N3220520Q4173.docx

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220520Q4173 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through:

a. Federal Acquisition Circular (FAC) 2020-06, effective 05/06/2020 located on https://www.acquisition.gov/?q=browsefar

b. DFARS Publication Notice 20200324 effective 03/24/2020 located at https://www.acquisition.gov/dfars

4. The associated NAICS code is 811310 and the associated PSC code is J041 for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

|X| is not being set-aside for small businesses.

|_| is being set-aside for The small business size standard is $8 Million.

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

6. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ. The USNS HERSHEL WILLIAMS requires emergent contractor services to provide technical services to repair the Number 2 AC Plant. The period of performance will be on or around July 3rd through July 8th. This is a Fixed Price Contract, see attached SOW (Attachment 1).

7. The required delivery is FOB Destination and acceptance date is July 8, 2020. Delivery and acceptance is in Norfolk, VA.

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial (Deviation 2018-O0018) applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes. Failure of a quote to address any items required in the submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price

2. Total Firm Fixed price

3. Any Discount Terms

4. Estimated time of delivery if different then 1 May 2020.

5. Technical Submission Requirements For a Services buy the quotes shall contain all pre-award submission/certification requirements as defined in the statement of work (SOW).

6. Responses to the solicitation are due on 2 June 2020 at 10AM EST. Quotes may be e-mailed to Michael Rossik, michael.rossik@navy.mil. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote

Primary Point of Contact: Michael Rossik, michael.rossik@navy.mil (757)443-5873

The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

9. Provision 52.212-2 Evaluation—Commercial Items applies to this acquisition.

(a) The Government may award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror in LPTA solicitations.

To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met. The offeror shall have experience working with Marine Air Conditioning Units and specifically Carrier 30HXS136ZY-671KA. Offeror must be capable of providing OEM replacement parts only.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror by the Government within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

10. All Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items (Mar 2020) with its offer.

11. Clause 52.212-4 Contract Terms and Conditions – Commercial items, applies to this acquisition.

Offers/quotes submitted in response to this solicitation shall not contain nor be subject to the offeror's/vendor's standard commercial terms and conditions. Any offer/quote submitted in response to this solicitation which includes the offeror's/vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

12. Clause 52.212-5 Contract Terms and Conditions required to implement Statutes or Executive Orders- Commercial Items (Mar 2020), applies to this acquisition along with the following FAR Clauses cited below:

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

_X_ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Mar 2020) (15 U.S.C. 632(a)(2)).

_X_ (27) 52.222-3, Convict Labor (June 2003) (E.O.11755).

_X_ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (30) (i) 52.222-26, Equal Opportunity (Sept 2016) (E.O.11246).

_X_ (31) (i) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

_X_ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C.793).

_X_ (33) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

_X_ (35) (i) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O. 13627).

_X_ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

_X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

_X_ (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).

_X_ (61) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

_X_ (2) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

_X_ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_X_ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

X_ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(End of Clause)

13. The following additional information is applicable to this acquisition:

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/content/regulations

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/content/regulations

(End of clause)

52.252-5 Authorized Deviations in Provisions.

As prescribed in 52.107(e), insert the following provision in solicitations that include any FAR or supplemental provision with an authorized deviation. Whenever any FAR or supplemental provision is used with an authorized deviation, the contracting officer shall identify it by the same number, title, and date assigned to the provision when it is used without deviation, include regulation name for any supplemental provision, except that the contracting officer shall insert “(DEVIATION)” after the date of the provision.

Authorized Deviations in Provisions (Apr 1984)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the provision.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions.

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Commercial Invoice

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Commercial Invoice

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Issue By DoDAAC

Admin DoDAAC**

Inspect By DoDAAC

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

MSCHQ_WAWF@NAVY.MIL

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed. (End of clause) Additional MSC Instructions:

Enterprise-Wide Contractor Manpower Reporting Application (ECMRA)

The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Military Sealift Command via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities

(3) Y, Construction of Structures and Facilities;

(4) D, Automatic Data Processing and Telecommunications, IT and Telecom- Telecommunications Transmission (D304) and Internet (D322) ONLY;

(5) S, Utilities ONLY; and

(6) V, Freight and Shipping ONLY.

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

(End Text)

MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS (AUG 2012)

The information contained in this instruction is supplemental to DFARS 252.232-7006.

The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction apply only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract.

When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, "Leave Blank."

In some situations, the WAWF system will pre-populate the "Pay DoDAAC," "Admin By DoDAAC" and "Issue By DoDAAC." The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s).

If Receiving Reports are required, ensure that the "Inspection" and "Acceptance" defaults of "destination" for both fields are not changed in the WAWF online interface.

The CLINs on the WAWF invoice shall be entered exactly as set forth in the contract document including CLIN number (e.g. 0001), Quantity (may be adjusted for actual quantity or dollar value delivered and invoiced), and Unit Price (e.g. $1.00). The dollar amounts on each CLIN or SubCLIN on the WAWF invoice shall reflect final performance values, but in no instance can the dollar amount for each CLIN or SubCLIN exceed what is specified in the contract document. The Contractor shall bill to the lowest level, e.g., the SubCLIN level. The Quantity and Unit of Measure fields must be filled out exactly as indicated in the CLINs and SubCLINs to reduce the possibility of the invoice being delayed or rejected during processing.

Before closing out of an invoice session in WAWF, but after submitting the document or documents, the Contractor will be given the option to send additional email notifications by clicking on the "Send More Email Notifications" link that appears on the page. The Contractor shall click on this link and add the Technical Point of Contact's (TPOC) or Contracting Officer's Representative's (COR) email address in the first email address block and add any other additional email addresses desired in the following blocks. This additional notification to the Government is important to ensure the acceptor/receiver is aware that the invoice documents have been submitted into the WAWF system.

SHIP & BASE ACCESS

Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using “Request a Read Receipt” function and to confirm receipt of facsimile transmissions.

Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically, the following permissions are required:

1. El Paso Intelligence Center (EPIC) personnel screening requirement

2. Base/Repair Facility Access Request

3. Vehicle Access Request

4. Ship Access List (vendor-provided)

All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on “Contracts” in the upper right corner. “EPIC template” is under “Reference” subheading. Click on “Online Library of Common Documents” for all other forms.

EPIC: Required for access to MSC vessels. Complete the MSC/EPIC Force Protection Request Submission Template (Non-Mariner Maintenance Contractor (Rev 8(v4) – 20 September 2017) strictly adhering to format requirements. Screening requests for personnel requiring access will be submitted by their parent company via AMRDEC SAFE, https://safe.amrdec.army.mil/safe to the following MSC personnel

PM1, 4, 6, 7, and 8: joanne.kim.ctr@navy.mil david.laden.ctr@navy.mil francis.lacerna.ctr@navy.mil

EPIC personnel screening requests are required to be submitted no less than four (4) working days prior to performance start date. MSC DET EPIC processes requests in the order they are received. (NOTE: Normal work days for personnel involved in the EPIC Screening process are Monday-Friday.) In the event accelerated processing is required, the PM POC should contact the MSC EPIC Program Manager, Pete Lewis (peter.j.lewis@navy.mil) as soon as the requirement is known with justification for the accelerated processing. Subsequently, appropriate direction will be provided to MSC DET EPIC. Vendor will be notified by MSC of personnel who are denied access to the vessel.

Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer.

Defense Biometric Identification System (DBIDS) is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico (replaces RapidGate). Vendor is responsible to acquire DBIDS credentials prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at https://www.cnic.navy.mil/om/dbids.html. DBIDS credentials require (in succession) (1) Present a letter or official document from the Government sponsoring organization that provides the purpose for your access, (2) Present valid identification, such as a passport or Real ID Act-compliant state driver's license, (3) Present a completed copy of the SECNAV 5512/1 form to obtain your background check,

(4) Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments, and

(5) After all of this is done, the contractor will be provided with the DBDIS credential. For vendors with existing Navy Commercial Access Control System (NCACS) cards, see https://www.cnic.navy.mil/om/dbids.html for instructions to obtain DBIDS credentials. Vendor is responsible to confirm that each employee held DBIDS credentials are active for the specific facility and performance period in accordance with DBIDS.

Additional access permissions may be required in the future.

Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms.

Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.

14. This solicitation does not have a Defense Priorities and Allocation System (DPAS) rating.

15. Quotes may be e-mailed directly to Michael Rossik at michael.rossik@navy.mil the sole designated E-mail address and inbox for receipt of E-mail submissions. No other electronic means of submission, used in whole or in combination with E-mail, is permitted. No other method of submission is acceptable.

E-mail quotes shall be in either Adobe or Microsoft Office format. Quoters are advised that the Government may be unable to receive other types of electronic files (e.g., .zip files) or files in excess of 20 megabytes. To be timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission.

Access to the Naval Base and MSC offices is restricted. Quoters, couriers, and delivery services may encounter unpredictable and lengthy delays or denied access when attempting to enter that facility. Similarly, mailed and emailed quotes may encounter unpredictable and lengthy routing delays. In all cases, quoters are responsible for the risks associated with the chosen delivery method and for ensuring the Government receives the complete quote at the appropriate designated location prior to the due date and time for quote submission.

For additional information regarding this solicitation contact Michael Rossik at michael.rossik@navy.mil

Statement of Work attached below.

Attachment 1 – Statement of Work

1. SCOPE OF WORK:

0. Provide technical services of a field service technician to affect repairs to NR2 AC Plant and restore to full working order.

0. References:

1. 803-7081122 General Technical Requirements

1. SPECIFIC TASKS:

1. The Contractor shall:

1. Provide the technical services of a field service representative to remove and replace with new the compressor main contactor (1M contactor), the wiring and connector for J9 on the CCM board, and the A1 compressor.

1. Return the unit to operational status.

1. Prove successful operation of the NR2 AC plant in the presence of the Chief Engineer or MSCREP.

1. DELIVERABLES:

2. The Contractor shall:

0. Provide an electronic service report which details all work performed on the vessel during the period of performance. Condition report should reflect the condition that the unit was prior to the start of work, the total work done to the unit, and the end state. Copies of the service report shall be provided to the MSC PPE, Chief Engineer, and Master.

1. DELIVERABLES SCHEDULE:

1. PERFORMANCE LOCATION: Naval Station Norfolk, Norfolk, VA

1. PERFORMANCE PERIOD: July 3 – July 8, 2020

1. TECHNICAL POINT OF CONTACTS:

Jared Barker (PPE): CELL: 404-450-9949 EMAIL: jared.barker@navy.mil Joe Clark (ESB TYPE DESK): CELL: 757-469-5676 EMAIL: joseph.m.clark5@navy.mil William Hanlon (CHIEF ENGINEER): EMAIL: william.f.hanlon.civ@hershel-williams.navy.mil

1. ADDITIONAL INFORMATION:

7. Contractor is responsible for gaining access to DOD Facilities. DBIDS process is utilized onboard Naval Station Norfolk and information concerning access can be found at www.cnic.navy.mil/om/dbids.html

7. Contractor shall coordinate vessel access with PPE.

7. The ship’s force will provide access to any required spaces.

7. Contractor may submit invoice for payment once all deliverable have been receipted as per Paragraphs 3.0 and 4.0.

Attachment 2 – Wage Determination

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4341

Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 12/23/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: North Carolina Virginia

Area: North Carolina Counties of Currituck Gates

Virginia Counties of Chesapeake Gloucester Hampton Isle of Wight James City Mathews Newport News Norfolk Poquoson Portsmouth Suffolk Virginia Beach Williamsburg York

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.87 01012 - Accounting Clerk II 16.69 01013 - Accounting Clerk III 18.68 01020 - Administrative Assistant 25.61 01035 - Court Reporter 20.70 01041 - Customer Service Representative I 11.79 01042 - Customer Service Representative II 13.27 01043 - Customer Service Representative III 14.47 01051 - Data Entry Operator I 13.29 01052 - Data Entry Operator II 14.50 01060 - Dispatcher Motor Vehicle 18.91 01070 - Document Preparation Clerk 14.21 01090 - Duplicating Machine Operator 14.21 01111 - General Clerk I 12.42 01112 - General Clerk II 13.78 01113 - General Clerk III 15.47 01120 - Housing Referral Assistant 19.51 01141 - Messenger Courier 14.07 01191 - Order Clerk I 15.44 01192 - Order Clerk II 17.61 01261 - Personnel Assistant (Employment) I 16.22 01262 - Personnel Assistant (Employment) II 18.14 01263 - Personnel Assistant (Employment) III 20.23 01270 - Production Control Clerk 28.37 01290 - Rental Clerk 14.15 01300 - Scheduler Maintenance 15.65 01311 - Secretary I 15.65 01312 - Secretary II 17.51 01313 - Secretary III 19.51 01320 - Service Order Dispatcher 16.90 01410 - Supply Technician 25.61 01420 - Survey Worker 14.75 01460 - Switchboard Operator/Receptionist 13.12 01531 - Travel Clerk I 14.77 01532 - Travel Clerk II 15.77 01533 - Travel Clerk III 16.72 01611 - Word Processor I 14.84 01612 - Word Processor II 16.67 01613 - Word Processor III 18.65

05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 25.82 05010 - Automotive Electrician 21.33 05040 - Automotive Glass Installer 20.22 05070 - Automotive Worker 20.22 05110 - Mobile Equipment Servicer 18.23 05130 - Motor Equipment Metal Mechanic 22.39 05160 - Motor Equipment Metal Worker 20.22 05190 - Motor Vehicle Mechanic 22.39 05220 - Motor Vehicle Mechanic Helper 17.17 05250 - Motor Vehicle Upholstery Worker 19.21 05280 - Motor Vehicle Wrecker 20.22 05310 - Painter Automotive 21.33 05340 - Radiator Repair Specialist 20.22 05370 - Tire Repairer 13.84 05400 - Transmission Repair Specialist 22.39

07000 - Food Preparation And Service Occupations 07010 - Baker 12.60 07041 - Cook I 13.74 07042 - Cook II 15.24 07070 - Dishwasher 9.12 07130 - Food Service Worker 10.29 07210 - Meat Cutter 17.87 07260 - Waiter/Waitress 11.05

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.23 09040 - Furniture Handler 14.67 09080 - Furniture Refinisher 21.23 09090 - Furniture Refinisher Helper 15.80 09110 - Furniture Repairer Minor 17.62 09130 - Upholsterer 20.17

11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.41 11060 - Elevator Operator 11.92 11090 - Gardener 15.60 11122 - Housekeeping Aide 11.92 11150 - Janitor 11.92 11210 - Laborer Grounds Maintenance 13.01 11240 - Maid or Houseman 9.78 11260 - Pruner 12.04 11270 - Tractor Operator 14.70 11330 - Trail Maintenance Worker 13.01 11360 - Window Cleaner 12.64

12000 - Health Occupations 12010 - Ambulance Driver 16.84 12011 - Breath Alcohol Technician 16.99 12012 - Certified Occupational Therapist Assistant 30.26 12015 - Certified Physical Therapist Assistant 28.62 12020 - Dental Assistant 18.88 12025 - Dental Hygienist 35.86 12030 - EKG Technician 29.13 12035 - Electroneurodiagnostic Technologist 29.13 12040 - Emergency Medical Technician 16.84 12071 - Licensed Practical Nurse I 16.04 12072 - Licensed Practical Nurse II 17.95 12073 - Licensed Practical Nurse III 20.00 12100 - Medical Assistant 14.95 12130 - Medical Laboratory Technician 22.63 12160 - Medical Record Clerk 15.85 12190 - Medical Record Technician 17.74 12195 - Medical Transcriptionist 16.73 12210 - Nuclear Medicine Technologist 34.61 12221 - Nursing Assistant I 11.33 12222 - Nursing Assistant II 12.73 12223 - Nursing Assistant III 13.89 12224 - Nursing Assistant IV 15.59 12235 - Optical Dispenser 22.35 12236 - Optical Technician 18.25 12250 - Pharmacy Technician 17.33 12280 - Phlebotomist 16.34 12305 - Radiologic Technologist 27.28 12311 - Registered Nurse I 24.37 12312 - Registered Nurse II 29.81 12313 - Registered Nurse II Specialist 29.81 12314 - Registered Nurse III 36.07 12315 - Registered Nurse III Anesthetist 36.07 12316 - Registered Nurse IV 43.23 12317 - Scheduler (Drug and Alcohol Testing) 22.23 12320 - Substance Abuse Treatment Counselor 23.71

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.46 13012 - Exhibits Specialist II 25.36 13013 - Exhibits Specialist III 29.19 13041 - Illustrator I 21.91 13042 - Illustrator II 27.02 13043 - Illustrator III 32.78 13047 - Librarian 32.67 13050 - Library Aide/Clerk 13.04 13054 - Library Information Technology Systems 26.20 Administrator 13058 - Library Technician 16.78 13061 - Media Specialist I 20.45 13062 - Media Specialist II 22.87 13063 - Media Specialist III 25.49 13071 - Photographer I 13.93 13072 - Photographer II 20.31 13073 - Photographer III 24.67 13074 - Photographer IV 27.39 13075 - Photographer V 31.46 13090 - Technical Order Library Clerk 16.38 13110 - Video Teleconference Technician 20.16

14000 - Information Technology Occupations 14041 - Computer Operator I 15.56 14042 - Computer Operator II 17.40 14043 - Computer Operator III 19.41 14044 - Computer Operator IV 21.57 14045 - Computer Operator V 23.88 14071 - Computer Programmer I (see 1) 22.93 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.56 14160 - Personal Computer Support Technician 21.57 14170 - System Support Specialist 27.64

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.24 15020 - Aircrew Training Devices Instructor (Rated) 40.21 15030 - Air Crew Training Devices Instructor (Pilot) 48.04 15050 - Computer Based Training Specialist / Instructor 33.24 15060 - Educational Technologist 35.09 15070 - Flight Instructor (Pilot) 48.04 15080 - Graphic Artist 24.28 15085 - Maintenance Test Pilot Fixed Jet/Prop 39.14 15086 - Maintenance Test Pilot Rotary Wing 39.14 15088 - Non-Maintenance Test/Co-Pilot 39.14 15090 - Technical Instructor 25.94 15095 - Technical Instructor/Course Developer 31.73 15110 - Test Proctor 20.94 15120 - Tutor 20.94

16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.35 16030 - Counter Attendant 9.35 16040 - Dry Cleaner 11.99 16070 - Finisher Flatwork Machine 9.35 16090 - Presser Hand 9.35 16110 - Presser Machine Drycleaning 9.35 16130 - Presser Machine Shirts 9.35 16160 - Presser Machine Wearing Apparel Laundry 9.35 16190 - Sewing Machine Operator 12.85 16220 - Tailor 13.77 16250 - Washer Machine 10.23

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.50 19040 - Tool And Die Maker 29.34

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.49 21030 - Material Coordinator 28.37 21040 - Material Expediter 28.37 21050 - Material Handling Laborer 12.63 21071 - Order Filler 12.57 21080 - Production Line Worker (Food Processing) 19.49 21110 - Shipping Packer 16.50 21130 - Shipping/Receiving Clerk 16.50 21140 - Store Worker I 13.50 21150 - Stock Clerk 17.08 21210 - Tools And Parts Attendant 19.49 21410 - Warehouse Specialist 19.49

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 33.98 23019 - Aircraft Logs and Records Technician 27.78 23021 - Aircraft Mechanic I 32.37 23022 - Aircraft Mechanic II 33.98 23023 - Aircraft Mechanic III 35.57 23040 - Aircraft Mechanic Helper 24.83 23050 - Aircraft Painter 30.84 23060 - Aircraft Servicer 27.78 23070 - Aircraft Survival Flight Equipment Technician 30.84 23080 - Aircraft Worker 29.23 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 29.23 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 32.37

II

23110 - Appliance Mechanic 19.24 23120 - Bicycle Repairer 21.03 23125 - Cable Splicer 28.38 23130 - Carpenter Maintenance 20.83 23140 - Carpet Layer 23.32 23160 - Electrician Maintenance 23.77 23181 - Electronics Technician Maintenance I 24.29 23182 - Electronics Technician Maintenance II 25.63 23183 - Electronics Technician Maintenance III 26.90 23260 - Fabric Worker 22.17 23290 - Fire Alarm System Mechanic 21.51 23310 - Fire Extinguisher Repairer 21.03 23311 - Fuel Distribution System Mechanic 30.24 23312 - Fuel Distribution System Operator 24.64 23370 - General Maintenance Worker 18.30 23380 - Ground Support Equipment Mechanic 32.37 23381 - Ground Support Equipment Servicer 27.78 23382 - Ground Support Equipment Worker 29.23 23391 - Gunsmith I 21.03 23392 - Gunsmith II 23.32 23393 - Gunsmith III 25.83 23410 - Heating Ventilation And Air-Conditioning 23.92 Mechanic 23411 - Heating Ventilation And Air Contidioning 25.11 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 24.92 23440 - Heavy Equipment Operator 20.20 23460 - Instrument Mechanic 27.39 23465 - Laboratory/Shelter Mechanic 18.15 23470 - Laborer 12.63 23510 - Locksmith 23.94 23530 - Machinery Maintenance Mechanic 25.63 23550 - Machinist Maintenance 25.31 23580 - Maintenance Trades Helper 16.29 23591 - Metrology Technician I 27.39 23592 - Metrology Technician II 28.75 23593 - Metrology Technician III 30.10 23640 - Millwright 27.56 23710 - Office Appliance Repairer 25.03 23760 - Painter Maintenance 20.11 23790 - Pipefitter Maintenance 24.18 23810 - Plumber Maintenance 23.04 23820 - Pneudraulic Systems Mechanic 25.83 23850 - Rigger 25.83 23870 - Scale Mechanic 23.32 23890 - Sheet-Metal Worker Maintenance 25.57 23910 - Small Engine Mechanic 20.11 23931 - Telecommunications Mechanic I 29.09 23932 - Telecommunications Mechanic II 30.54 23950 - Telephone Lineman 31.45 23960 - Welder Combination Maintenance 24.51 23965 - Well Driller 25.83 23970 - Woodcraft Worker 25.83 23980 - Woodworker 21.03

24000 - Personal Needs Occupations 24550 - Case Manager 14.34 24570 - Child Care Attendant 9.99 24580 - Child Care Center Clerk 13.48 24610 - Chore Aide 9.29 24620 - Family Readiness And Support Services 14.34 Coordinator 24630 - Homemaker 14.34

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.86 25040 - Sewage Plant Operator 20.85 25070 - Stationary Engineer 24.86 25190 - Ventilation Equipment Tender 19.08 25210 - Water Treatment Plant Operator 20.85

27000 - Protective Service Occupations 27004 - Alarm Monitor 18.40 27007 - Baggage Inspector 14.76 27008 - Corrections Officer 20.02 27010 - Court Security Officer 21.65 27030 - Detection Dog Handler 16.52 27040 - Detention Officer 20.02 27070 - Firefighter 23.28 27101 - Guard I 14.76 27102 - Guard II 16.52 27131 - Police Officer I 22.35 27132 - Police Officer II 24.84

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.13 28042 - Carnival Equipment Repairer 11.81 28043 - Carnival Worker 9.04 28210 - Gate Attendant/Gate Tender 14.30 28310 - Lifeguard 12.22 28350 - Park Attendant (Aide) 15.60 28510 - Recreation Aide/Health Facility Attendant 11.68 28515 - Recreation Specialist 19.83 28630 - Sports Official 12.75 28690 - Swimming Pool Operator 15.63

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.82 29020 - Hatch Tender 26.82 29030 - Line Handler 26.82 29041 - Stevedore I 25.49 29042 - Stevedore II 28.29

30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 38.78 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 26.74 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45 30021 - Archeological Technician I 18.85 30022 - Archeological Technician II 21.09 30023 - Archeological Technician III 25.14 30030 - Cartographic Technician 26.68 30040 - Civil Engineering Technician 28.34 30051 - Cryogenic Technician I 25.67 30052 - Cryogenic Technician II 28.36 30061 - Drafter/CAD Operator I 18.85 30062 - Drafter/CAD Operator II 21.09 30063 - Drafter/CAD Operator III 23.52 30064 - Drafter/CAD Operator IV 28.93 30081 - Engineering Technician I 17.82 30082 - Engineering Technician II 19.79 30083 - Engineering Technician III 22.59 30084 - Engineering Technician IV 27.42 30085 - Engineering Technician V 33.54 30086 - Engineering Technician VI 40.58 30090 - Environmental Technician 24.06 30095 - Evidence Control Specialist 22.05 30210 - Laboratory Technician 21.99 30221 - Latent Fingerprint Technician I 24.47 30222 - Latent Fingerprint Technician II 27.02 30240 - Mathematical Technician 26.68 30361 - Paralegal/Legal Assistant I 18.72 30362 - Paralegal/Legal Assistant II 23.19 30363 - Paralegal/Legal Assistant III 28.38 30364 - Paralegal/Legal Assistant IV 34.32 30375 - Petroleum Supply Specialist 26.97 30390 - Photo-Optics Technician 26.68 30395 - Radiation Control Technician 26.97 30461 - Technical Writer I 24.00 30462 - Technical Writer II 29.36 30463 - Technical Writer III 35.52 30491 - Unexploded Ordnance (UXO) Technician I 24.65 30492 - Unexploded Ordnance (UXO) Technician II 29.82 30493 - Unexploded Ordnance (UXO) Technician III 35.74 30494 - Unexploded (UXO) Safety Escort 24.65 30495 - Unexploded (UXO) Sweep Personnel 24.65 30501 - Weather Forecaster I 28.02 30502 - Weather Forecaster II 30.99 30620 - Weather Observer Combined Upper Air Or (see 2) 23.52 Surface Programs 30621 - Weather Observer Senior (see 2) 25.48 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.82 31020 - Bus Aide 14.46 31030 - Bus Driver 18.27 31043 - Driver Courier 13.40 31260 - Parking and Lot Attendant 10.66 31290 - Shuttle Bus Driver 14.22 31310 - Taxi Driver 12.65 31361 - Truckdriver Light 14.22 31362 - Truckdriver Medium 15.59 31363 - Truckdriver Heavy 18.75 31364 - Truckdriver Tractor-Trailer 18.75 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.54 99030 - Cashier 9.20 99050 - Desk Clerk 9.92 99095 - Embalmer 30.76 99130 - Flight Follower 24.65 99251 - Laboratory Animal Caretaker I 13.04 99252 - Laboratory Animal Caretaker II 13.84 99260 - Marketing Analyst 28.59 99310 - Mortician 30.76 99410 - Pest Controller 17.48 99510 - Photofinishing Worker 12.53 99710 - Recycling Laborer 19.23 99711 - Recycling Specialist 21.72 99730 - Refuse Collector 17.64 99810 - Sales Clerk 11.04 99820 - School Crossing Guard 15.63 99830 - Survey Party Chief 21.69 99831 - Surveying Aide 13.54 99832 - Surveying Technician 19.72 99840 - Vending Machine Attendant 16.41 99841 - Vending Machine Repairer 19.31 99842 - Vending Machine Repairer Helper 16.41

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 8 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal…