N3904024Q0043 SOW_Redacted.pdf
PDF 120 KB Posted
- Attached to
- Manufacture Weld Qual Membranes for PNS
- Solicitation number
- N3904024Q0043
About this file
This statement of work outlines requirements for a federal contract to manufacture main omega seal weld mockup membranes. The contractor will produce one hundred each of two different membrane types according to the specifications in drawing 149D1555 Revision K. Critical dimensions are defined for inspection reporting purposes. The membranes will be serially numbered referencing the contract number. The Navy's Portsmouth Naval Shipyard reserves the right to inspect manufacturing and requires technical review and certification be provided. Delivery will include dimensional inspection reports for each membrane. The related solicitation is for this work issued by the Department of the Navy Naval Sea Systems Command as solicitation number N3904024Q0043.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JML DOC #: 3290V100 & 3290V101
Statement of Work
RF‐3077, LIN 0005 and 0006: Main Omega Seal Weld Mockup – Membranes
1. Manufacture one hundred (100) RF‐3077 LIN 0005 Membranes in accordance with drawing 149D1555, Revision K, Pc‐21.
2. Manufacture one hundred (100) RF‐3077 LIN 0006 Membranes in accordance with drawing 149D1555, Revision K, Pc‐22.
3. The Portsmouth Naval Shipyard (PNS) technical Point of Contact (POC) in requesting Code
138.2 is or for Code 2370 is
4. Code 138/2370 requires a technical review of contractor bid(s) prior to contract award.
5. The contractor will comply with all specifications and provide all certifications, material test reports, and dimensional inspection data as outlined in drawing 149D1555K and this statement of work.
6. PNS reserves the right to inspect the manufacturing progress and facility at any time during contract period. A minimum of five (5) working day notice will be given to the contractor for unplanned visits by a PNS representative.
7. Individually mark each manufactured membrane on a non‐critical surface per drawing note
#4. Serial number format shall include the last five (5) digits of the awarding contract, followed by serial number ‐ “S/N XXXXX‐001 through 100”
8. Provide dimensional inspection reports upon shipment for each manufactured component.
Dimensional data is only required for the features listed on the critical dimension list below:
149D1555, Pc‐21 (Membrane) Critical Dimensions:
‐ Lip Thickness, Dim “B” (.035 +.001/‐.002)
‐ Lip Height (.429 +/‐.005)
149D1555, Pc‐22 (Membrane) Critical Dimensions:
‐ Lip Thickness, Dim “B” (.056 +/‐.002)*
*note tolerance deviation from dwg 149D1555 REV K, sheet 2; drawing tolerance for Pc‐
22, Dim “B” of +/‐.001 is in error, tolerance listed in this Statement of Work is correct
‐ Lip Height (.65 +/‐.010) charles.e.chase Highlight
File details come from the government source that posted it. Updated .