HP Air Compressor WP22L.pdf
PDF 64 KB Posted
- Attached to
- USNS CODY - SAUER AIR COMPRESSOR Federal contract opportunity
- Solicitation number
- N3220526Q0009
About this file
This is a technical data sheet for the Sauer Compressors USA Model WP 22L air compressor. The compressor is a two-stage, two-cylinder unit with a direct-drive design operating at 1770 rpm and rated for 7.5 horsepower. It features an operation pressure range of 100-580 PSI with a standard pressure relief valve set at 610 PSI, and delivers 15.0 SCFM at 550 PSI fill-up capacity. The unit operates on three-phase electrical power at 440 volts, 60 Hz frequency, with a current draw of 11.5 amperes and generates 87 decibels of noise at one meter.
Standard equipment includes an air intake and silencing filter, intercooler and final recooler, oil and water separator, safety valves after each stage, solenoid valve for automatic separator drainage, splash lubrication, fan flywheel, flexible coupling, resilient mounts with drainage and air outlet hoses, and a NEMA electrical motor size 213T with IP 54/F protection and insulation rating. Additional equipment includes a non-return valve, air pressure switch for automatic start/stop, low oil level shutdown switch, high air temperature shutdown switch, and a compressor control and monitoring unit. The compressor weighs 298 pounds with dimensions of 34 inches length by 24 inches width by 25 inches height, operates with 0.40 gallon oil sump capacity, and requires 765 SCFM cooling air with heat dissipation rated at 27,296 BTU/hour. All capacity data includes a 5 percent tolerance and references ambient conditions of 68°F and 14.6 PSI, with attached drawing B22D6123-A.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SSJ SBS HP Air Compressor Cody Redacted.pdf | ||
| CLS CLAUSES.pdf | ||
| Combined_Synopsis_Solicitation_26Q0009.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA SHEET COMPRESSOR WP 22L
CHARACTERISTICS VALUE UNITS
OPERATION PRESSURE RANGE 100-580 PSI
STANDARD PRESSURE RELIEF VALVE SETTINGS 610 PSI
FLOW (FILL-UP CAPACITY) @ 550 PSI (38 BAR) 15.0 SCFM
REQUIRED POWER 7.5 HP
VOLTAGE 440 V
CURRENT 11.5 A
FREQUENCY 60 Hz
OIL SUMP CAPACITY 0.40 GALLON
WEIGHT 298 LB
OVERALL DIMENSION LxWxH 34x24x25 INCH NOISE 87 dB at 1m SPEED 1770 rpm HEAT DISSIPATION 27296 BTU/h AMBIENT TEMPERATURE UP TO + 41 up to + 140 ° F RESIDUAL OIL CONTENT AT AIR OUTLET < 5 mg/m3
DELTA T AIR DISCHARGE TEMP/AMBIENT 25 ° F
COOLING AIR NEED 765 SCFM
COOLING Air Cooling DRIVE Direct Drive
STAGE/CYLYNDER 2/2
ATTACHED DRAWING B22D6123-A
All capacity data with 5 % tolerance related to ambient conditions of 68 ° F and 14.6 PSI
All capacity data given at maximum operating conditions
Standard Equipment:
- air intake and silencing filter
- intercooler and final recooler
- oil and water separator after the last stage
- safety valve after each stage
- final pressure gauge
- solenoid valve (120 V / 60 Hz) for automatic drainage of the separator
- unloaded starting relief integrated in the condensate drain system
- splash lubrication
- fan flywheel
- flexible coupling
- assembly of compressor and electric motor
- resilient mounts including drainage and air outlet hoses
- three phase, NEMA, electrical motor size 213T:
nominal-rating: 7.5 HP speed: 1770 rpm voltage: 440 V frequency: 60 Hz protection / insulation: IP 54 / F
Additional Equipment for the Compressor Unit:
- one (1) non-return valve (supplied loose)
- one (1) air pressure switch for automatic start/stop (supplied loose)
- one (1) low oil level shutdown switch
- one (1) high air temperature shutdown switch mounted at the air-outlet of the compressor
- one (1) compressor control and monitoring unit (supplied loose)
Test and Certificates:
- work test for the compressor and motor
File details come from the government source that posted it. Updated .