SYNOPSIS_SOLICITATION_SUNSHADE.docx

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220518Q6583 and is being issued as a Request for Quote (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular {2005-100, effective 22 AUG 2018}, {DPN-20180824}, and {NMCARS-21 MAY 2018

4. The associated NAICS code is 238390 and the associated PSC code is J020 for this procurement and this procurement:

|_| is not being set-aside for small businesses.

|X| is being set-aside for small businesses. The small business size standard is $15.0 M

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options: Note: The requirements of completing the ECMRA shall be included and is Not Separately Priced (NSP).

SERVICES

Labor, material and travel to complete the SOW. Please breakdown each element of your quote for analysis purposes.

EACH

Material. This includes all shipping costs. Please breakdown each element of your quote for analysis purposes.

EACH

6. Statement of Work:

1.0 ABSTRACT

1.1 This item describes the requirement for the contractor to procure and install SOLASAFE anti-glare “SILVER” sunscreens for Navigation Bridge and Helicopter Control Station.

2.0 REFERENCES:

2.1 Solar Solve Technical Data, Solar Solve Website http://www.solasolv.com/index.php

2.2 COMSC Dwg. No. 6976169 Underwater Hull Inspection Guidance Plan

3.0 ITEM LOCATION/DESCRIPTION

3.1 Locations / Quantities

3.1.1 Navigation Bridge (03-17-0)

a. 19 EA

3.1.2 Navigation Bridge Wing Port (03-22-2)

b. 5 EA

3.1.3 Navigation Bridge Wing Stbd (03-22-1)

c. 5 EA

3.1.4 Helicopter Control Station (HCS) (03-53-2)

d. 6 EA

3.2 Item Description / Manufacturer’s Data:

3.2.1 Item Description: See Reference 2.1.1

3.2.2 Manufacturer’s Data

Solar Solve Ltd 3a, Tyne Dock East Side Port of Tyne South Shields Tyne and Wear

NE33 5SQ

Tel: +44 (0) 191 454 8595 Fax: +44 (0) 191 454 8692

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES: None

5.0 NOTES

5.1 Performance Period:

5.1.1 Primary 15 November 2018 – 15 December 2018

5.2 T-EPF LOCATION: Austal Shipyard Vessel Completion Yard, Mobile, Ala.

5.3 Port Engineer:

5.3.1 Jonathan Twiford

Mobile: 757-756-6362 Email: jonathan.twiford1@navy.mil

5.4 Contact the port engineer for details and requirements concerning access to the vessel and access requirement to Austal Shipyard.

5.5 Contractor is required to submit personnel on the EPIC spreadsheet. To gain access to MSC vessel's on the East Coast, contractors must submit an EPIC request to MSFSC(underscore)EPIC(underscore)EAST(at)navy(dot)mil MSFSC_EPIC_EAST@navy.mil.

5.6 Contractors, shall allow 3 business days (14 for Austal, 5 for NASSCO, OCONUS, & Earl NJ) for processing of all requests. EPIC will take up to 48 hrs to process, the request must be approved by EPIC before access can be sent to the facility for approval, access will not be guaranteed without approval from EPIC.

5.7 The contractor and all subcontractors, regardless of tier must consult the General Technical Requirements (GTR) to determine applicability to this work item. In performance of this work item, the contractor and all subcontractors regardless of tier must comply with the requirements of all applicable GTR’s including but not limited to GTR’s 1 through 7, 22, 23, 26, 28 and 29.

5.8 The contractor and subcontractors shall review other work items under this contract, to determine their effect on the work required by this item. Based on this review the contractor shall plan and schedule work to minimize conflicts between all work items.

5.9 Contractor proposal shall include identification of center pull or double pulley bottom rail operation.

6.0 QUALITY ASSURANCE REQUIREMENTS: None Additional.

7.0 STATEMENT OF WORK REQUIRED

7.1 Verify and determine measurements and all sizes of windows identified during Site Survey.

7.1.1 Center two (2) Bridge windows will be covered by one (1) sun screen blind.

7.2 Furnish and install ABS Type Approved Solar Solve LTD, Type SOLASAFE Anti-Glare SILVER Sun Screen Blinds to the manufacturer’s recommended procedure in the locations specified in 3.0. Color SILVER.

7.2.1 All components for operating the Solar Solve system shall be furnished by the contractor.

7.2.2 Sun screens shall include aluminum anodized cassettes with wipe clean brush system and aluminum bottom rail.

7.3 Furnish a final list of materials including the complete list of Sun Shade sizes and final locations.

7.4 Furnish a list of window sizes as per locations in 3.0

7.5 Furnish the combined weight of all material used during execution of this work item.

7.6 Prepare, prime and paint all new and disturbed surfaces to match the surrounding surfaces using contractor furnished coatings. Only approved coating may be used.

8.0 GENERAL REQUIREMENTS: None Additional

7. The required period of performance date is 15 November 2018 – 15 December 2018, the location of services will occur at Austal Shipyard Completion Facility, Mobile, Alabama.

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes if an exception applies in accordance with 52.212-1(f). Failure of a quote to address any items required in the submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Quotes, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), labor hours (straight time and over time) and labor rate(s), material list and cost for each and the part number and travel costs (per diem, rental car, hotel, administrative fees, etc.)

2. Total Firm Fixed price

3. Terms of Express Warranty

4. Any Discount Terms

5. Technical Submission Requirements

a. For a Services buy, the quote shall contain all pre-award submission/certification requirements as defined in the statement of work (SOW).

6. Responses to the solicitation are due 12PM local Eastern Daylight Time on 03 October 2018. Quotes may be e-mailed to Norma Rehbein: norma.rehbein@navy.mil. Please reference the solicitation number on your quote.

Primary Point of Contact: Norma Rehbein: norma.rehbein@navy.mil 757-443-5888 The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

9. Provision 52.212-2 Evaluation—Commercial Items (Oct 2014) applies to this acquisition.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror.

To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

10. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items with its offer. The offeror shall complete only paragraphs (b) of the provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of the provision. The clause may be accessed online via the website contained under FAR 52.252-2 of this solicitation.

11. The clause at FAR 52.212-4, Contract Terms and Conditions – Commercial Items applies to this acquisition and is incorporated by reference.

Offers/quotes submitted in response to this solicitation shall not contain nor be subject to the offeror's/vendor's standard commercial terms and conditions. Any offer/quote submitted in response to this solicitation which includes the offeror's/vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

12. The clause at FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (Jan 2018) applies to this acquisition. In addition to the clauses mandated within FAR 52.212-5, the following additional FAR clauses contained within FAR 52.212-5 are applicable to this acquisition:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

__x_ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

_x__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

_X__ (22) 52.219-28, Post Award Small Business Program Representation (July 2013)(15 U.S.C. 632(a)(2)).

_X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X__ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).

__x_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

__x_ (28) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

__x_ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

__x_ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

__x_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).

__x_ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__x_ (57) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (31 U.S.C. 3332).

_x__ (62) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

_X__ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

_X__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_X__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

_X__ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xii) XX (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

XX (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xvii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xvi) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xvii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xviii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xix) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xx) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause) 13 The following additional FAR and DFARS provisions and clauses are applicable to this acquisition:

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):

http://acquisition.gov/far & http://www.acq.osd.mil/dpap/dars/dfarspgi/current

(End of provision)

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A FELONY CONFICTION UNDER FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that—

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://acquisition.gov/far http://www.acq.osd.mil/dpap/dars/dfarspgi/current (End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s)

COMMERCIAL INVOICE

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand- alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

GOVERNMENT

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code N62387 Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

NOT APPLICABLE

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.MSCHQ_WAWF@NAVY.MIL

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause)

MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS (AUG 2012)

The information contained in this instruction is supplemental to DFARS 252.232-7006.

The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction apply only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract.

When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, "Leave Blank."

In some situations the WAWF system will pre-populate the "Pay DoDAAC," "Admin By DoDAAC" and "Issue By DoDAAC." The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s).

If Receiving Reports are required, ensure that the "Inspection" and "Acceptance" defaults of "destination" for both fields are not changed in the WAWF online interface.

The CLINs on the WAWF invoice shall be entered exactly as set forth in the contract document including CLIN number (e.g. 0001), Quantity (may be adjusted for actual quantity or dollar value delivered and invoiced), and Unit Price (e.g. $1.00). The dollar amounts on each CLIN or SubCLIN on the WAWF invoice shall reflect final performance values, but in no instance can the dollar amount for each CLIN or SubCLIN exceed what is specified in the contract document. The Contractor shall bill to the lowest level, e.g., the SubCLIN level. The Quantity and Unit of Measure fields must be filled out exactly as indicated in the CLINs and SubCLINs to reduce the possibility of the invoice being delayed or rejected during processing.

Before closing out of an invoice session in WAWF, but after submitting the document or documents, the Contractor will be given the option to send additional email notifications by clicking on the "Send More Email Notifications" link that appears on the page. The Contractor shall click on this link and add the Technical Point of Contact's (TPOC) or Contracting Officer's Representative's (COR) email address in the first email address block and add any other additional email addresses desired in the following blocks. This additional notification to the Government is important to ensure the acceptor/receiver is aware that the invoice documents have been submitted into the WAWF system.

SHIP & BASE ACCESS

Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using “Request a Read Receipt” function and to confirm receipt of facsimile transmissions.

Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically, the following permissions are required:

1. El Paso Intelligence Center (EPIC) personnel screening requirement

2. Base/Repair Facility Access Request

3. Vehicle Access Request

4. Ship Access List (vendor-provided)

All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on “Contracts” in the upper right corner. “EPIC template” is under “Reference” subheading. Click on “Online Library of Common Documents” for all other forms.

EPIC: Required for access to MSC vessels. Complete the MSC/EPIC Force Protection Request Submission Template (Non-Mariner Maintenance Contractor (Rev 8(v4) – 20 September 2017) strictly adhering to format requirements. Screening requests for personnel requiring access will be submitted by their parent company via AMRDEC SAFE, PM1, 4, 6, 7, and 8: Joanne.kim.ctr@navy.mil

EPIC personnel screening requests are required to be submitted no less than four (4) working days prior to performance start date. MSC DET EPIC processes requests in the order they are received. (NOTE: Normal work days for personnel involved in the EPIC Screening process are Monday-Friday.) In the event accelerated processing is required, the PM POC should contact the MSC EPIC Program Manager, Pete Lewis (peter.j.lewis@navy.mil) as soon as the requirement is known with justification for the accelerated processing. Subsequently, appropriate direction will be provided to MSC DET EPIC. Vendor will be notified by MSC of personnel who are denied access to the vessel.

Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer.

Defense Biometric Identification System (DBIDS) is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico (replaces RapidGate). Vendor is responsible to acquire DBIDS credentials prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at https://www.cnic.navy.mil/om/dbids.html. DBIDS credentials require (in succession) (1) Present a letter or official document from the Government sponsoring organization that provides the purpose for your access, (2) Present valid identification, such as a passport or Real ID Act-compliant state driver's license, (3) Present a completed copy of the SECNAV 5512/1 form to obtain your background check, (4) Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments, and (5) After all of this is done, the contractor will be provided with the DBDIS credential. For vendors with existing Navy Commercial Access Control System (NCACS) cards, see https://www.cnic.navy.mil/om/dbids.html for instructions to obtain DBIDS credentials. Vendor is responsible to confirm that each employee held DBIDS credentials are active for the specific facility and performance period in accordance with DBIDS.

Additional access permissions may be required in the future.

Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms.

Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.

WOOD PACKAGING MATERIAL (WPM) - ADDITIONAL DELIVERY INSTRUCTIONS

In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.

Enterprise-Wide Contractor Manpower Reporting Application (ECMRA)

The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Military Sealift Command via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

(End Text)

14. This solicitation does not have a Defense Priorities and Allocation System (DPAS) rating.

15. Quotes may be only e-mailed directly to norma.rehbein@navy.mil, the sole designated E-mail address and inbox for receipt of E-mail submissions. No other electronic means of submission, used in whole or in combination with E-mail, is permitted. No other method of submission is acceptable.

E-mail quotes shall be in either Adobe or Microsoft Office format. Quoters are advised that the Government may be unable to receive other types of electronic files (e.g., .zip files) or files in excess of 20 megabytes. To be timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission.

E-mailed quotes may encounter unpredictable and lengthy routing delays. In all cases, quoters are responsible for the risks associated with the delivery method and for ensuring the Government received the complete quote at the appropriate designated E-mail address prior to the due date and time for quote.

16. For additional information regarding this solicitation contact Norma Rehbein at norma.rehbein@navy.mil and/or 757-443-5888.

WAGE DETERMINATION

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4605 Daniel W. Simms Division of | Revision No.: 6 Director Wage Determinations| Date Of Revision: 07/18/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts State: Alabama

Area: Alabama County of Mobile **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.85 01012 - Accounting Clerk II 15.54 01013 - Accounting Clerk III 17.38 01020 - Administrative Assistant 27.17 01035 - Court Reporter 19.76 01041 - Customer Service Representative I 12.41 01042 - Customer Service Representative II 13.96 01043 - Customer Service Representative III 15.23 01051 - Data Entry Operator I 12.67 01052 - Data Entry Operator II 13.82 01060 - Dispatcher, Motor Vehicle 20.65 01070 - Document Preparation Clerk 12.18 01090 - Duplicating Machine Operator 12.18 01111 - General Clerk I 12.22 01112 - General Clerk II 13.33 01113 - General Clerk III 14.96 01120 - Housing Referral Assistant 19.61 01141 - Messenger Courier 12.33 01191 - Order Clerk I 14.93 01192 - Order Clerk II 16.29 01261 - Personnel Assistant (Employment) I 17.24 01262 - Personnel Assistant (Employment) II 20.67 01263 - Personnel Assistant (Employment) III 24.58 01270 - Production Control Clerk 23.85 01290 - Rental Clerk 14.27 01300 - Scheduler, Maintenance 15.73 01311 - Secretary I 15.73 01312 - Secretary II 17.60 01313 - Secretary III 19.61 01320 - Service Order Dispatcher 18.71 01410 - Supply Technician 27.17 01420 - Survey Worker 17.56 01460 - Switchboard Operator/Receptionist 11.67 01531 - Travel Clerk I 12.82 01532 - Travel Clerk II 13.61 01533 - Travel Clerk III 14.27 01611 - Word Processor I 12.68 01612 - Word Processor II 14.27 01613 - Word Processor III 16.83 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 21.02 05010 - Automotive Electrician 18.52 05040 - Automotive Glass Installer 17.26 05070 - Automotive Worker 17.26 05110 - Mobile Equipment Servicer 14.74 05130 - Motor Equipment Metal Mechanic 19.75 05160 - Motor Equipment Metal Worker 17.26 05190 - Motor Vehicle Mechanic 19.75 05220 - Motor Vehicle Mechanic Helper 13.47 05250 - Motor Vehicle Upholstery Worker 15.98 05280 - Motor Vehicle Wrecker 17.26 05310 - Painter, Automotive 18.52 05340 - Radiator Repair Specialist 17.26 05370 - Tire Repairer 11.30 05400 - Transmission Repair Specialist 19.75 07000 - Food Preparation And Service Occupations 07010 - Baker 11.82 07041 - Cook I 9.19 07042 - Cook II 10.42 07070 - Dishwasher 9.31 07130 - Food Service Worker 9.36 07210 - Meat Cutter 22.20 07260 - Waiter/Waitress 8.74 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.89 09040 - Furniture Handler 11.23 09080 - Furniture Refinisher 16.44 09090 - Furniture Refinisher Helper 12.35 09110 - Furniture Repairer, Minor 14.18 09130 - Upholsterer 15.84 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 11.17 11060 - Elevator Operator 11.17 11090 - Gardener 15.74 11122 - Housekeeping Aide 10.03 11150 - Janitor 10.03 11210 - Laborer, Grounds Maintenance 12.14 11240 - Maid or Houseman 8.76 11260 - Pruner 12.90 11270 - Tractor Operator 14.86 11330 - Trail Maintenance Worker 12.14 11360 - Window Cleaner 11.34 12000 - Health Occupations 12010 - Ambulance Driver 14.95 12011 - Breath Alcohol Technician 17.41 12012 - Certified Occupational Therapist Assistant 23.88 12015 - Certified Physical Therapist Assistant 27.17 12020 - Dental Assistant 14.83 12025 - Dental Hygienist 27.40 12030 - EKG Technician 24.95 12035 - Electroneurodiagnostic Technologist 24.95 12040 - Emergency Medical Technician 14.95 12071 - Licensed Practical Nurse I 15.56 12072 - Licensed Practical Nurse II 17.41 12073 - Licensed Practical Nurse III 19.40 12100 - Medical Assistant 12.73 12130 - Medical Laboratory Technician 15.85 12160 - Medical Record Clerk 12.87 12190 - Medical Record Technician 14.40 12195 - Medical Transcriptionist 16.79 12210 - Nuclear Medicine Technologist 31.22 12221 - Nursing Assistant I 10.73 12222 - Nursing Assistant II 12.07 12223 - Nursing Assistant III 13.17 12224 - Nursing Assistant IV 14.78 12235 - Optical Dispenser 15.23 12236 - Optical Technician 15.56 12250 - Pharmacy Technician 14.75 12280 - Phlebotomist 13.43 12305 - Radiologic Technologist 22.76 12311 - Registered Nurse I 21.83 12312 - Registered Nurse II 26.70 12313 - Registered Nurse II, Specialist 26.70 12314 - Registered Nurse III 32.31 12315 - Registered Nurse III, Anesthetist 32.31 12316 - Registered Nurse IV 38.73 12317 - Scheduler (Drug and Alcohol Testing) 21.56 12320 - Substance Abuse Treatment Counselor 19.68 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 19.65 13012 - Exhibits Specialist II 24.34 13013 - Exhibits Specialist III 29.77 13041 - Illustrator I 20.65 13042 - Illustrator II 24.45 13043 - Illustrator III 29.77 13047 - Librarian 26.96 13050 - Library Aide/Clerk 9.31 13054 - Library Information Technology Systems 24.34 Administrator 13058 - Library Technician 14.73 13061 - Media Specialist I 17.56 13062 - Media Specialist II 19.65 13063 - Media Specialist III 21.91 13071 - Photographer I 14.64 13072 - Photographer II 16.34 13073 - Photographer III 20.23 13074 - Photographer IV 24.75 13075 - Photographer V 29.94 13090 - Technical Order Library Clerk 15.74 13110 - Video Teleconference Technician 13.84 14000 - Information Technology Occupations 14041 - Computer Operator I 15.80 14042 - Computer Operator II 16.16 14043 - Computer Operator III 18.02 14044 - Computer Operator IV 20.01 14045 - Computer Operator V 22.18 14071 - Computer Programmer I (see 1) 19.02 14072 - Computer Programmer II (see 1) 23.55 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.80 14160 - Personal Computer Support Technician 20.01 14170 - System Support Specialist 26.81 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.79 15020 - Aircrew Training Devices Instructor (Rated) 33.42 15030 - Air Crew Training Devices Instructor (Pilot) 38.60 15050 - Computer Based Training Specialist / Instructor 27.79 15060 - Educational Technologist 25.23 15070 - Flight Instructor (Pilot) 38.60 15080 - Graphic Artist 20.90 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 38.60 15086 - Maintenance Test Pilot, Rotary Wing 38.60 15088 - Non-Maintenance Test/Co-Pilot 38.60 15090 - Technical Instructor 20.24 15095 - Technical Instructor/Course Developer 24.77 15110 - Test Proctor 16.35 15120 - Tutor 16.35 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.70 16030 - Counter Attendant 9.70 16040 - Dry Cleaner 11.23 16070 - Finisher, Flatwork, Machine 9.70 16090 - Presser, Hand 9.70 16110 - Presser, Machine, Drycleaning 9.70 16130 - Presser, Machine, Shirts 9.70 16160 - Presser, Machine, Wearing Apparel, Laundry 9.70 16190 - Sewing Machine Operator 11.89 16220 - Tailor 12.60 16250 - Washer, Machine 10.13 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 21.53 19040 - Tool And Die Maker 26.59 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.16 21030 - Material Coordinator 23.08 21040 - Material Expediter 23.08 21050 - Material Handling Laborer 12.08 21071 - Order Filler 11.19 21080 - Production Line Worker (Food Processing) 17.16 21110 - Shipping Packer 14.73 21130 - Shipping/Receiving Clerk 14.73 21140 - Store Worker I 11.73 21150 - Stock Clerk 17.12 21210 - Tools And Parts Attendant 17.16 21410 - Warehouse Specialist 17.16 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 21.96 23019 - Aircraft Logs and Records Technician 16.89 23021 - Aircraft Mechanic I 20.87 23022 - Aircraft Mechanic II 21.96 23023 - Aircraft Mechanic III 23.06 23040 - Aircraft Mechanic Helper 14.23 23050 - Aircraft, Painter 19.57 23060 - Aircraft Servicer 16.89 23070 - Aircraft Survival Flight Equipment Technician 19.57 23080 - Aircraft Worker 18.24 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 18.24 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 20.87

II

23110 - Appliance Mechanic 21.53 23120 - Bicycle Repairer 15.04 23125 - Cable Splicer 32.58 23130 - Carpenter, Maintenance 19.22 23140 - Carpet Layer 20.08 23160 - Electrician, Maintenance 22.28 23181 - Electronics Technician Maintenance I 27.62 23182 - Electronics Technician Maintenance II 29.62 23183 - Electronics Technician Maintenance III 31.60 23260 - Fabric Worker 18.59 23290 - Fire Alarm System Mechanic 23.00 23310 - Fire Extinguisher Repairer 17.14 23311 - Fuel Distribution System Mechanic 21.30 23312 - Fuel Distribution System Operator 16.14 23370 - General Maintenance Worker 16.94 23380 - Ground Support Equipment Mechanic 20.87 23381 - Ground Support Equipment Servicer 16.89 23382 - Ground Support Equipment Worker 18.24 23391 - Gunsmith I 17.14 23392 - Gunsmith II 20.08 23393 - Gunsmith III 22.97 23410 - Heating, Ventilation And Air-Conditioning 19.49 Mechanic 23411 - Heating, Ventilation And Air Contidioning 20.51 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.09 23440 - Heavy Equipment Operator 19.45 23460 - Instrument Mechanic 20.79 23465 - Laboratory/Shelter Mechanic 21.53 23470 - Laborer 12.08 23510 - Locksmith 21.08 23530 - Machinery Maintenance Mechanic 27.86 23550 - Machinist, Maintenance 24.38 23580 - Maintenance Trades Helper 12.14 23591 - Metrology Technician I 20.79 23592 - Metrology Technician II 21.88 23593 - Metrology Technician III 22.97 23640 - Millwright 22.58 23710 - Office Appliance Repairer 18.65 23760 - Painter, Maintenance 16.92 23790 - Pipefitter, Maintenance 23.20 23810 - Plumber, Maintenance 21.75 23820 - Pneudraulic Systems Mechanic 22.97 23850 - Rigger 22.97 23870 - Scale Mechanic 20.08 23890 - Sheet-Metal Worker, Maintenance 20.13 23910 - Small Engine Mechanic 17.63 23931 - Telecommunications Mechanic I 26.64 23932 - Telecommunications Mechanic II 28.02 23950 - Telephone Lineman 22.24 23960 - Welder, Combination, Maintenance 22.22 23965 - Well Driller 22.97 23970 - Woodcraft Worker 22.97 23980 - Woodworker 17.14 24000 - Personal Needs Occupations 24550 - Case Manager 13.50 24570 - Child Care Attendant 8.87 24580 - Child Care Center Clerk 12.46 24610 - Chore Aide 9.12 24620 - Family Readiness And Support Services 13.50 Coordinator 24630 - Homemaker 13.50 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.97 25040 - Sewage Plant Operator 21.05 25070 - Stationary Engineer 22.97 25190 - Ventilation Equipment Tender 15.66 25210 - Water Treatment Plant Operator 20.77 27000 - Protective Service Occupations 27004 - Alarm Monitor 14.81 27007 - Baggage Inspector 10.92 27008 - Corrections Officer 17.95 27010 - Court Security Officer 15.97 27030 - Detection Dog Handler 12.39 27040 - Detention Officer 17.95 27070 - Firefighter 13.04 27101 - Guard I 10.92 27102 - Guard II 12.39 27131 - Police Officer I 17.76 27132 - Police Officer II 19.73 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.42 28042 - Carnival Equipment Repairer 13.59 28043 - Carnival Worker 8.94 28210 - Gate Attendant/Gate Tender 14.00 28310 - Lifeguard 11.90 28350 - Park Attendant (Aide) 15.66 28510 - Recreation Aide/Health Facility Attendant 11.43 28515 - Recreation Specialist 17.00 28630 - Sports Official 12.47 28690 - Swimming Pool Operator 16.97 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 25.06 29020 - Hatch Tender 25.06 29030 - Line Handler 25.06 29041 - Stevedore I 23.21 29042 - Stevedore II 26.88…