropylene arm caps, aluminum uprights with welded steel frame, flip-up seat to allow for seats to nest, Fabric: Arc-Com Bubbly AC-69325, Onxy #16 or equal

16 Ea

28 Dining chair w/out arms, plastic, on glides

Armless Polypropylene seat and back - Black Polished chrome frame Stacking Sled base 250 lbs. load rated, frame polished, poly shell black

36 Ea

29 Guest chair w/out arms

Four Leg without Arms Wallsaver anti-tip Frame; transitional design; Fully Upholstered Frame; Rated up to 325 lbs.; waterfall seat; heavy duty 24/7; lifetime warranty; performance multi-surface floor saver glides, black frame, Upholstery: Momentum Vario, Blazer

16 Ea

30 Meeting room chair w/arms, height adjustable contemporary style conference room chair with arms; 5-star base and Multi-surface casters for any surface flooring; upholstered back around an internal frame of welded steel rod integrated with a flexible B-surface material and covered with molded CFC-Free polyurethane foam; upholstered seats incorporate a flexible polypropylene seat pan with a molded, dual density cushion of molded, CFC-free polyurethane foam; 2-paddle adjustable seat height and tilt lock; seat height adjustment lock-out; aluminum back supports; fixed D-arms; aluminum base and arms, Black Faux Leather

8 Ea

31 Club chairs w/tablet arm lounge chair with tablet arm; 33"H x 35"W x 31"D; tight seat; right arm seating; fully upholstered; wood tablet; wood legs, Walnut tablet arm & legs, Upholstery: Maharam Pick Crypton, Jet

20 Ea

32 Task chair w/out arms, non-adjustable

Light task chair; bleach cleanable mesh back (10:1); upholstered seat; fixed arms; flex at the hip 14 degrees; movement-friendly back & arm support; clean-out space for easy maintenance; lifetime warranty; Multi-surface casters for any surface flooring, black base with black caster, Upholstery: Momentum Vario, Blazer

3 Ea

33 Lounge chair lounge chair; 33"H x 35"W x 31"D; tight seat; fully upholstered;

wood legs, Walnut legs, Upholstery: CF Stinson Dart, Abyss #63652

10 Ea

34 Office chair Floor Rocker and Base with casters; 3-in-1 ergonomic task chair that converts into a floor richer with a table/stool in seconds;

armless; tilt-lock control and adjustable tilt tension' pneumatic cylinder provides smooth hright adjustment and 360-degree swivel; state-of-the-art engineered polymer construction frame and base; contoured foam cushions that are easily removable for cleaning/repair/replacement; 10-year warranty; 19.75"W x 23"D x 32.25-35.25"H; 360 degree swivel; Multi-surface casters for any surface flooring

6 Ea

35 Love seat upholstered loveseat; 36"H x 60"W x 38"D, 48"W x 22"D inside dimensions; wood legs; attached cushions, Walnut legs, Upholstery:

dark brown faux leather

3 Ea

36 Break table chair solid wood folding table chair; synthetic leather seat cushion;

2.375" thick padded seats with spindle, slant-back style;

traditional striaght legs and heavy-duty steel support brackets;

folds to a compact 8.67" deep

4 Ea

37 Sofa upholstered sofa; 36"H x 84"W x 40"D, 71"W x 21"D inside dimensions; wood legs; attached cushions, Walnut legs, Upholstery:

dark brown faux leather

1 Ea

38 Desk, 24"D x 48"W rectangular laminate top; 18"H 16 gauge steel modesty panel; 16 gauge steel full end panels, 2 grommets, Laminate: tan speckled, Edge: PVC to match top, Paint: Medium tone

4 Ea

39 Workbench, 72"W x 24"D

Standing height work table with storage and height adjustability;

Pre-engineered work bench with three drawers and lock; Adjustable bench-legs include levelers, provide bench heights from 27 1/4" to 36 1/4" (add 1 5/8" for top); Electrical knockout on each leg; Utility drawer includes sliding tray and padlock attachment; Outlet strip with surge protector; Load capacity 1,000 lbs.; 2" x 2" tublar steel legs and side/back stringers; Work surface: solid substrate; bullnose front profile; Height adjustment through leg extenders in 2" increments; leveler glides, stainless steel work surface Powder coated steel legs and frame

12 Ea

40 Desk, 66"W x 24"D, right pedestal rectangular laminate desk with right BBF pedestal, pencil tray, 18"H 16 gauge steel modesty panel, 2 grommets, 16 gauge steel full end panels, Laminate: tan speckled Edge: PVC to match top Paint:

medium tone

2 Ea

41 Desk, 66"W x 24"D, left pedestal rectangular laminate desk with left BBF pedestal, pencil tray, 18"H 16 gauge steel modesty panel, 2 grommets, 16 gauge steel full end panels, Laminate: tan speckled, Edge: PVC to match top, Paint:

medium tone

3 Ea

42 Desk, 66"W x 24"D, left pedestal, overhead storage rectangular laminate desk with left BBF pedestal, pencil tray, 18"H 16 gauge steel modesty panel, 2 grommets, 16 gauge steel full end panels; overhead storage bins with task light below, painted doors;

24"H x 66"W tack board between work surface and overhead, Laminate: tan speckled Edge: PVC to match top, Paint: medium tone

1 Ea

43 Desk, 66"W x 24"D, right pedestal, overhead storage rectangular laminate desk with right BBF pedestal, pencil tray, 18"H 16 gauge steel modesty panel, 2 grommets, 16 gauge steel full end panels; overhead storage bins with task light below, painted doors;

24"H x 66"W tack board between work surface and overhead, Laminate: tan speckled, Edge: PVC to match top Paint: medium tone

5 Ea

44 Desk, right return, desk 66"W x 30"D, return 42"W x 24"D, overhead storage

30"D x 66"W desk with left BBF pedestal, center pencil drawer;

24"D x 42"W right return with right FF pedestal, pencil tray; 18"H 16 gauge steel modesty panel at desk, 16 gauge steel access panel at return for direct access (at 18" A.F.F.) of power/data from wall; 16 gauge steel full end panels; 2 grommets each at both desk and return;

overhead storage bins stretch from desk over return with task light below, painted doors; 24"H x 72"W tack board between work surface and overhead, Laminate: tan, speckled Edge: PVC to match top, Paint: medium tone

3 Ea

45 Desk, left return, Desk 66"W x

30"D, return 42"W x 24"D, overhead storage

30"D x 66"W desk with right BBF pedestal, center pencil drawer;

24"D x 42"W left return with right FF pedestal, pencil tray; 18"H 16 gauge steel modesty panel at desk, 16 gauge steel access panel at return for direct access (at 18" A.F.F.) of power/data from wall; 16 gauge steel full end panels; 2 grommets each at both desk and return;

overhead storage bins stretch from desk over return with task light below, painted doors; 24"H x 72"W tack board between work surface and overhead, Laminate: tan speckled, Edge: PVC to match

2 Ea top, Paint: medium tone

46 Desk, left return, desk 66"W x 30"D, return 42"W x 24"D

30"D x 66"W desk with right BBF pedestal, center pencil drawer;

24"D x 42"W left return with right FF pedestal, pencil tray; 18"H 16 gauge steel modesty panel at desk, 16 gauge steel access panel at return for direct access (at 18" A.F.F.) of power/data from wall; 16 gauge steel full end panels; 2 grommets each at both desk and return, Laminate: tan speckled, Edge: PVC to match top, Paint: medium tone

4 Ea

47 Desk, right return, Desk 66"W x

30"D, return 42"W x 24"D

30"D x 66"W desk with right BBF pedestal, center pencil drawer;

24"D x 42"W left return with right FF pedestal, pencil tray; 18"H 16 gauge steel modesty panel at desk, 16 gauge steel access panel at return for direct access (at 18" A.F.F.) of power/data from wall; 16 gauge steel full end panels; 2 grommets each at both desk and return, Laminate: tan speckled, Edge: PVC to match top, Paint: medium tone

5 Ea

48 Computer Kiosk, 36"W x 24"D

36"W x 24"D rectangular laminate top; 18"H 16 gauge steel modesty panel; 16 gauge steel full end panels, 2 grommets, Laminate: tan speckled, Edge: PVC to match top, Paint: medium tone

3 Ea

49 Locker Patriot welded gear locker or equal; 36"W x 24"D x 76"H welded construction; 3/4"W x 1-1/2"H diamond-shaped perforated doors/sides; lockable doors; 3-point cremone latching handle; full width hat shelf; double doors; No center divider; full width bottom shelf; 16 gauge cold rolled steel sides/bottoms/tops/shelves; one piece solid 18 gauge cold rolled steel backs; vertical frame member must not be less than 16 guarge formed to a channel shape and hemmed to create a smooth interior edge, inter membering parts must be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting straing, hole spacing in locker body construction must not exceed 9"; powder coat dry thickness must be between 1 to 1.2 mils (0.025 to 0.03mm); doors must be one piece 14 gauge sheet metal, 3/4" W x 1-1/2"H diamond-shaped perforations, door frames must be 16 gauge formed in a channel shape with continuous vertical door strikes; continuous type hinge, 16 gauge piano hinge easuring full height of door, welded to door and attached to locker frame using steel rivets, tan

98 Ea

50 Utility shelving, 48"W x 18"D x

72"H

Open hot rolled steel T-post shelving with solid shelves (not wire);

baked enamel finish; 12 gauge, hot rolled, one piece quick lock shelf clips on either side of uprights; 5 shelves per unit adjustable on 1- 1/2" centers; lateral cross brace 1" x 12-gauge band formed and punched at each end to bolt to the upright post, two pairs of lateral cross braces used with every three shelving sections; two half panels of heavy gauge steel providing a total of three vertical rows on 1- 1/2" centers for attachment to shelves with sheet metal screws; 18 gauge with front and rear flanged down not less than 1-11/64" with return flanges of not less than 3/8" at approximately 10 degrees, ends are to be flanged not less than 1-11/16" with a 90 degree return flange of not less than 5/8", all corners are lapped and welded, all shelves are punched on 3" centers for divider attachment, the front and rear glanges of the shelf are to be embossed with "18 GA", shelves must be punched at four corners for bolting to uprights, tan

14 Ea

51 Weapons locker Vidmar cabinet double-wide 60"W x 27.75"D X 5-drawer high or equal; pallet base; steel construction; hinge lock bars -double-action bar must be both lifted and swung out of the way to access drawers, secured with a single padlock; 3 - DW65 drawers, 3 - DW80 drawers, tan

5 Ea

52 HAZMAT locker, 43"W x 18"D x

65"H

Flammable Cabinet - 45 Gallon - Manual Close - 43"W x 18"D x 65"H; meet or exceed the NFPA Flammable Liquid Code #30 and the OSHA standard 1910.106 for storage of class I, II and III liquids.

FM approved. All-welded construction provides additional strength and 18 gauge cabinet with 14 gauge doors offers additional fire protection. The double-walled design of these flammable cabinets allows 1-1/2" insulating air space and dual 2" air vents that connect to exhaust system to maintain safe temperatures. Built-in grounding connector and leveling feet. 350 lb. capacity shelves adjust easily on 2-1/2" centers. Doors are equipped with full length piano hinges and feature a spill-proof sill, a flush paddle handle with 3 point latching and a highly visible warning label doors will only latch when they are manually closed. Flush door handle prevents passersby from catching or banging, yellow steel

6 Ea

53 Drawers, 30"W x 28"D x 59"H

7-drawer vidmar cabinet or equal, 3 - 5-3/8" high drawers 1 compartment, 2 - 7" high drawers 9 compartments, 2 - 8-1/2" drawers 12 compartments; pallet base; steel construction, tan; NOT TO EXCEED 30" Wide

19 Ea

54 Utility Shelving w/small parts storage bins, 48"W x 18"D x 74"H high density wire shelves; 12 18"D x 48"W shelves; 66 black plastic storage bins; no casters, stainless steel

12 Ea

55 File cabinet, 36"W x 18"D, 4 drawer high

Lateral File, 4H, 18"D x 36"W Four drawers with hanging rails, counterweights, 20-gauge steel base and top, 22-gauge steel wrapper, 20-gauge steel drawers, drawers with triple extension, telescoping suspension fitted with steel ball bearings and retainers, lock with interlocking system components, electrostatic applied powder-coat epoxy paint finish, steel J-pull, tan

3 Ea

56 Bookcase, 48"W x 18"D x 72"H

Steel bookcase with (4) adjustable shelves, top And bottom shelves are fixed, top/end/back, Panels are securely welded together, weight Capacity each shelf, 800 lbs., cold rolled steel Construction, 18 gauge steel, tan

25 Ea

57 Utility shelving, 48"W x 24"D x

72"H

Open hot rolled steel T-post shelving with solid shelves (not wire);

baked enamel finish; 12 gauge, hot rolled, one piece quick lock shelf clips on either side of uprights; 5 shelves per unit adjustable on 1- 1/2" centers; lateral cross brace 1" x 12-gauge band formed and punched at each end to bolt to the upright post, two pairs of lateral cross braces used with every three shelving sections; two half panels of heavy gauge steel providing a total of three vertical rows on 1- 1/2" centers for attachment to shelves with sheet metal screws; 18 gauge with front and rear flanged down not less than 1-11/64" with return flanges of not less than 3/8" at approximately 10 degrees, ends are to be flanged not less than 1-11/16" with a 90 degree return flange of not less than 5/8", all corners are lapped and welded, all shelves are punched on 3" centers for divider attachment, the front and rear glanges of the shelf are to be embossed with "18 GA", shelves must be punched at four corners for bolting to uprights, tan

25 Ea

58 Chart file stacked two (2) 5-drawer steel flat file for 36" x 48" documents plus closed base; flat file organizer; File organization suited for construction documents, design firms, engineering and more; Case-hardened, ball-bearing rollers for quiet operation; Positive closures and courtesy stops; Rear hood and hinged front depressor; Use organizer individually or in space-saving stack; Optional lock kit includes lock and two keys; Five large-capacity 2 ⅛" deep drawers – 53 ½"W; Stores up to 500 sheets per unit active filing, 750 sheets of semi-active or 1,000 sheets of inactive material; Overall size: 41.5"D x 53.5"W x 16.5"H each; 39" total height with two (2) stacked files plus base. One (1) flat file base; raises 6" off floor; front recessed 2.75" from file; holds up to five files consisting of a combination of five and ten drawer cabinets, Tan powder coat

1 Ea

59 Safe, Class 5, 4 drawer

Four Drawer, Single Lock, Legal Size, 748 lbs; Forced Entry Resistant, multiple X-10 High Security Safety Lock meets Federal Specification FF-L-2740B; GSA approved; 30 man-minutes protection against covert entry, and 10 man-minutes against forced entry, and 20 man-minutes against surreptitious entry; the body and drawer heads are reinforced steel, 5/16" thick; unique interlock design security mechanism lock each drawer and resists intense forced entry attacks, tan

5 Ea

60 Bookcase, 36"W x 12"D x 72"H

Steel bookcase with (4) adjustable shelves, top And bottom shelves are fixed, top/end/back Panels are securely welded together, weight Capacity each shelf, 800 lbs., cold rolled steel Construction; 18 gauge steel, tan

3 Ea

61 Equipment Rack Network Server Rack cabinet, 37U Dual vented rear doors 600mm(W) X 600mm(D), Glass front door with round vented border, Blue edging, 32U enclosure, Dual vented rear doors, Glass front door with round vented border, outer dimension 620mm(W) x 645mm(D), black

3 Ea

62 Storage Cabinet, 42"W x 24"D x

72"D

Metal Cabinet with adjustable shelves in 2" increments to adapt G13

(7) to changing storage requirements; Three-point lock mechanism;

Durable chrome handles; Front leveling glides; Reinforced steel doors on heavy-duty hinges; All-welded 18 gauge construction; Full Lifetime Warranty; 131 lbs, tan; NOT TO EXCEED 42" Wide

14 Ea

63 Various Double-wide cabinets and weapons cradle

a. vertical lift weapons cradle (WCP70-M240-ST) or equal, qty 15;

b. vertical lift weapons cradle (WCP-UNIV-ST) or equal, qty 2; c.

vertical lift weapons cradle (WCP65-M4-ST) or equal, qty 4; d.

double-wide drawer pistol storage (DWPDI65) or equal, qty 1; e.

double-wide cabinet (LDDW870L) or equal, qty 2; f. double-wide cabinet (LDDW570L) or equal, qty 2; g. double-wide cabinet (LDDW1070L) or equal, qty 2; h. double-wide cabinet (LDDW108) or equal, qty 2

1 Lot

64 Training table, nesting, on casters, 36"D x 72"W

High pressure laminate flip top nesting table, tilt Top resulting in vertically stacking table, single Point release mechanism, locking skate soft Casters, heavy duty all-welded lock to ensure Safety, heavy duty mounting beam prevents top From sagging, 1-1/4" thick top, pvc edge, base is Bolted/welded, 14 gauge steel, steel hinges, tlegs. Dimensions: 36"d x 72"w, Laminate: tan speckled, Edge: PVC to match top, Leg finish: medium tone

8 Ea

65 Laundry-folding table, 30"W x 60"D x 36"H

Laminate top laundry-folding table; constructed of 3/4" thick particleboard with high pressure laminate surface; extruded bullnose edges are T-shaped with serrations mechanically locked into table;

2 Ea

18 gauge seam-welded, 1-1/18", Laminate: tan speckled, Edge: PVC to match top, Paint: black

66 Dining table, 30"W x 72"L

30"D x 72"W; Rectangular laminate top with height adjustable T base, 1-1/8" thick high-density particleboard core with high pressure laminate top and phenolic backing sheet, softened rim edge, radiused corners, segmented base, highly durable smooth powder-coated finish, adjustable glides secured to legs, Laminate: walnut wood, Edge: PVC to match top, Leg finish: medium tone

6 Ea

67 Chart table, 72" square

72"W x 72"D x 36"H map table; 4 steel legs; open below to allow for flat files; 1-1/2" thick laminate top with pvc edge banding; must withstand 600# load, Laminate: walnut wood, Edge: PVC to match top, Leg finish: medium tone

1 Ea

68 Meeting table, 84"W x 42"D

Barrel table with 2 column legs, seats 8, column Legs in epoxy painted metal, multiple-piece tops Connect with 1/8" masonite splines for vertical Alignment and steel tite-joint fasters for Horizontal alignment to firmly connect the top End to end, Laminate: walnut wood, Edge: PVC to match top, Leg finish:

medium tone

1 Ea

69 Break table Broadway wood table; folding table; solid hardwood; steel, straight folding legs with locking support brackets; leg levelers; Maybe solid wood or soft, padded center surfact; octagon shaped

2 Ea

70 End table wood end table, Size: 24" x 24" x 20"H, Wood edge banding & legs, walnut wood veneer

5 Ea

71 Wardrobe 24"W x 24"D x 72"H plastic laminate wardrobe locker with 2-drawers at base; steel coat rod across top; steel base; lockable, each unit keyed-different, Laminate: walnut wood Leg finish: medium tone

136 Ea

72 Coffee table wood Coffee table, Size: 24" x 42" 16"H, Wood edge banding & legs, walnut wood veneer

1 Ea

73 Television console 24”D x 60”W x 36”H media storage credenza; Infrared Repeater (IR) which allows multi-media equipment to be stored and controlled behind solid doors; Back panel is not fully finished and includes cutouts for venting, Wood Laminate: Walnut, Edge: Reed, Pull: Softened, Grommet: Black

1 Ea

74 Systems workstation w/transaction top, 8'x8' 65"H

3” Thick x 65” H and 32"H panels; Include all frames, tiles, connectors and top and base trims; Metal tiles below work surfaces.

1 - 54"W x 24"D rectangular plastic laminate work surface, 1 -60"W x 24"D rectangular plastic laminate work surface, 1 - 36" x 36" x 24"D corner plastic laminate work surface. 1 - 36"W overhead storage with door, 2 - 30"W overhead storage with door; painted doors; LED task lights under each overhead with 12' cord. 1 - 24"D x 15"W Box/Box/File pedestal, 1 - 24"D x 15"W File/File pedestal;

freestanding. Electrical: Flex connector in- feed; Base feed module;

1 - duplex receptacles with covers; 1 - Data/Voice receptacles with covers; Wire management; United Arab Emirates power. 12"D x 36"W x 32"H transaction counter; Laminate: tan speckled Edge:

PVC to match top, Paint: medium tone, Panel fabric: Tan

1 Ea

75 Systems workstation, 48"W x 24"D, 53"H panels

3” Thick x 53” H panels; Include all frames, tiles, connectors and top and base trims; Metal tiles below work surfaces. 1 - 48"W x 24"D rectangular plastic laminate work surface. Electrical: Flex connector in- feed; Base feed module; 1 - duplex receptacles with covers; 1 - Data/Voice receptacles with covers; Wire management;

United Arab Emirates power, Laminate: tan speckled Edge: PVC to

15 Ea match top, Paint: medium tone, Panel fabric: Tan

2. Minor deviations (+/-5%) to the listed dimensions of each item is permitted, except for Items #53 and #62.

3. Furniture plan lay-out and sample photos are provided as Exhibit A and Exhibit B respectively.

4. Delivery is required 60 days after date of contract (ADC).

5. Delivery, assembly, installation and post installation removal of any cartons or debris is also required.

INVOICE INSTRUCTION

INVOICE INFORMATION

A proper invoice must include the following information:

(a) Name and address of the Contractor;

(b) Invoice date;

(c) Invoice number;

(d) Contract number or other authorization for supplies delivered or services performed (including order number, contract line item number (CLIN) and, if applicable, the contract subline item number (SLIN);

(e) Description, quantity, unit of measure, unit price, and extended price of supplies delivered or services performed;

(f) Name and address of Contractor official to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment);

(g) Name (where practicable), title, phone number and mailing address of person to be notified in event of a defective invoice; and,

(h) Any other information or documentation required by other requirements of the contract (such as Customer signed completion report).

PAYMENT

(a) The Contractor shall prepare invoices in accordance with the instructions as set forth in Section G. 1 entitled "INVOICE INFORMATION". Invoices shall be marked with the contract and delivery order numbers and submitted to address, which will be determined at time of contract award.

(b) Payment will be made by payment office, which will be determined at time of contact award.

(c) Payment will be made after performance and acceptance of services. The Government will only pay for those services or portions thereof, which have been accepted in accordance with Section E "INSPECTION AND ACCEPTANCE", herein.

(d) The contractor shall submit its invoices to the following address:

NAVSUP FLC BAHRAIN DET DUBAI

US Consulate Dubai Umm Hurair, Bur Dubai Dubai, United Arab Emirates Point of contact: Ms. Laila Montales# +9714 309 4924

(e) No advance payments will be made against this contract. Payments will be processed after completion and within 30 days from the receipt of invoice.

POINT OF CONTACT FOR REQUIRING ACTIVITY

Michael Six, P.E.

Assistant Public Works Officer Public Works Department Bahrain Phone: +973-1785-9143

CELL (Bahrain): +973 39444289

CELL (UAE): +971 566862208

Email: Michael.six@me.navy.mil

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 60 dys. ADC 1 (N40273) RIVERINE NECC

MICHAEL SIX

PORT UF RUJAIRAH

FUJAIRAH

+971566862208 FOB: Destination

N40273

CLAUSES INCORPORATED BY REFERENCE

52.203-3 Gratuities APR 1984 52.204-2 Security Requirements AUG 1996 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-7 System for Award Management OCT 2016 52.204-13 System for Award Management Maintenance OCT 2016 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.229-6 Taxes--Foreign Fixed-Price Contracts FEB 2013 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7005 Oral Attestation of Security Responsibilities NOV 2001 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.209-7002 Disclosure Of Ownership Or Control By A Foreign Government

JUN 2010

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.215-7007 Notice of Intent to Resolicit JUN 2012 252.215-7008 Only One Offer OCT 2013 252.222-7002 Compliance With Local Labor Laws (Overseas) JUN 1997 252.225-7012 Preference For Certain Domestic Commodities DEC 2017 252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.225-7041 Correspondence in English JUN 1997 252.225-7042 Authorization to Perform APR 2003 252.225-7048 Export-Controlled Items JUN 2013 252.225-7979 Additional Access to Contractor and Subcontractor Records in the United States Central Command Theater of Operations

(DEVIATION 2018-O0008) (DEC 2017)

DEC 2017

252.229-7000 Invoices Exclusive of Taxes or Duties JUN 1997 252.232-7008 Assignment of Claims (Overseas) JUN 1997 252.232-7010 Levies on Contract Payments DEC 2006 252.233-7001 Choice of Law (Overseas) JUN 1997 252.237-7001 Compliance With Audit Standards MAY 2000 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Alt I Transportation of Supplies by Sea (APR 2014) Alternate I APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL

CONFIDENTIALITY AGREEMENTS OR STATEMENTS--REPRESENTATION (JAN 2017)

(a) Definition. As used in this provision-- Internal confidentiality agreement or statement, subcontract, and subcontractor, are defined in the clause at 52.203- 19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

(b) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use funds appropriated (or otherwise made available) for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(c) The prohibition in paragraph (b) of this provision does not contravene requirements applicable to Standard Form 312, (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).

(End of provision)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR

STATEMENTS (JAN 2017)

(a) Definitions. As used in this clause-- Internal confidentiality agreement or statement means a confidentiality agreement or any other written statement that the contractor requires any of its employees or subcontractors to sign regarding nondisclosure of contractor information, except that it does not include confidentiality agreements arising out of civil litigation or confidentiality agreements that contractor employees or subcontractors sign at the behest of a Federal agency.

Subcontract means any contract as defined in subpart 2.1 entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract. It includes but is not limited to purchase orders, and changes and modifications to purchase orders.

Subcontractor means any supplier, distributor, vendor, or firm (including a consultant) that furnishes supplies or services to or for a prime contractor or another subcontractor.

(b) The Contractor shall not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).

(c) The Contractor shall notify current employees and subcontractors that prohibitions and restrictions of any preexisting internal confidentiality agreements or statements covered by this clause, to the extent that such prohibitions and restrictions are inconsistent with the prohibitions of this clause, are no longer in effect.

(d) The prohibition in paragraph (b) of this clause does not contravene requirements applicable to Standard Form 312 (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(e) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015, (Pub. L. 113-235), and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions) use of funds appropriated (or otherwise made available) is prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause.

(f) The Contractor shall include the substance of this clause, including this paragraph (f), in subcontracts under such contracts.

(End of clause)

52.209-5 CERTIFICATION REGARDING RESPONSIBILITY MATTERS (OCT 2015)

(a)(1) The Offeror certifies, to the best of its knowledge and belief, that-

(i) The Offeror and/or any of its Principals-

(A) Are ( ) are not ( ) presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(B) Have ( ) have not ( ), within a three-year period preceding this offer, been convicted of or had…