LSJ SAP Limited Source Justification Redacted.pdf
PDF 866 KB Posted
- Attached to
- Sole Source Justification to Curtis Wright
- Solicitation number
- N3904027LSJ5676
About this file
This is a Limited Source Justification (SAP) document dated September 30, 2020, authorizing single-source procurement under the Simplified Acquisition Threshold.
The acquisition is for impeller balancing services required as part of maintenance and equipment standards compliance, including SUBMEPP and Shipyard safety standards. The service must be performed by the original equipment manufacturer (OEM) as the Shipyard lacks the capability and resources to perform proprietary impeller balancing in-house. The justification cites restrictive rights under FAR 13.106-1(b)(1)(i), establishing that only one responsible source is available. The OEM does not have alternate authorized or accredited contractors capable of performing this specialized service, and SUBMEPP maintenance standards explicitly require the impeller be sent to the OEM for balancing. The document confirms the requirement does not exceed the simplified acquisition threshold and only one source will be solicited. The justification was certified by Jason Laflamme on June 18, 2026, and approved by Contracting Officer Anthony Barker on August 3, 2026.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SAP
Limited Source Justification
Rev 09/30/2020
(This is only applicable to acquisitions under the Simplified Acquisition Threshold. Acquisition using FAR Subpart 13.5 shall follow the special documentation requirements at FAR 13.501.)
2. EXCLUSIVE LICENSING AGREEMENTS. The item or service is only available from the Original Equipment Manufacturer (OEM), or there is only one authorized distributor or technical representative for the OEM.
Identify the OEM and explain the circumstances surrounding why the item or service is only available from the OEM.
OR:
Identify the distributor(s)/authorized technical representative(s) for the item or service. Provide evidence of the exclusive licensing agreement as an attachment to this document. NOTE: If there is more than one distributor/authorized technical representative for an OEM part, then Part B, BRAND NAME SOLE SOURCE, is applicable, and Part A, ONLY ONE RESPONSIBLE SOURCE, should be left blank).
3. OTHER REASONS. Other reason not identified above. Provide details on mission impact if requirement is not solicited from only one source.
File details come from the government source that posted it. Updated .