N39040254276Q307 Attachment 1 (Technical Specifications).pdf

78 KB Posted

Attached to
Rubber Hose: 2 inch 75 feet long
Solicitation number
N39040254276Q307
Issued by

About this file

Written by GovTribe AI ·

This is a technical specifications document (Attachment 1) detailing requirements for a rubber hose procurement under solicitation N39040254276Q307. The document specifies one rubber hose, 2 inches x 75 feet long, featuring 2-inch ASME B16.5 300lb stainless steel lap-joint flanges (304/316SS), with a non-conductive Teflon inner tube, smooth bore, and stainless steel wire reinforcement.

The technical requirements include that the hose must be continuous length with a minimum bend radius of 6 inches and non-lined flanges with EPDM rubber smooth cover. The hose must undergo hydrostatic testing to a minimum of 800 PSI for at least 5 minutes, with acceptance criteria specifying no leaks, weakness, twisting, deterioration, deformation, or other damage. Packaging requirements stipulate that the hydrostatic test certification must be included within the hose packaging, and the hose can be packaged on a spool with a minimum radius of 6 inches.

View the file

Other files

File Type Posted
N39040254276Q307 Combined Synopsis Solicitation.pdf PDF
N39040254276Q307 Exhibit A (Contract Data Requirements List DD1423).pdf PDF
N39040254276Q307 Attachment 1 to Exhibit A.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQ DOC NO. - 4276V307 ATTACHMENT ___1______

CONTINUATION SHEET CONTRACT NO. - _______________ PAGE _1__ OF _1__

NAME OF OFFER OR/CONTRACTOR

RUBBER HOSE 1 EA

C. DESCRIPTION/SPECIFICATIONS

C.1 RUBBER HOSE: 2 INCH X 75 FEET LONG, WITH 2 INCH ASME B16.5

300LB STAINLESS STEEL LAP-JOINT FLANGES 304/316SS. NON-

CONDUCTIVE TEFLON INNER TUBE, SMOOTH BORE, STAINLESS

STEEL WIRE REINFORCED.

C.1.1 HOSE MUST BE CONTINUOUS LENGTH.

C.1.2 HOSE HAS A MINIMUM BEND RADIUS OF 6 INCHES

C.1.3 FLANGES SHALL BE NON-LINED. EPDM RUBBER SMOOTH

COVER.

C.2 HOSE SHALL BE HYDROSTATICALLY TESTED TO A MINIMUM OF 800

PSI FOLLOWING ASSEMBLY FOR A MINIMUM OF 5 MINUTES.

C.2.1 ACCEPTANCE CRITERIA: NO LEAKS OR SIGNS OF WEAKNESS,

TWISTING OF THE HOSE, DETERIORATION, DEFORMATION OR OTHER

DAMAGE.

C.3 DATA REQUIREMENTS PER EXHIBIT A (DD-1423) & ATTCHMENT #1

C.3.1 CERTIFICATION FOR HYDROSTATIC TEST: EXHIBIT A001.

D. PACKING/PACKAGING/MARKING

ITEM # SUPPLIES/SERVICES QTY U/I

D.1 VENDOR SHALL INCLUDE CERTIFICATION FOR HYDROSTATIC TEST WITHIN THE HOSE

PACKAGING.

D.2 HOSE CAN BE PACKAGED ON A SPOOL WITH A MINIMUM RADIUS OF 6 INCHES.

File details come from the government source that posted it. Updated .