N39040Q5325E029 Attachment 4 Drawings.pdf
PDF 1 MB Posted
- Attached to
- EPD HOLDER, HEAD & HOLDER, CHEST NUC
- Solicitation number
- N39040Q5325E029
About this file
This is an engineering drawing specification for an EPD (Dosimeter) Holder, Head (Model LL-R00-6041) issued by Portsmouth Naval Shipyard, Code 2320 Engineering Division. The document is classified as FOUO (For Official Use Only) and supersedes a previous specification (MDR 6665 LL-RMI-0023 FZ).
The holder is designed as an athletic skull cap with specific technical requirements: a 3" x 1" pile velcro sewn to the front of the cap to mate with a corresponding 3" x 1" hook velcro strap, grommets positioned adjacent to each velcro strap along the top edge of the cap sides, and a centered grommet on the back. All grommets and velcro must be backed with Nomex or similar fire-resistant material on the interior. Additionally, a red cord lanyard approximately 6" long finished with a metal clip must be installed through the back grommet. The drawing was prepared by Sean Fraher on 8/20/2020 and is identified as Sheet 1 of 2, indicating supplementary specification details exist in the complete document set.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FOUO 2 4 5
REV. DATE DRAWN BY PHONE
ORIG 8/20/2020 SEAN FRAHER 207-438-5670
D
GROMMET CENTERED ON BACK
ATHLETIC CAP
C
BACK
GROMMET ADJACENT
TO EACH VELCRO STRAP B
• 3" x I" PILE VELCRO SEWN TO CAP
3" x I" HOOK VELCRO STRAP
TO MATE WITH PILE VELCRO TYP
1 3
PORTSMOUTH NAVAL SHIPYARD �
CODE 2320 ENGINEERING DIVISION 9
RADIOLOGICAL CONTAINMENT DRAWING O
ORIG � A
Head Dosime Holder LY sc,,a Un--.- Fracoons = z1f2 i ifj ASSHOW'tfl �=- Angles =z112• SHEET 1 Of 2 ic, 5 FOUO
ATTACHMENT
annette.young Rectangle annette.young Text Box
SKULL
annette.young Rectangle annette.young Text Box
EPD HOLDER, HEAD, LL-R00-6041
annette.young Text Box
LL-R00-6041, KO 005, KOI 708 [SUPERSEDES MDR 6665 LL-RMI-0023 FZ]
annette.young Rectangle bradford.heaven Cross-Out
FOUO 2 3 4
Special Notes:
1. Velcro and grommets are positioned along the top edge of the side of the cap.
2. Grommets and velcro shall be backed with Nomex or similar on the cap interior.
3. Install a red cord lanyard approximately 6" long finished, with a metal clip, through the back grommet.
A
1 3
N
LL
::; Q
IN
FOLIO
D
C
B
ATTACHMENT
annette.young Rectangle
| Text1: |
| Text2: DD1348 5325E029 |
| Text3: DD1348 5325E029 |
File details come from the government source that posted it. Updated .