5000 PSI HPAC - Statement of Work.pdf
PDF 165 KB Posted
- Attached to
- ELECTRIC HIGH PRESSURE AIR COMPRESSOR RENTAL
- Solicitation number
- N3904024Q0141
About this file
This document is a Statement of Work (SOW) for an Electric High Pressure Air Compressor rental contract. The key requirements include:
The compressor must be electric-driven, self-contained, and skid-mounted, capable of delivering 5,000 psi of oil-free air at a dew point of -80°F. It must have a 1.5 cubic foot, 7,000 psi ASME receiver and a purification system with filters and a dehydration/purification rack. The compressor must be capable of continuously supplying 30 CFM at 3,000 psi and 18 CFM at 5,000 psi. The vendor must provide maintenance, spare parts, and a 24-hour response time for any issues. The compressor must be certified for use in California.
The related federal contract opportunity is a solicitation (N3904024Q0141) issued by the Department of the Navy Naval Sea Systems Command for the rental of an Electric High Pressure Air Compressor.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation N3904024Q0141 QA.pdf | ||
| N3904024Q0141 Combined Synopsis Solicitation.pdf | ||
| 5000 PSI HPAC - Statement of Work.pdf | ||
| OPSEC Encl 2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ELECTRIC HIGH PRESSURE AIR COMPRESSOR SPECIFICATIONS
5/16/2024
• Electrical:
o Motor is to be 460VAC, 3 Phase, 60 cycle, the starter is to be a pre-wired, soft start, closed transition type. The motor to be suited for operation in an outdoor industrial pier side environment in 0 degrees F temperatures without the need for additional shelter. The motor is to be air cooled.
o The unit shall be wired electrically to enable a single point shipyard connection and equipped with 50 ft. of properly sized cable.
• Mechanical:
o The unit is to be an air cooled High Pressure Air Compressor with controller to deliver oil free air at 5000 psi. The unit is to be electric driven, self-contained, skid mounted with all necessary filters, dryers, and instruments to deliver 4500 psi, oil free air at dew point of -80 degrees F at atmosphere.
o The compressor shall be equipped with a moisture separator and air dryer capable of drying 18 CFM to a dew point of -80 degrees F at atmosphere. All assemblies shall be connected to enable single point connection by the shipyard.
o The compressor is to compress free air from the atmosphere to 5000 psig, deliver 100% oil free air at a rated discharge capacity of 30 CFM @ 3000 PSIG and 18 CFM @ 5000 PSIG, and must be capable of continuously supplying the specified quantity of air at the discharge pressure.
o 1.5 cubic foot, 7000 PSI ASME receiver with safety relief valve, drain valve and 1/2" NPT discharge line service valve o The unit is to be equipped with an integral after cooler, to deliver air under 100 degrees F, and enclosed in a weather proof enclosure.
o Must have a purification system consisting of a dehydration/purification rack, priority valve, upstream and downstream pressure gauges and drain. One mechanical separator and two coalescing filters remove oil and water droplets. Six molecular sieve cartridges remove oil and water vapors. Each cartridge must have a particulate filter to prevent passage of particles downstream. The coalescing filters need a manual filter drain piped into the condensate tank for collection and disposal.
• Service:
o The vendor shall supply a point of contact and telephone number for requesting service if problems arise with equipment.
o The vendor shall maintain a stringent maintenance program and be responsible for equipment failure not arising out of abuse or negligence by the government.
o Vendor shall respond within four (4) hours of notice to the contacting officer that compressor is inoperable, return the unit to service within eight (8) hours, and if the unit cannot be returned to service, a replacement shall be delivered within twenty-four (24) hours at no extra cost to the government.
o Vendor shall provide filters, coolant, and lubricant for engine and compressor for the duration of the rental.
ELECTRIC HIGH PRESSURE AIR COMPRESSOR SPECIFICATIONS
5/16/2024 o The vendor shall be responsible for onsite startup and all routine maintenance, e.g. change oil, filters, etc., except for daily check of liquid levels.
o The vendor must supply an operating manual.
o Equipment shall be delivered in first class operating condition with complete operating instructions.
o The compressor shall be equipped with safety valves and piping to meet ASME Power
Piping safety codes and the unit shall be assembled to meet OSH safety standards.
o The compressor shall be certified for use in the state of California.
File details come from the government source that posted it. Updated .