Vendor_QA_2025.01.28.pdf

89 KB Posted

Attached to
Dismantle and Removal of Plate Rollers
Solicitation number
N32253-25-Q-0015
Issued by

About this file

Written by GovTribe AI ·

This is a Questions and Answers document for solicitation N32253-25-Q-0015 issued by Pearl Harbor Naval Shipyard & IMF (PHNSY & IMF) regarding the dismantling of plate rollers. The document contains four contractor questions and government responses dated January 28, 2025.

The Q&A clarifies that these are different plate rollers from a previous requirement, and the contractor must transport the rollers to a designated area outside the CIA within 1 mile as specified in the PWS. The document confirms that concrete flush cutting with the floor is not required. Regarding packaging requirements, the government clarifies that the rollers can be secured and palletized or placed on dunnage by the contractor, rather than requiring wooden shipping containers/crates.

View the file

Other files

File Type Posted
41.N3225325Q0015_amendment.pdf PDF
41.b155_H&J_photos_FINAL.pdf PDF
ATTACHMENT II OPSEC Contract Requirements.pdf PDF
41.N3225325Q0015_sol.pdf PDF
APPENDIX I HEALTH and SAFETY - MAR 2024.pdf PDF
41.b155_POPE_photos_FINAL.pdf PDF
APPENDIX II ENVIRONMENTAL (Facilities) - 16-OCT-2019.pdf PDF
APPENDIX_III_OUTSIDECIA - MAR 2015.pdf PDF
Attachment I - Fillable Hot Work Permit.pdf PDF
APPENDIX IV Contractor Cranes on Base 2021-07-19.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PHNSY & IMF: N32253

Solicitation – N32253-25-Q-0015

Plate Rollers Dismantle

RESPONSES TO QUESTIONS (1/28/2025)

1. Question: Are these the same plate rollers that were in a previous requirement?

Answer: No, these are different plate rollers.

2. Question: Will you stage these (packaged) rollers around the building or elsewhere on base?

Answer: PWS requires rollers to be taken to a designated area outside of the CIA by the

Contractor. Designated space is less than 1 mile as stated in the PWS.

3. Question: Will the concrete (lip/edge) have to be flush cut with the floor?

Answer: No.

4. Question: If the PWS calls for dismantling/disassembly/disconnecting these rollers and

(crating them) you know building wooden shipping containers/crates for shipment elsewhere . Will you make the successful contractor actually do this? There have been instances before were a contractor submitted an unbalanced bid that didn't cover the cost of lumber, let alone the price of airfare from the mainland and was still awarded the project somehow?

Answer: ? Per PWS, rollers can be secured and palletized or placed on dunnage by the

Contractor.

File details come from the government source that posted it. Updated .