N3904025R1007_Individual Repair Part Ordering Data_TOD 2.5in.pdf
PDF 2 MB Posted
- Attached to
- HX: 2. 50 Inch SCH 40 & 4. 00 Inch SCH 80 Pipes
- Solicitation number
- N3904025R1007
About this file
This Individual Repair Part Ordering Data (IRPOD) details specifications for a 2.50-inch small pipe (National Stock Number 1H 4710-01-621-1340 X2) meeting MIL-DTL-32386, TY1, 2-1/2IN, SCH40 military standards. The pipe is a Nickel-Chromium-Molybdenum-Niobium alloy (UNS N06625) seamless pipe with specific requirements including 2.500 IPS Schedule 40, Type I, Class IV, Grade 1 configuration, bright annealed finish, and must be clean and free from mercury contamination.
Quality assurance provisions include hydrostatic testing, liquid penetrant, and ultrasonic testing in accordance with MIL-DTL-32386. The seller must provide an inspection system meeting ISO 9003 (ANSI/ISO/ASQ Q9003) or equivalent standards, and include specific documentation such as certification of quality conformance and chemical requirements. The document is part of a Naval Sea Systems Command procurement activity, with a revision date of 07/30/2024, and requires detailed procedures for manufacturing, testing, and reporting to ensure compliance with military specification standards.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RPTR0lA
ACTIVITY A
INDIVIDUAL REPAIR PART ORDERING DATA PAGE 1
07/30/2024
NATIONAL STOCK NUMBER
lH 4710-01-621-1340 X2
ITEM NAME
PIPE, SML, 2.S0IN
REVISION
20240207125535
TECHNICAL CONTACT
9A288294010376A
DRAWING PREPARER/MANUFACTURER
MILITARY SPECIFICATION
MANUFACTURER'S PART NO./DRAWING NO.
MILDTL32386,TY1,2-1/2IN,SCH40
RSP
A
1.0 SCOPE
THIS IRPOD SATISFIES THE REQUIREMENTS FOR
* LEVEL I *
ORDERING DATA
1.1 THIS IRPOD PROVIDES THE REQUIREMENTS FOR A UNIT REPAIR PART.
2.0 LIST OF APPLICABLE DOCUMENTS
IF A SUPPLIER QUOTES TO A LATER REVISION OF THE DRAWING (OR CATALOG ITEM) THAN
SPECIFIED BELOW, SUBMITTAL OF QUOTE SHALL INCLUDE TWO (2) COPIES OF THE REVISED
DOCUMENT AND AN EVALUATION OF THE INTERCHANGEABILITY. THE FOLLOWING DOCUMENTS AND
CHANGE DATA ARE APPLICABLE TO THE EXTENT SPECIFIED IN THIS IRPOD, THE DRAWINGS, OR
OTHER DOCUMENTS INVOKED BY THIS IRPOD. CONTRACTING AGENCY APPROVAL IS REQUIRED TO
USE EARLIER SPECIFICATION VERSIONS THAN THOSE LISTED HEREIN, EXCEPT AS IDENTIFIED
BELOW. IF NO DOCUMENT VERSION IS LISTED, THEN ANY VERSION OF THE DOCUMENT MAY BE
USED.
RAW MATERIAL REQUIRED HEREIN MAY HAVE BEEN PROCESSED OR TESTED (FOR EXAMPLE, HEAT
TREATED OR ULTRASONICALLY TESTED) AS REQUIRED BY THE RAW MATERIAL SPECIFICATION
PRIOR TO RECEIPT OF THIS ORDER USING PREVIOUS VERSIONS OF PROCESSING OR TESTING
SPECIFICATIONS. THIS PROCESSING AND TESTING NEED NOT BE REPEATED IF:
l.IT COMPLIED WITH THE APPLICABLE REQUIREMENTS OF THE
PROCESSING/TESTING SPECIFICATION VERSIONS IN EFFECT AT THE TIME OF
THE ACTUAL PROCESSING OR TESTING AND;
2.ALL REQUIREMENTS OF THE RAW MATERIAL SPECIFICATION VERSION LISTED
HEREIN HAVE BEEN SATISFIED.
SECTION 6.0 IDENTIFIES SPECIAL REQUIREMENTS FOR SUBMITTAL OF THE PROCEDURES USED
FOR COMPLETED PROCESSING AND TESTING. ALL PROCESSING AND TESTING PERFORMED AFTER
RECEIPT OF THIS ORDER SHALL CONFORM TO THE PROCESSING/TESTING SPECIFICATION
VERSIONS LISTED HEREIN.
DOCUMENT NUMBER
MILITARY SPECIFICATIONS
+ MIL-DTL-32386
MIL-I-45208
AM 1
MILITARY STANDARDS
+ MIL-STD-129
VERSION
A
A
07/24/81
TITLE
NICKEL-CHROMIUM-MOLYBDENUM-NIOBIUM
ALLOY
(UNS N06625) SEAMLESS PIPE
INSPECTION SYSTEM REQUIREMENTS
INSPECTION SYSTEM REQUIREMENTS
MARKING FOR SHIPMENT AND STORAGE
File details come from the government source that posted it. Updated .