HRMC-010-24_PWS_rev1_Redacted.pdf

DEPARTMENT OF THE NAVY

HRMC (NMD)

YRBM 32 (YRBM 13204)

SPECIFICATIONS FOR WORK TO BE ACCOMPLISHED

SPECIFICATION NUMBER: HRMC-010-24

INCLUDES ALL CHANGES THROUGH 10/23/2023

INDEX

SHIP: YRBM 32 (YRBM 13204) HRMC-010-24

ITEMS THAT ARE STRUCK OUT IN THIS INDEX DO NOT APPLY TO THIS CONTRACT.

CATEGORY I. FY-24 STANDARD ITEMS APPLICABLE TO THIS JOB ORDER WITHOUT FURTHER REFERENCE.

ITEM NO. TITLE CHANGE DATE CHANGE

009-01 General Criteria; accomplish 09/27/2022 Original

009-02 Environmental Compliance Report for Material Usage; accomplish 09/27/2022 Original

009-03 Toxic and Hazardous Substance; control 09/27/2022 Original

009-04 Quality Management System; provide 09/27/2022 Original

009-05 Temporary Access; accomplish 09/27/2022 Original

009-06 Maintaining Protection and Cleanliness from Non-Radioactive Operations;

accomplish

09/27/2022 Original

009-07 Confined Space Entry, and Certification; accomplish 09/27/2022 Original

009-08 Shipboard Fire Protection and Fire Prevention; accomplish 02/28/2023 CH-1

009-10 Asbestos-Containing Material (ACM); control 09/27/2022 Original

009-18 Mine Warfare Ships Magnetic Material; control 09/29/2022 Original

009-19 Provisioning Technical Documentation (PTD); provide 09/27/2022 Original

009-20 Government Property; control 09/27/2022 Original

009-21 Logistics and Technical Data; provide 09/27/2022 Original

009-23 Interference; remove and install 09/29/2022 Original

009-24 Authorization, Control, Isolation, Blanking, Tagging, and Cleanliness; accomplish 09/27/2022 Original

009-34 Fire Protection of Unmanned Vessel at Contractor Facility; accomplish 09/27/2022 Original

009-39 Technical Manual Contract Requirement (TMCR) for a New Technical Manual for

Commercial Equipment/Component; accomplish

09/27/2022 Original

009-40 Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a

Naval Facility; provide

09/27/2022 Original

009-60 Schedule and Associated Reports for CNO Availabilities; provide and manage 09/30/2022 Original

009-61 Shipboard Use of Fluorocarbons; control 09/27/2022 Original

009-67 Integrated Total Ship Testing; manage 09/27/2022 Original

009-69 Heavy Weather/Mooring Plan; provide 09/27/2022 Original

009-70 Confined Space Entry, Certification, Fire Protection, Fire Prevention and

Housekeeping for Unmanned Vessels; accomplish

09/27/2022 Original

009-72 Physical Security at a Private Contractor Facility; accomplish 09/30/2022 Original

009-73 Shipboard Electrical/Electronic Cable Procedure; inspect, test, install, remove, and repair

09/30/2022 Original

009-74 Occupational, Safety and Health Plan; accomplish 09/30/2022 Original

009-80 Ship Facilities; maintain 09/27/2022 Original

009-81 Compartment Closeout; accomplish 09/30/2022 Original

009-82 Installation of Equal Component Vice Specified Component; report 09/27/2022 Original

009-84 Threaded Fastener Requirements; accomplish 09/30/2022 Original

009-88 Collection, Holding and Transfer (CHT) and Motor Gasoline (MOGAS) Tanks, Spaces, and Piping, including Sewage or MOGAS-Contaminated Tanks, Spaces, and Piping; certify

09/27/2022 Original

009-93 Emergency Planning and Community Right-to-Know Act (EPCRA) and Pollution

Prevention Act (PPA) Information; provide

09/27/2022 Original

009-99 Ship Departure Report; provide 09/27/2022 Original

ITEM_NO. TITLE CHANGE DATE CHANGE

009-100 Ship's Stability; maintain 09/30/2022 Original

009-101 Ship Transit and Berthing; accomplish 09/27/2022 Original

009-106 Work Authorization Form Coordinator (WAFCOR); provide 09/27/2022 Original

009-109 Non-SUBSAFE Work on SUBSAFE-Certified Vessel; accomplish 09/27/2022 Original

009-110 Non-Nuclear Work on a Nuclear Vessel; accomplish 09/27/2022 Original

009-111 Schedule and Associated Reports for non-CNO Availabilities; provide and manage

09/30/2022 Original

009-117 Combat Systems, Light-Off Suport; provide 09/30/2022 Original

009-118 CG Deck Loading; accomplish 09/27/2022 Original

009-120 Fact Finding and Critique of Unplanned Event; manage 09/30/2022 Original

009-122 Temporary Padeye; install and remove 09/30/2022 Original

009-125 Boats Less Than 65 Feet Long; accomplish 10/25/2022 Original

099-01PH Waste Generated on Government Property, including Satellite Accumulation area (SAA), Managing and Disposing of Hazardous Waste (HW) and non-HW;

accomplish

01/20/2023 Original

099-02PH Dry Dock Requirement; accomplish 01/20/2023 Original

099-03PH Additional Environmental Requirements; accomplish 01/20/2023 Original

099-04PH Industrial Wastewater/Oily Wastewater Disposal; accomplish 01/20/2023 Original

099-007PH Radiological Fallout Controls; accomplish 07/13/2023 CH-3

099-08PH Safety of Ship Requirement; provide 01/17/2023 Original

099-40PH Additional Requirements for Contractor Cranes, Multi-Purpose machine, and

Material Handling Equipment at Joint Base Pearl Harbor Hawaii; accomplish

01/17/2023 Original

099-69PH Pier Laydown for Pearl Harbor Naval Shipyard & IMF (PHNSY & IMF)

Availability; accomplish

07/06/2023 CH-2

CATEGORY II. FY-24 STANDARD ITEMS WHICH MAY BE INVOKED IN THE WORK ITEMS OF THIS JOB ORDER.

TITLE CHANGE DATEITEM NO. CHANGE

009-09 Process Control Procedure (PCP); provide and accomplish

09/27/2022 Original

009-12 Weld, Fabricate, and Inspect; accomplish 09/27/2022 Original

009-15 Rotating Machinery; balance 09/27/2022 Original

009-17 Rotating Electrical Equipment; repair 09/27/2022 Original

009-32 Cleaning and Painting Requirements; accomplish 09/29/2022 Original

ITEM NO. TITLE

Hazardous Waste Produced on Naval Vessels; control077-00-001

No. One and 2 CHT Sewage Pump Mechanical Seals and Fluids; replace593-11-001

Collection Holding Tank (CHT) Routine Maintenance and Preservation;

accomplish

593-11-002

Rolling Grill; replace624-12-001

SHIP: YRBM 32 (YRBM 13204) ITEM NO: 077-00-001

COAR: 16 PCN: SERV-L125

CMP: NONE

PLANNER:

SSP: HRMC-010-24 1 of 5 ITEM NO: 077-00-001

1. SCOPE:

1.1 Title: Hazardous Waste Produced on Naval Vessels; control

1.2 Location of Work:

1.2.1 Throughout the Ship

1.3 Identification:

1.3.1 Not Applicable

2. REFERENCES:

2.1 Resource Conservation and Recovery Act (RCRA)

2.2 Federal Hazardous Materials Transportation Act, 49 U.S.C. 5103

2.3 Applicable Hazardous Waste Manifest Form

2.4 10 U.S.C. 7311

3. REQUIREMENTS:

3.1 Manage and dispose of all hazardous waste listed in 3.5 in accordance with 2.1 and 2.2.

3.1.1 When a Navy generator number is required by this Work Item, submit the original of 2.3 to the SUPERVISOR for assignment of Environmental Protection Agency (EPA) or delegated state environmental agency identification number.

3.1.2 Manage and transport for Navy disposal, Navy-generated

hazardous waste listed in 3.5 in accordance with 2.1 and 2.2, as designated by the SUPERVISOR.

3.1.3 Submit one legible copy of 2.3 signed by the owner or operator of the disposal facility to the SUPERVISOR within 48 hours of receipt from owner or operator of disposal facility.

3.2 Complete documentation required by 2.1 and 2.2, using EPA or delegated state environmental agency identification number in accordance with 2.4.

3.2.1 Documentation related to hazardous waste generated solely by the physical actions of Ship's Force or Navy employees (termed Navy- Generated Hazardous Waste) on board the vessel shall only bear a generator identification number issued to the Navy pursuant to applicable law. The contractor shall obtain SUPERVISOR'S concurrence with the categorization of the waste as Navy-generated before completion of the manifest. The manifest prepared shall be presented to the SUPERVISOR for completion after the hazardous waste has been identified.

3.2.2 Documentation related to hazardous waste generated solely by the physical actions of contractor personnel (termed Contractor- Generated Hazardous Waste) shall bear a generator identification number issued to the contractor pursuant to applicable law.

Regardless of the presence of other material in or on the shipboard systems or structure which may have qualified a waste stream as hazardous, where the contractor performs work on a system or

SHIP: YRBM 32 (YRBM 13204)

SSP: HRMC-010-24 2 of 5 ITEM NO: 077-00-001 structure using materials (whether or not the use of such materials was specified by the Navy) which by themselves would cause the waste from such work to be a hazardous waste, documentation related to such waste shall only bear a generator number issued to the contractor.

3.2.3 Documentation related to hazardous waste generated by the combined physical actions of Navy and contractor personnel (termed Co-Generated Hazardous Waste) shall bear a generator identification number issued to the contractor pursuant to applicable law and shall also cite in the remarks block a generator identification number issued to the Navy pursuant to applicable law. When the contractor merely drains a system and such drainage creates hazardous waste or the contractor performs work on system or structure using materials which by themselves would not cause the waste from such work to be hazardous waste but such work nonetheless creates a hazardous waste, documentation related to such waste shall bear a generator identification number issued to the contractor and shall also cite in the remarks block a generator identification number issued to the Navy. The contractor shall sign the generator certification on the Uniform Hazardous Waste Manifest whenever use of the manifest is required for disposal. The contractor shall obtain SUPERVISOR's concurrence with the categorization of the wastes as co-generated before completion of the manifest. Manifests prepared shall be presented to the SUPERVISOR for completion after the hazardous waste has been identified.

3.3 If the contractor, while performing work at a Government facility, cannot obtain a separate generator identification number from the state in which the availability will be performed, the contractor shall notify the SUPERVISOR within three business days of receipt of written notification by the state. After obtaining approval of the SUPERVISOR, the contractor shall use the Navy site generator identification number and insert in the remarks block the contractor generator identification number issued for the site where his main facilities are located.

3.4 If, for availabilities at a contractor-owned or controlled facility, the Navy cannot obtain a separate generator identification number for use at a contractor facility, the Navy shall notify the contractor within three business days of receipt of notification by the state. The contractor shall dispose of hazardous waste in accordance with 2.1, 2.2, and 3.2.3.

3.5 Hazardous waste, as identified in 2.1, expected to be produced during performance of this Job Order:

AMOUNT

TYPE NAVY CO-GENERATED CONTRACTOR

Acid Solutions (may include _____ ____________ __________ spent sulfamic, citric, chromic, nitric, sulfuric, hydrochloric, etc.)

Ethylene Glycol (Antifreeze) _____ ____________ __________

Sodium Hydroxide _____ ____________ __________

Cleaning Solvents _____ ____________ ___10

SSP: HRMC-010-24 3 of 5 ITEM NO: 077-00-001 gal____

Sodium Phosphates (Tri, Bi, _____ ____________ __________ or Mono)

Fluorocarbons _____ ____________ __________

Morpholine _____ ____________ __________

Sodium Chromates _____ ____________ __________

Hydrazine _____ ____________ __________

Methyl Ethyl Ketone _____ ____________ __________

Spent Abrasive Blast Material _____ ____________ __________

(contaminated with a known hazardous waste)

Trichloroethane _____ ____________ __________

Miscellaneous Chemicals _____ ____________ __________

(Ignitable)

Miscellaneous Chemicals _____ ____________ __________

(Corrosive)

Miscellaneous Chemicals _____ ____________ __________

(TCLP Toxic)

Miscellaneous Chemicals _____ ____________ __________

(Reactive)

Oil (Synthetic) _____ ____________ __________

Paints (Enamel, Latex, _____ ____________ ___10 gal_____

Epoxy, thinners, oil based, rubber paint, non-skid, lacquer, remover, varnishes)

Paints (May include lead, _____ ____________ __________ cadmium, or chrome)

Paint Strippers (phenols, _____ ____________ __________ lead, chromium)

Sludges (Contaminated with _____ ____________ __50 gal___ a known hazardous waste)

Wool Felt (contaminated _____ ____________ __________ with chromium and PCB's)

Lube/Fuel Oil Soaked Rags _____ ____________ __________

Paint/Flakes (Pressure Washing _____ ____________ __________

Ext Hull Surfaces)

SSP: HRMC-010-24 4 of 5 ITEM NO: 077-00-001

Fuel Oil(Residual) _____ ____________ __________

Bilge Water _____ ____________ __1000 gal___

Oil/Water _____ ____________ __100 gal__

AFFF/Water _____ ____________ __________

MEK Contaminated Rags _____ ____________ __________

3.5.1 Provide 0 dollars for managing and disposing of all hazardous waste listed in 3.5. Total cost greater or less than above dollar amount will be the subject of an equitable adjustment.

3.6 Submit one legible copy, hard copy or electronic media of a report identifying type, amount, and disposal cost of waste listed in 3.5 that was removed during the performance of this Job Order to the SUPERVISOR.

3.6.1 The report shall include analysis or other method used to identify the waste and state whether each listed waste was hazardous (with generator assignment), non-hazardous, or did not exist.

3.6.1.1 Chemical analysis shall be accomplished by laboratories with state or EPA approved quality assurance programs.

3.6.2 The contractor shall make an effort to minimize hazardous waste generation by reducing the volume or toxicity by neutralizing, recycling, or otherwise removing it from the requirements of Subtitle C of 2.1 and include a description of such efforts in the report.

3.7 Nothing contained in this Work Item shall relieve the contractor from complying with applicable federal, state, and local laws, codes, ordinances, and regulations, including the obtaining of licenses and permits in connection with hazardous waste handling and disposal in the performance of this contract.

4. NOTES:

4.1 The waste listed in 3.5 is based on the best information available at the time of preparation of the solicitation. Hazardous waste generated during the actual performance of the work may vary in type or amount from waste listed in 3.5 which may result in renegotiation for credit or increase pursuant to Paragraph (b) of 2.4. The contractor is expected to use best management practice to identify and dispose of all hazardous waste. Some of the substances listed in 3.5 may be neutralized, recycled, or otherwise removed from the requirements of Subtitle C of 2.1. Inclusion of these substances in the waste listed in

3.5 does not preclude the contractor from taking action consistent with

2.1 to reduce or eliminate the hazardous constituents of any waste required to be disposed of under the contract in accordance with 2.2.

Processes that add hazardous constituents to the bilges may require that bilge water be disposed of as a hazardous waste.

4.1.1 The types and amounts of wastes listed in 3.5 are estimates of waste to be disposed of under this contract as required by 2.4. They are not estimates of the amount of the work involved in generating that waste. The work requirements of each individual Work Item specify the actual work to be accomplished.

4.2 Hazardous wastes are determined by one or more of the following methods:

SSP: HRMC-010-24 5 of 5 ITEM NO: 077-00-001

4.2.1 Chemical analysis which shows that the material

characteristics of ignitability, corrosivity, reactivity, and/or toxicity (Toxicity Characteristic Leachate Procedure - TCLP) exceed the limits for that material in 40 CFR 261.20 Subpart C.

4.2.2 Reference to a Material Safety Data Sheet (MSDS), or

4.2.3 Applying knowledge of the hazardous characteristics of the waste in light of the materials or the process used.

4.3 Asbestos, bilge water, oil/water including sludge, debris and other contaminants, sludge which includes solids and sludge from ballast tanks, CHT tanks, voids, oily waste tanks, fuel ballast tanks, fuel oil tanks, skegs (West coast), PCB's (Maryland), etc., apply only in those states listing them as hazardous waste. When an availability is to be performed in a state where these items are hazardous waste, an estimate of the amount to be generated shall be included in 3.5.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.

SHIP: YRBM 32 (YRBM 13204) ITEM NO: 593-11-001

COAR: 16 PCN: SERV-L123

CMP: NONE

PLANNER:

SSP: HRMC-010-24 1 of 2 ITEM NO: 593-11-001

1. SCOPE:

1.1 Title: No. One and 2 CHT Sewage Pump Mechanical Seals and Fluids;

replace

1.2 Location of Work:

1.2.1 CHT Pump Room (2-2-1-W)

1.3 Identification:

1.3.1 Quantity (2 Sets): CHT Pump pressurized mechanical seal components, Items one through 12 (shown on sheet 11 and 12) of Material Kit A of 2.3.

2. REFERENCES:

2.1 Standard Items, FY-24,CH-1

2.2 S9086-T8-STM-010/CH-593, Pollution Control

2.3 593-53013 ECP530, Sew Xfer Pmp Cartr Prsrzd Mech Seal

2.4 528-5560149 Rev C, Plumbing Drains and Vents - Hold

2.5 528-5560153 Rev A, CHT Sewage System Tank

3. REQUIREMENTS:

3.1 Accomplish the requirements of 009-88 of 2.1, for the equipment listed in 1.3 and located in 1.2.

3.1.1 Upon notification by the SUPERVISOR, open the manhole covers to tank listed in 1.2. Ensure Marine Chemist provides Gas Free service to tanks,required spaces and entry posting for service/work.

3.1.2 Accomplish and provide the requirements of 009-09 of 2.1 for a step-by-step procedure on how all work and repairs shall be accomplished and certified.

3.1.2.1 Accomplish a pre-shift briefing with all parties

involved and with the SUPERVISOR present, to verify necessary parts and equipment is on hand to start work.

3.2 Replace with new, CHT pumps One and 2 cartridge seals and components, listed in 1.3.1, located in 1.2, in accordance with 2.3.

3.2.1 Replace with new propylene glycol fluid (NSN 6810-01-181-712) in each CHT pump reservoir using 2.3 for guidance.

(V)(G) "OPERATIONAL TEST"

3.3 Accomplish an operational test of the CHT system, including each disturbed CHT pump assembly, using 2.3 through 2.5 for guidance. Verify correct Pump Motor rotation. Measure and record Pump Motor current and voltage during initial startup and test duration. Criteria: No obstructed flow, binding, and or leakage allowed.

3.3.1 Submit one legible copy, in approved transferrable media, of a report listing results of 3.3 to the SUPERVISOR. The report shall include certification that all work item requirements have been

SSP: HRMC-010-24 2 of 2 ITEM NO: 593-11-001 completed.

3.3.2 Upon notification by the SUPERVISOR, reinstall and secure the manhole covers to tank listed in 1.2. Use New fasteners and gaskets.

3.4 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 New materials required to satisfy the work item requirements are known to have a long lead time.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

SHIP: YRBM 32 (YRBM 13204) ITEM NO: 593-11-002

COAR: 16 PCN: SERV-L124

SSP: HRMC-010-24 1 of 3 ITEM NO: 593-11-002

1.1 Title: Collection Holding Tank (CHT) Routine Maintenance and Preservation; accomplish

1.2 Location of Work:

1.2.1 CHT Tank

1.2.2 CHT Pump Room (2-2-1-W)

1.3 Identification:

1.3.1 Quantity (One EA): Overflow Strainer (F-37) of 2.4 and 2.5

1.3.2 Quantity (8 EA): Tank Level Indicator (TLI) Sensor, Model: AA Spec 12051, Brand: Granzow Inc, including all associated hardware and gaskets.

1.3.3 Quantity (One EA.): Tank Washing Nozzle (F-271)

2. REFERENCES:

2.1 Standard Items, (FY-24) CH-1

2.2 DOL, OSHA STD 29 CFR 1915, Control of Explosives and Other Dangerous Atmospheres

2.3 S9086-T8-STM-010/CH-593, Pollution Control

2.4 528-5478276 Rev F, Sewage Tank

2.5 528-5478272, Plumbing Drains & Vents

2.6 MIL-PRF-1149 , MIL-PRF-1149 Specification Performance of Rubber Products.

3. REQUIREMENTS:

3.1 Accomplish the requirements of 009-88 of 2.1.

3.1.1 Upon notification by the SUPERVISOR, open the manhole covers to tank listed in 1.2. Ensure Marine Chemist provides Gas Free service to tanks,required spaces and entry posting for service/work.

3.2 Accomplish the requirements of 009-09 of 2.1.

3.3 Accomplish the cleaning of CHT Tank located in 1.2.2

3.3.1 Upon completion of cleaning, accomplish an inspection of 100% of CHT tank interior.

3.3.2 Submit one legible copy, in approved transferrable media, of a report listing the results of 3.3.1 to the SUPERVISOR within 24 hours of completed inspection. Report shall include at a minimum, overall tank condition, signs of corrosion, conditions of welded seams.

3.3.3 Remove & install new one ea. strainer listed in 1.3.1 IAW Ref.

#2.4 and 2.5 located in 1.2.2 immediately following restoration of new strainer remove & install new, 4 ea. CHT floats listed in 1.3.2 IAW Ref. #2.4 and 2.5 located in 1.2.2 using new associated hardware

SSP: HRMC-010-24 2 of 3 ITEM NO: 593-11-002 and gaskets.

3.3.4 Remove existing and install new One each tank washing nozzle listed in 1.3.3 located in 1.2.1.

3.3.5 Accomplish the requirements of 009-32 of 2.1 including Table 4, Line 15, Column A, B, and C for 100% of CHT tank interior.

3.3.5.1 Contractor to coordinate and commercially dispose of the abrasive blast grit used in 3.3.4.

3.3.5.2 Accomplish the removal of existing and installation of new equipment listed in 1.3.2 and in accordance with 2.5.

3.3.5.3 Ensure newly exposed flange faces are smooth and flush prior to the installation of equipment listed in 1.3.2. Install new gaskets.

(V)(G) ""OPERATIONAL TEST""

3.4 Accomplish an operational test of the equipment listed in 1.3.2 and 1.3.3, using 2.4 and 2.5 for guidance using fresh water.

3.4.1 Ensure proper operation of all associated alarms located throughout CHT Room, Main Deck and Quarterdeck.

3.4.2 Submit one legible copy, in approved transferrable media, of a report listing the results of 3.4 and 3.4.1 to the SUPERVISOR.

3.5 Upon notification by the SUPERVISOR, reinstall and secure the manhole covers to tank listed in 1.2. Use New fasteners and gaskets.

3.5.1 Install new gaskets conforming to MIL-PRF-1149.

3.5.1.1 Coordinate the sampling and lab analysis of waste water and/or sludge via the SUPERVISOR. Upon receipt of satisfactory lab analysis, contractor to commercially dispose of waste water and/or sludge generated.

3.6 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

3.7 Procure and provide to Barge and Messing Group Quantity (4 EA), Level Control Sensor (F-31) for continuous maintenance as required. New materials required to satisfy the work item requirements are known to have a long lead time.

4. NOTES:

4.1 Contractor to make note of bolt hole orientation of existing level control sensor flanges prior to procuring new.

5. GOVERNMENT FURNISHED MATERIAL(GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

SSP: HRMC-010-24 3 of 3 ITEM NO: 593-11-002

SHIP: YRBM 32 (YRBM 13204) ITEM NO: 624-12-001

COAR: 16 PCN: SERV-L112

SSP: HRMC-010-24 1 of 2 ITEM NO: 624-12-001

1.1 Title: Rolling Grill; replace

1.2 Location of Work:

1.2.1 SHIP'S STORE, 1-10-2-Q Portside Main Deck

1.3 Identification:

1.3.1 Quantity (One EA), Rolling Grill Assembly, 7 Feet 1 inch wide by 6 feet 3 inches High. Rolling Grill, CRES, Kinnear Model FMG Push Up.

2. REFERENCES:

2.1 Standard Items, FY-24,CH-1

2.2 625-5478302 Rev D, DET. 22-F, ITEM #13.

3. REQUIREMENTS:

3.1 Remove existing and install new, One each rolling grill Item 13 of 2.2, located in 1.2.1, using 2.2, and manufacturer's instructions for guidance. Order replacement rolling grill as LLTM and provide Supervisor with timeline to receive new rolling grill.

3.1.1 Chip and grind each surface in way of roller curtain door assembly removal and replacement.

3.2 Install new rolling grill listed in 1.3.1, at the location listed in 1.2, in accordance with 2.2 and manufacturer's instruction.

3.2.1 Accomplish the requirements of 009-12 of 2.1, and including Table 3, Column A and D, Lines One through 7.

(V)(G) "OPERATIONAL TEST"

3.3 Accomplish an operational test of the new rolling grill through 5 complete cycles. Allowable sticking or binding: None.

3.3.1 Adjust tensioning such that when the new rolling grill is fully open, it shall remain at the top/head and when down/closed, shall stay in the down position.

3.4 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 Order replacement rolling grill as LLTM and provide Supervisor with timeline to receive new rolling grill to support timely schedule completion.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

SSP: HRMC-010-24 2 of 2 ITEM NO: 624-12-001

5.2 PUSH MATERIAL:

1. None.