18Q4038_COMBINED_SYNOPSIS_SOLICITATION.docx

DOCX document 173 KB Posted

Attached to
T-AO Main Engine Parts Class Buy
Solicitation number
N32205-18-Q-4038
Issued by

View the file

Other files

File Type Posted
18Q4038_COMBINED_SYNOPSIS_SOLICITATION.docx DOCX document
Class_J&A_Redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION TEMPLATE

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N32205-18-Q-4038 and is being issued as a Request for Quote (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC 2005-94, Effective 19 Jan 2017).

4. The associated NAICS code is 333618 and this procurement:

|X| is not being set-aside for small businesses.

|_| is being set-aside for. The small business size standard is.

5. Military Sealift Command intends to award on a brand name basis for MAN Diesel-SEMT Pielstick OEM parts in support of the following ten (10) United States Naval Ships (USNS): USNS GUADALUPE (T-AO 200), USNS JOSHUA HUMPHREYS (T-AO 188), USNS LARAMIE (T-AO 203), USNS JOHN LENTHALL (T-AO 189), USNS PATUXENT (T-AO 201), USNS PECOS (T-AO 197), USNS TIPPECANOE (T-AO 199), USNS WALTER S. DIEHL (T-AO 193) USNS JOHN ERICSSON (T-AO 194) and USNS LEROY GRUMMAN (T-AO 195). See attached J&A permitting other than full and open competition for this acquisition.

The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

CLIN
SHIP
Part Number
Description
QTY
0001
LENTHALL
T12619340
12,000 HOUR CYL, INSP. KIT
10
0002
LENTHALL
T600100
MAIN BERAING, PC 2 & 3 (001/1)
6
0003
LENTHALL
T434086
GUIDE, SPRING
10
0004
LENTHALL
T109607
CONROD SMALL END BEARING (003/5)
10
0005
LENTHALL
T212886
CONROD LONG STUD (003/6)
10
0006
LENTHALL
T212885
CONROD SHORT STUD (003/7)
10
0007
LENTHALL
T311947
CONROD STUD BLIND NUTS (DOMED)(003/9)
20
0008
LENTHALL
T217380
CONROD NUT (003/10)
20
0009
LENTHALL
0T25512.028.5
PIN, GROOVE 12 X 28 MM (010/28)
10
0010
LENTHALL
T212336
INTAKE VALVE (014/2)
4
0011
LENTHALL
T011864/T017737
EXHAUST VALVE (015/4)
8
0012
LENTHALL
T210880/T57321
VALVE ROTATORS (015/20)
20
0013
LENTHALL
P417289N
WASHER, PET COCK (019/9)
10
0014
LENTHALL
T210195
EXHAUST ROCKER ARM BUSHING (020/18)
20
0015
LENTHALL
T210194
EXHAUST ROCKER ARM BUSHING (020/19)
20
0016
LENTHALL
T210197
INTAKE ROCKER ARM BUSHING (020/20)
20
0017
LENTHALL
T433491
SHIM LAMINATED (030/9)
10
0018
LENTHALL
T216897
SEAT, VALVE (030/16)
10
0019
LENTHALL
T312092
PIN, VALVE (020/19)
10
0020
LENTHALL
T443055
SPRING, COMPRESSION (020/20)
10
0021
LENTHALL
0N65239.53.68
O-RING (020/37)
20
0022
LENTHALL
T317129
BOLT, HEAD (020/45)
120
0023
LENTHALL
0N65246.53.68
O-RING (020/46)
20
0024
LENTHALL
0N65273.70.68
O-RING (020/72)
10
0025
LENTHALL
0N65258.70.68
O-RING (020/73)
10
0026
LENTHALL
0T65275.70.68
O-RING (020/74)
20
0027
LENTHALL
T12615081
SEAL, OIL LIP90IDX110 ODX12VITON (030/75)
10
0028
LENTHALL
T12615082
SEAL, OIL LIP70IDX110 ODX10VITON (030/76)
10
0029
LENTHALL
0T65130.38.50
GASKET 30X1,5 (030/79)
20
0030
LENTHALL
0N65118.24.50
SEAL, RING 18X1 (030/80)
20
0031
LENTHALL
T446394
BEARING, SHAFT POINTER (030/36)
20
0032
LENTHALL
T106441
TAPPET (030/4A)
10
0033
LENTHALL
T450741
BEARING, ROLLER (030/6)
10
0034
LENTHALL
T312632
SPINDLE (030/7)
10
0035
LENTHALL
T433490
SEAT, TAPPET (030/8)
10
0036
LENTHALL
E156743
BARREL & PLUNGER (030/11)
10
0037
LENTHALL
T442459
COLLAR, SPRING (030/12)
10
0038
LENTHALL
T52899
TWO-PIECE SHIM ASSEMNLY (030/22)
10
0039
LENTHALL
T318013
LINER, ABSORBER (030/29)
10
0040
LENTHALL
T318016
SPRING, (030/33)
10
0041
LENTHALL
T12617101
RING, PISTON 70 ODC2,5 THK (030/39)
20
0042
LENTHALL
0N65244.53.68
O-RING (030/44)
10
0043
LENTHALL
T452210
ORIFICE/DIAPHRAGM (030/32)
10
0044
LENTHALL
T99512107001
BEARING (030/34)
10
0045
LENTHALL
T433569
GASKET , SERRATED RING (030/77)
20
0046
LENTHALL
T433504
PLUG, ANTI SPLASH (030/61)
20
0047
LENTHALL
0T65136.45.50
GASKET, ROUND 36X1,5 (030/78)
20
0048
LENTHALL
T215734
GEAR, RATCHET (030/14)
10
0049
LENTHALL
T211120
RACK (030/28)
10
0050
LENTHALL
T99512105001
BEARING (0330/35)
10
0051
LENTHALL
0N65118.24.50
SEAL, RING 18X1 (030/80)
20
0052
LENTHALL
0N65118.24.40
RING, SEAL 27X1,5 (040/15)
20
0053
LENTHALL
T12618763
GASKET INSPECTION DOOR (038/2)
10
0054
LENTHALL
0T65271.70.63
JW HEADER SPECIAL O-RING (040/9)
20
0055
LENTHALL
T208706
BEARING HALF, UPPER (071/4)
1
0056
LENTHALL
T208705
BEARING HALF, LOWER (071/5)
1
0057
LENTHALL
T12614998
CRANKSHAFT OIL LIP SEAL (073/5)
1
0058
LENTHALL
T12615068
THRUST BEARING SET (083/1&2)
1
0059
LENTHALL
0Y65245.53.63
JW HEADER SPECIAL O-RING (131/26)
20
0060
LENTHALL
0T65238.53.63
JW HEADER SPECIAL O-RING (134/2)
10
0061
LENTHALL
0T66027.36.61
ROCKER LO, O-RING (135/18)
10
0062
LENTHALL
0T66022.31.61
ROCKER LO, O-RING (135/19)
20
0063
LENTHALL
0T65235.53.63
ROCKER LO, O-RING (135/21)
14
0064
LENTHALL
0N65232.53.63
ROCKER LO, O-RING (135/39)
10
0065
LENTHALL
T318014
PISTON, ABSORBER (030/27A)
10
0066
LENTHALL
T313384
SHIM (074/21)
2
0067
LENTHALL
T435607
SPRING (074/8)
24
0068
LENTHALL
T442076
SHIM (074/9)
2
0069
LENTHALL
T9950530794
CAM THRUST ROLLER BEARING (074/10)
4
0070
LENTHALL
0T200.01.0050
CAM THRUST RETAINING RING (074/11)
2
0071
LENTHALL
T609600
CAMSHAFT SHELL BEARING (096/7&8)
22
0072
LENTHALL
0N65229.53.63
O-RING (096/15)
44
0073
LENTHALL
T417019
GASKET (097/2)
4
0074
LENTHALL
T442106
GASKET (097/15)
10
0075
LENTHALL
8886H64455
O-RING (097/5)
4
0076
LENTHALL
T401842
SPRING SET (215/15)
162
0077
LENTHALL
T308807
KEY LONG (052/19)
30
0078
LENTHALL
T402066
KEY SHORT (215/16)
27
0079
HUMPHREYS
T12619340
12,000 HOUR CYL, INSP. KIT
10
0080
HUMPHREYS
T600100
MAIN BERAING, PC 2 & 3 (001/1)
6
0081
HUMPHREYS
T434086
GUIDE, SPRING
10
0082
HUMPHREYS
T109607
CONROD SMALL END BEARING (003/5)
10
0083
HUMPHREYS
T212886
CONROD LONG STUD (003/6)
10
0084
HUMPHREYS
T212885
CONROD SHORT STUD (003/7)
10
0085
HUMPHREYS
T311947
CONROD STUD BLIND NUTS (DOMED)(003/9)
20
0086
HUMPHREYS
T217380
CONROD NUT (003/10)
20
0087
HUMPHREYS
0T25512.028.5
PIN, GROOVE 12 X 28 MM (010/28)
10
0088
HUMPHREYS
T212336
INTAKE VALVE (014/2)
5
0089
HUMPHREYS
T011864/T017737
EXHAUST VALVE (015/4)
10
0090
HUMPHREYS
T210880/T57321
VALVE ROTATORS (015/20)
4
0091
HUMPHREYS
P417289N
WASHER, PET COCK (019/9)
10
0092
HUMPHREYS
T210195
EXHAUST ROCKER ARM BUSHING (020/18)
20
0093
HUMPHREYS
T210194
EXHAUST ROCKER ARM BUSHING (020/19)
20
0094
HUMPHREYS
T210197
INTAKE ROCKER ARM BUSHING (020/20)
20
0095
HUMPHREYS
T433491
SHIM LAMINATED (030/9)
10
0096
HUMPHREYS
T216897
SEAT, VALVE (030/16)
10
0097
HUMPHREYS
T312092
PIN, VALVE (020/19)
10
0098
HUMPHREYS
T443055
SPRING, COMPRESSION (020/20)
10
0099
HUMPHREYS
0N65239.53.68
O-RING (020/37)
20
0100
HUMPHREYS
T317129
BOLT, HEAD (020/45)
120
0101
HUMPHREYS
0N65246.53.68
O-RING (020/46)
20
0102
HUMPHREYS
0N65273.70.68
O-RING (020/72)
10
0103
HUMPHREYS
0N65258.70.68
O-RING (020/73)
10
0104
HUMPHREYS
0T65275.70.68
O-RING (020/74)
20
0105
HUMPHREYS
T12615081
SEAL, OIL LIP90IDX110 ODX12VITON (030/75)
10
0106
HUMPHREYS
T12615082
SEAL, OIL LIP70IDX110 ODX10VITON (030/76)
10
0107
HUMPHREYS
0T65130.38.50
GASKET 30X1,5 (030/79)
20
0108
HUMPHREYS
0N65118.24.50
SEAL, RING 18X1 (030/80)
20
0109
HUMPHREYS
T446394
BEARING, SHAFT POINTER (030/36)
20
0110
HUMPHREYS
T106441
TAPPET (030/4A)
10
0111
HUMPHREYS
T450741
BEARING, ROLLER (030/6)
10
0112
HUMPHREYS
T312632
SPINDLE (030/7)
10
0113
HUMPHREYS
T433490
SEAT, TAPPET (030/8)
10
0114
HUMPHREYS
E156743
BARREL & PLUNGER (030/11)
10
0115
HUMPHREYS
T442459
COLLAR, SPRING (030/12)
10
0116
HUMPHREYS
T52899
TWO-PIECE SHIM ASSEMNLY (030/22)
10
0117
HUMPHREYS
T318013
LINER, ABSORBER (030/29)
10
0118
HUMPHREYS
T318016
SPRING, (030/33)
10
0119
HUMPHREYS
T12617101
RING, PISTON 70 ODC2,5 THK (030/39)
20
0120
HUMPHREYS
0N65244.53.68
O-RING (030/44)
10
0121
HUMPHREYS
T452210
ORIFICE/DIAPHRAGM (030/32)
20
0122
HUMPHREYS
T99512107001
BEARING (030/34)
10
0123
HUMPHREYS
T433569
GASKET , SERRATED RING (030/77)
10
0124
HUMPHREYS
T433504
PLUG, ANTI SPLASH (030/61)
10
0125
HUMPHREYS
0T65136.45.50
GASKET, ROUND 36X1,5 (030/78)
20
0126
HUMPHREYS
T215734
GEAR, RATCHET (030/14)
20
0127
HUMPHREYS
T211120
RACK (030/28)
20
0128
HUMPHREYS
T99512105001
BEARING (0330/35)
10
0129
HUMPHREYS
0N65118.24.50
SEAL, RING 18X1 (030/80)
10
0130
HUMPHREYS
0N65118.24.40
RING, SEAL 27X1,5 (040/15)
10
0131
HUMPHREYS
T12618763
GASKET INSPECTION DOOR (038/2)
20
0132
HUMPHREYS
0T65271.70.63
JW HEADER SPECIAL O-RING (040/9)
20
0133
HUMPHREYS
T208706
BEARING HALF, UPPER (071/4)
10
0134
HUMPHREYS
T208705
BEARING HALF, LOWER (071/5)
20
0135
HUMPHREYS
T12614998
CRANKSHAFT OIL LIP SEAL (073/5)
1
0136
HUMPHREYS
T12615068
THRUST BEARING SET (083/1&2)
1
0137
HUMPHREYS
0Y65245.53.63
JW HEADER SPECIAL O-RING (131/26)
1
0138
HUMPHREYS
0T65238.53.63
JW HEADER SPECIAL O-RING (134/2)
1
0139
HUMPHREYS
0T66027.36.61
ROCKER LO, O-RING (135/18)
20
0140
HUMPHREYS
0T66022.31.61
ROCKER LO, O-RING (135/19)
10
0141
HUMPHREYS
0T65235.53.63
ROCKER LO, O-RING (135/21)
10
0142
HUMPHREYS
0N65232.53.63
ROCKER LO, O-RING (135/39)
20
0143
HUMPHREYS
T318014
PISTON, ABSORBER (030/27A)
14
0144
HUMPHREYS
T313384
SHIM (074/21)
10
0145
HUMPHREYS
T435607
SPRING (074/8)
10
0146
HUMPHREYS
T442076
SHIM (074/9)
2
0147
HUMPHREYS
T9950530794
CAM THRUST ROLLER BEARING (074/10)
4
0148
HUMPHREYS
0T200.01.0050
CAM THRUST RETAINING RING (074/11)
2
0149
HUMPHREYS
T609600
CAMSHAFT SHELL BEARING (096/7&8)
22
0150
HUMPHREYS
0N65229.53.63
O-RING (096/15)
44
0151
HUMPHREYS
T417019
GASKET (097/2)
4
0152
HUMPHREYS
T442106
GASKET (097/15)
10
0153
HUMPHREYS
8886H64455
O-RING (097/5)
4
0154
HUMPHREYS
T401842
SPRING SET (215/15)
162
0155
HUMPHREYS
T308807
KEY LONG (052/19)
30
0156
HUMPHREYS
T402066
KEY SHORT (215/16)
27
0157
ERICSSON
T12619340
12,000 HOUR CYL, INSP. KIT
10
0158
ERICSSON
T600100
MAIN BERAING, PC 2 & 3 (001/1)
6
0159
ERICSSON
T434086
GUIDE, SPRING
10
0160
ERICSSON
T109607
CONROD SMALL END BEARING (003/5)
10
0161
ERICSSON
T212886
CONROD LONG STUD (003/6)
10
0162
ERICSSON
T212885
CONROD SHORT STUD (003/7)
10
0163
ERICSSON
T311947
CONROD STUD BLIND NUTS (DOMED)(003/9)
20
0164
ERICSSON
T217380
CONROD NUT (003/10)
20
0165
ERICSSON
0T25512.028.5
PIN, GROOVE 12 X 28 MM (010/28)
10
0166
ERICSSON
T212336
INTAKE VALVE (014/2)
4
0167
ERICSSON
T011864/T017737
EXHAUST VALVE (015/4)
0168
ERICSSON
T210880/T57321
VALVE ROTATORS (015/20)
4
0169
ERICSSON
P417289N
WASHER, PET COCK (019/9)
10
0170
ERICSSON
T210195
EXHAUST ROCKER ARM BUSHING (020/18)
20
0171
ERICSSON
T210194
EXHAUST ROCKER ARM BUSHING (020/19)
20
0172
ERICSSON
T210197
INTAKE ROCKER ARM BUSHING (020/20)
20
0173
ERICSSON
T433491
SHIM LAMINATED (030/9)
10
0174
ERICSSON
T216897
SEAT, VALVE (030/16)
10
0175
ERICSSON
T312092
PIN, VALVE (020/19)
10
0176
ERICSSON
T443055
SPRING, COMPRESSION (020/20)
10
0177
ERICSSON
0N65239.53.68
O-RING (020/37)
20
0178
ERICSSON
T317129
BOLT, HEAD (020/45)
120
0179
ERICSSON
0N65246.53.68
O-RING (020/46)
20
0180
ERICSSON
0N65273.70.68
O-RING (020/72)
10
0181
ERICSSON
0N65258.70.68
O-RING (020/73)
10
0182
ERICSSON
0T65275.70.68
O-RING (020/74)
20
0183
ERICSSON
T12615081
SEAL, OIL LIP90IDX110 ODX12VITON (030/75)
10
0184
ERICSSON
T12615082
SEAL, OIL LIP70IDX110 ODX10VITON (030/76)
10
0185
ERICSSON
0T65130.38.50
GASKET 30X1,5 (030/79)
20
0186
ERICSSON
0N65118.24.50
SEAL, RING 18X1 (030/80)
20
0187
ERICSSON
T446394
BEARING, SHAFT POINTER (030/36)
20
0188
ERICSSON
T106441
TAPPET (030/4A)
10
0189
ERICSSON
T450741
BEARING, ROLLER (030/6)
10
0190
ERICSSON
T312632
SPINDLE (030/7)
10
0191
ERICSSON
T433490
SEAT, TAPPET (030/8)
10
0192
ERICSSON
E156743
BARREL & PLUNGER (030/11)
10
0193
ERICSSON
T442459
COLLAR, SPRING (030/12)
10
0194
ERICSSON
T52899
TWO-PIECE SHIM ASSEMNLY (030/22)
10
0195
ERICSSON
T318013
LINER, ABSORBER (030/29)
10
0196
ERICSSON
T318016
SPRING, (030/33)
10
0197
ERICSSON
T12617101
RING, PISTON 70 ODC2,5 THK (030/39)
20
0198
ERICSSON
0N65244.53.68
O-RING (030/44)
10
0199
ERICSSON
T452210
ORIFICE/DIAPHRAGM (030/32)
10
0200
ERICSSON
T99512107001
BEARING (030/34)
10
0201
ERICSSON
T433569
GASKET , SERRATED RING (030/77)
20
0202
ERICSSON
T433504
PLUG, ANTI SPLASH (030/61)
20
0203
ERICSSON
0T65136.45.50
GASKET, ROUND 36X1,5 (030/78)
20
0204
ERICSSON
T215734
GEAR, RATCHET (030/14)
10
0205
ERICSSON
T211120
RACK (030/28)
10
0206
ERICSSON
T99512105001
BEARING (0330/35)
10
0207
ERICSSON
0N65118.24.50
SEAL, RING 18X1 (030/80)
20
0208
ERICSSON
0N65118.24.40
RING, SEAL 27X1,5 (040/15)
20
0209
ERICSSON
T12618763
GASKET INSPECTION DOOR (038/2)
10
0210
ERICSSON
0T65271.70.63
JW HEADER SPECIAL O-RING (040/9)
20
0211
ERICSSON
T208706
BEARING HALF, UPPER (071/4)
1
0212
ERICSSON
T208705
BEARING HALF, LOWER (071/5)
1
0213
ERICSSON
T12614998
CRANKSHAFT OIL LIP SEAL (073/5)
1
0214
ERICSSON
T12615068
THRUST BEARING SET (083/1&2)
1
0215
ERICSSON
0Y65245.53.63
JW HEADER SPECIAL O-RING (131/26)
20
0216
ERICSSON
0T65238.53.63
JW HEADER SPECIAL O-RING (134/2)
10
0217
ERICSSON
0T66027.36.61
ROCKER LO, O-RING (135/18)
10
0218
ERICSSON
0T66022.31.61
ROCKER LO, O-RING (135/19)
20
0219
ERICSSON
0T65235.53.63
ROCKER LO, O-RING (135/21)
14
0220
ERICSSON
0N65232.53.63
ROCKER LO, O-RING (135/39)
10
0221
ERICSSON
T318014
PISTON, ABSORBER (030/27A)
10
0222
ERICSSON
T313384
SHIM (074/21)
2
0223
ERICSSON
T435607
SPRING (074/8)
24
0224
ERICSSON
T442076
SHIM (074/9)
2
0225
ERICSSON
T9950530794
CAM THRUST ROLLER BEARING (074/10)
4
0226
ERICSSON
0T200.01.0050
CAM THRUST RETAINING RING (074/11)
2
0227
ERICSSON
T609600
CAMSHAFT SHELL BEARING (096/7&8)
22
0228
ERICSSON
0N65229.53.63
O-RING (096/15)
44
0229
ERICSSON
T417019
GASKET (097/2)
4
0230
ERICSSON
T442106
GASKET (097/15)
10
0231
ERICSSON
8886H64455
O-RING (097/5)
4
0232
ERICSSON
T401842
SPRING SET (215/15)
162
0233
ERICSSON
T308807
KEY LONG (052/19)
30
0234
ERICSSON
T402066
KEY SHORT (215/16)
27
0235
ERICSSON
T600100-UNDERSIZED
MAIN BERING UNDERSIZED, PC 2 & 3 (001/1)
1
0236
DIEHL
T12619340
12K CYLINDER KITS
20
0237
DIEHL
0T65236.53.63
O-RING, ROCKER ARM
64
0238
DIEHL
0N65232.53.63
O-RING, ROCKER ARM
32
0239
DIEHL
0T66022.31.61
O-RING, ROCKER ARM
64
0240
DIEHL
0Y66027.36.61
O-RING, ROCKER ARM
32
0241
DIEHL
0T225120285
RIN, GROOVE 12 X 28 MM
64
0242
DIEHL
0N652345368
O-RING, PISTON TUBE
64
0243
DIEHL
T212336
INTAKE VALVE (014/2)
6
0244
DIEHL
T011964/T017737
EXHAUST VALVES (015/4)
14
0245
DIEHL
T210880/T57321
VALVE ROTATORS (015/20)
12
0246
DIEHL
T600100
MAIN BEARING, PC 2 & 3 (001/1)
4
0247
DIEHL
T12618763
GASKET INSPECTION DOOR (038/2)
20
0248
PECOS
ON652787963
O-RING
4
0249
PECOS
ON652627063
O-RING
4
0250
PECOS
T312611
RING, MALE
2
0251
PECOS
T312610
RING, FEMALE
2
0252
PECOS
OT652355363
O-RING
4
0253
PECOS
T401842
SPRING SET
288
0254
PECOS
T308807
KEY, SHORT
60
0255
PECOS
T402066
KEY, SHORT
54
0256
TIPPECANOE
T12619340
12,000 HOUR CYL, INSP. KIT
10
0257
TIPPECANOE
T600100
MAIN BERAING, PC 2 & 3 (001/1)
6
0258
TIPPECANOE
T434086
GUIDE, SPRING
10
0259
TIPPECANOE
T109607
CONROD SMALL END BEARING (003/5)
10
0260
TIPPECANOE
T212886
CONROD LONG STUD (003/6)
10
0261
TIPPECANOE
T212885
CONROD SHORT STUD (003/7)
10
0262
TIPPECANOE
T311947
CONROD STUD BLIND NUTS (DOMED)(003/9)
20
0263
TIPPECANOE
T217380
CONROD NUT (003/10)
20
0264
TIPPECANOE
0T25512.028.5
PIN, GROOVE 12 X 28 MM (010/28)
10
0265
TIPPECANOE
T212336
INTAKE VALVE (014/2)
1
0266
TIPPECANOE
T011864/T017737
EXHAUST VALVE (015/4)
8
0267
TIPPECANOE
T210880/T57321
VALVE ROTATORS (015/20)
4
0268
TIPPECANOE
P417289N
WASHER, PET COCK (019/9)
10
0269
TIPPECANOE
T210195
EXHAUST ROCKER ARM BUSHING (020/18)
20
0270
TIPPECANOE
T210194
EXHAUST ROCKER ARM BUSHING (020/19)
20
0271
TIPPECANOE
T210197
INTAKE ROCKER ARM BUSHING (020/20)
20
0272
TIPPECANOE
T433491
SHIM LAMINATED (030/9)
10
0273
TIPPECANOE
T216897
SEAT, VALVE (030/16)
10
0274
TIPPECANOE
T312092
PIN, VALVE (020/19)
10
0275
TIPPECANOE
T443055
SPRING, COMPRESSION (020/20)
10
0276
TIPPECANOE
0N65239.53.68
O-RING (020/37)
20
0277
TIPPECANOE
T317129
BOLT, HEAD (020/45)
120
0278
TIPPECANOE
0N65246.53.68
O-RING (020/46)
20
0279
TIPPECANOE
0N65273.70.68
O-RING (020/72)
10
0280
TIPPECANOE
0N65258.70.68
O-RING (020/73)
10
0281
TIPPECANOE
0T65275.70.68
O-RING (020/74)
20
0282
TIPPECANOE
T12615081
SEAL, OIL LIP90IDX110 ODX12VITON (030/75)
10
0283
TIPPECANOE
T12615082
SEAL, OIL LIP70IDX110 ODX10VITON (030/76)
20
0284
TIPPECANOE
0T65130.38.50
GASKET 30X1,5 (030/79)
10
0285
TIPPECANOE
0N65118.24.50
SEAL, RING 18X1 (030/80)
10
0286
TIPPECANOE
T446394
BEARING, SHAFT POINTER (030/36)
20
0287
TIPPECANOE
T106441
TAPPET (030/4A)
20
0288
TIPPECANOE
T450741
BEARING, ROLLER (030/6)
20
0289
TIPPECANOE
T312632
SPINDLE (030/7)
10
0290
TIPPECANOE
T433490
SEAT, TAPPET (030/8)
10
0291
TIPPECANOE
E156743
BARREL & PLUNGER (030/11)
10
0292
TIPPECANOE
T442459
COLLAR, SPRING (030/12)
10
0293
TIPPECANOE
T52899
TWO-PIECE SHIM ASSEMNLY (030/22)
10
0294
TIPPECANOE
T318013
LINER, ABSORBER (030/29)
10
0295
TIPPECANOE
T318016
SPRING, (030/33)
10
0296
TIPPECANOE
T12617101
RING, PISTON 70 ODC2,5 THK (030/39)
10
0297
TIPPECANOE
0N65244.53.68
O-RING (030/44)
10
0298
TIPPECANOE
T452210
ORIFICE/DIAPHRAGM (030/32)
20
0299
TIPPECANOE
T99512107001
BEARING (030/34)
10
0300
TIPPECANOE
T433569
GASKET , SERRATED RING (030/77)
10
0301
TIPPECANOE
T433504
PLUG, ANTI SPLASH (030/61)
10
0302
TIPPECANOE
0T65136.45.50
GASKET, ROUND 36X1,5 (030/78)
20
0303
TIPPECANOE
T215734
GEAR, RATCHET (030/14)
20
0304
TIPPECANOE
T211120
RACK (030/28)
20
0305
TIPPECANOE
T99512105001
BEARING (0330/35)
10
0306
TIPPECANOE
0N65118.24.50
SEAL, RING 18X1 (030/80)
10
0307
TIPPECANOE
0N65118.24.40
RING, SEAL 27X1,5 (040/15)
10
0308
TIPPECANOE
T12618763
GASKET INSPECTION DOOR (038/2)
20
0309
TIPPECANOE
0T65271.70.63
JW HEADER SPECIAL O-RING (040/9)
20
0310
TIPPECANOE
T208706
BEARING HALF, UPPER (071/4)
1
0311
TIPPECANOE
T208705
BEARING HALF, LOWER (071/5)
1
0312
TIPPECANOE
T12614998
CRANKSHAFT OIL LIP SEAL (073/5)
1
0313
TIPPECANOE
T12615068
THRUST BEARING SET (083/1&2)
1
0314
TIPPECANOE
0Y65245.53.63
JW HEADER SPECIAL O-RING (131/26)
20
0315
TIPPECANOE
0T65238.53.63
JW HEADER SPECIAL O-RING (134/2)
10
0316
TIPPECANOE
0T66027.36.61
ROCKER LO, O-RING (135/18)
10
0317
TIPPECANOE
0T66022.31.61
ROCKER LO, O-RING (135/19)
20
0318
TIPPECANOE
0T65235.53.63
ROCKER LO, O-RING (135/21)
14
0319
TIPPECANOE
0N65232.53.63
ROCKER LO, O-RING (135/39)
10
0320
TIPPECANOE
T318014
PISTON, ABSORBER (030/27A)
10
0321
TIPPECANOE
T313384
SHIM (074/21)
2
0322
TIPPECANOE
T435607
SPRING (074/8)
24
0323
TIPPECANOE
T442076
SHIM (074/9)
2
0324
TIPPECANOE
T9950530794
CAM THRUST ROLLER BEARING (074/10)
4
0325
TIPPECANOE
0T200.01.0050
CAM THRUST RETAINING RING (074/11)
2
0326
TIPPECANOE
T609600
CAMSHAFT SHELL BEARING (096/7&8)
22
0327
TIPPECANOE
0N65229.53.63
O-RING (096/15)
44
0328
TIPPECANOE
T417019
GASKET (097/2)
4
0329
TIPPECANOE
T442106
GASKET (097/15)
10
0330
TIPPECANOE
8886H64455
O-RING (097/5)
4
0331
TIPPECANOE
T401842
SPRING SET (215/15)
162
0332
TIPPECANOE
T308807
KEY LONG (052/19)
30
0333
TIPPECANOE
T402066
KEY SHORT (215/16)
27
0334
GUADALUPE
T12619340
12K INSPECTION KIT
10
0335
GUADALUPE
OT65255.70.63
O-RING
2
0336
GUADALUPE
OT65130.38.40
RING, JOINT
10
0337
GUADALUPE
T601700
SHIM
10
0338
GUADALUPE
T212336
VALVE, INLET
20
0339
GUADALUPE
T319472
SEAT, VALVE INSERT
20
0340
GUADALUPE
OT23512.030.1
RIN, ROLL
10
0341
GUADALUPE
T12618763
GASKET, INSPECTION DOOR
10
0342
GUADALUPE
T400149
GASKET
50
0343
GUADALUPE
P400153N
GASKET
40
0344
GUADALUPE
T425652
GASKET
50
0345
GUADALUPE
T433291
GASKET
10
0346
GUADALUPE
ON06018.10.05
PLUG, MALE THREADED
10
0347
GUADALUPE
ON65118.24.40
GASKET, ROUND COPPER
70
0348
GUADALUPE
ON65145.55.40
GASKET
80
0349
GUADALUPE
T609600
CAM BEARINGS
22
0350
GUADALUPE
T212885
SHORT ROD BOLTS
10
0351
GUADALUPE
T160388
LONG ROD BOLTS
10
0352
GUADALUPE
T217380
NUTS
40
0353
GUADALUPE
T311947
BLIND BUTS
40
0354
GUADALUPE
T011864
VALVE, EXHAUST
20
0355
GUADALUPE
E156743
BARREL PLUNGER ASSEMBLY
5
0356
GUADALUPE
T215471
GASKET (INTERCOOLER)
2
0357
GUADALUPE
T600100
BEARING
4
0358
LARAMIE
T12619340
SVK INSPECTION KIT, 12K HOUR
10
0359
LARAMIE
T360948
CYLINDER HEAD BLOCKING PIECES
20
0360
LARAMIE
T017737
VALVE, EXHAUST
20
0361
LARAMIE
OT23504.040.1
PIN, ROLL 4 X 40
10
0362
LARAMIE
OT23510.014.1
PIN, ROLL 10 X 14
10
0363
LARAMIE
OT65255.70.63
O-RING
2
0364
LARAMIE
T99570584102-0001
PASTE, MOLYKOTE G-N, TUBE
1
0365
LARAMIE
OT65130.38.40
RING, JOINT
10
0366
LARAMIE
T601700
SHIM
10
0367
LARAMIE
ON23508.035.1
PIN, ROLL
10
0368
LARAMIE
T212336
VALVE, INLET
20
0369
LARAMIE
T319472
SEAT, VALVE INSERT
20
0370
LARAMIE
T99361354601
ADHESIVE, PERMABOND 910, 10 OZ.
1
0371
LARAMIE
OT23512.030.1
PIN, ROLL
10
0372
LARAMIE
T12618763
GASKET, INSPECTION DOOR
10
0373
LARAMIE
T400149
GASKET
50
0374
LARAMIE
P400149
GASKET
40
0375
LARAMIE
T425652
GASKET
40
0376
LARAMIE
T433291
GASKET
10
0377
LARAMIE
ON06018.10.05
PLUG, MALE THREADED
10
0378
LARAMIE
ON65118.24.40
GASKET, ROUND COPPER
70
0379
LARAMIE
ON65145.55.40
GASKET
80
0380
LARAMIE
T609600
CAM BEARINGS
22
0381
LARAMIE
100001
FREIGHT
1
0382
PATUXENT
T319472
SEAT, INLET VALVE
30
0383
PATUXENT
P417289N
WASHER, PET COCK
20
0384
PATUXENT
ON65232.53.63
ROCKER LO O-RING
20
0385
PATUXENT
T53026
INTAKE PINS, ROCKER ARM
10
0386
PATUXENT
T417082
CYLINDERICAL KEY
20
0387
PATUXENT
T360948
CLINDER HEAD BLOCKING PIECE
40
0388
PATUXENT
OT23504.040.1
PIN, ROLL 4 X 40
20
0389
PATUXENT
OT23510.014.1
PIN, ROLL 10 X 14
20
0390
PATUXENT
OT65255.70.63
O-RING
4
0391
PATUXENT
T99570584102-0001
PASTE, MOLYKOTE G-N, TUBE
2
0392
PATUXENT
ON23508.035.1
PIN, ROLL
20
0393
PATUXENT
T99361354601
ADHESIVE, PERMABOND 910, 10 OZ.
20
0394
PATUXENT
OT23512.030.1
PIN, ROLL
20
0395
PATUXENT
OT22512.028.5
PIN, GROOVE 12 X 28 MM
20
0396
PATUXENT
T400149
GASKET
100
0397
PATUXENT
P400153N
GASKET
80
0398
PATUXENT
T425652
GASKET
100
0399
PATUXENT
T433291
GASKET
20
0400
PATUXENT
ON65145.55.40
GASKET
160
0401
PATUXENT
T12618763
GASKET- INSPECTION DOOR
20
0402
PATUXENT
T12618790
GASKET- CAM COVER
24
0403
PATUXENT
T12615305
INJECTOR BODY
3
0404
PATUXENT
T426672
SEAT
2
0405
PATUXENT
T426671
MAIN VALVE
2
0406
PATUXENT
T418013
GUIDING BUSHING
2
0407
PATUXENT
ON652295363
O-RING
2
0408
PATUXENT
OT652505363
O-RING
2
0409
PATUXENT
T418010
DRAIN POPPET
2
0410
PATUXENT
T418011
PISTON
2
0411
PATUXENT
T413944
PUSHER
2
0412
PATUXENT
T435683
GUIDING BUSH
2
0413
PATUXENT
OT652051763
O-RING
2
0414
GRUMMAN
T99638010301
BODY, QUICK DISCONNECT
60
0415
GRUMMAN
99638020301
NIPPLE
60

6. The Government intends on awarding a Firm-Fixed Price contract for the aforementioned MAN Diesel-SEMT Pielstick Main Engine Parts. See attached brand name justification.

7. The required delivery and acceptance date vary on the ship. Delivery and acceptance will occur at the following addresses:

CLIN
Ship
Location
RDD
0001-0078
LENTHALL
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23511 3/9/2018

0079-0156
HUMPRHEYS
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23512 6/1/2018

0157-0235
ERICSSON
N40443 MSC BATS SAN DIEGO

9284 Balboa Ave.

San Diego, CA 92127 8/1/2018

0236-0247
DIEHL
N40443 MSC BATS SAN DIEGO

9284 Balboa Ave.

San Diego, CA 92128 5/1/2018

0248-0255
PECOS
N40443 MSC BATS SAN DIEGO

9284 Balboa Ave.

San Diego, CA 92130 4/25/2018

0256-0333
TIPPECANOE
N40443 MSC BATS SAN DIEGO

9284 Balboa Ave.

San Diego, CA 92131 6/1/2018

0334-0357
GUADALUPE
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23512 3/15/2018

0358-0381
LARAMIE
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23513 1/12/2018

0382-0413
PATUXENT
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23514 5/18/2018

0414-0415
GRUMMAN
Military Sealift Command Norfolk

Building W143 Doorway 10 1968 Gilbert Street Norfolk, VA 23511 1/28/2018

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be resolved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes if an exception applies in accordance with 52.212-1(f). Failure of a quote to address any items required in the submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Quotes, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price

2. Total Firm Fixed price

3. Terms of Express Warranty

4. Any Discount Terms

5. Estimated time of delivery

6. Technical Submission Requirements

a. For Parts/Supply buy, the quote shall contain a description, including part number and title for each item listed in the solicitation, to allow the Government to verify that the quoted parts match the requirements listed in the requirements schedule.

7. Responses to the solicitation are due January 12, 2018 no later than 9:00 a.m. local time, Norfolk, Virginia. Quotesmay be e-mailed to Lindsay Bonnema at lindsay.bonnema@navy.mil. Please reference the solicitation number on yourquote.
Primary Point of Contact: Lindsay Bonnema, (757) 443-5917, lindsay.bonnema@navy.mil
Secondary Point of Contact: Bryan Makuch, (757) 443-5677, bryan.makuch@navy.mil

The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

9. Provision 52.212-2 Evaluation—Commercial Items (Oct 2014) applies to this acquisition. Award will be made in accordance with FAR Subpart 13.5 to a responsible quoter who provides a technically acceptable solution at a fair market price and who has acceptable past performance.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

(iii) past performance (see FAR 15.304); applies over $150,000 Award shall be made to the lowest priced technically acceptable offeror.

To be considered a technically acceptable solution for a parts procurement, the quoted parts shall meet the solicitation requirements including required parts, delivery dates, and terms and conditions stated in the solicitation. To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met.

A past performance evaluation will be conducted in accordance with FAR 13.106-2(b) (3). The Government intends to utilize the Government-wide Past Performance Information Retrieval System (PPIRS) for the past performance evaluation as a basis for anticipating successful/unsuccessful performance on this required effort. To be considered acceptable for past performance, a search of the PPIRS shall reveal no negative past performance information for the recent and relevant records. In the event that there are no recent and/or relevant PPIRS records, the quoter’s past performance record shall be considered “unknown.” In the context of acceptable or unacceptable, “unknown” past performance shall be considered “acceptable.” To be considered recent, the effort must have been completed within the previous three (3) years from date of this draft award notice. To be considered relevant the record should be similar in terms of scope and magnitude. “Scope” is defined as experience in areas defined in the SOW. “Magnitude” is defined as the measure of similarity of the volume, dollar value and duration of work actually performed under the quoter’ s submitted contracts to the SOW. At the quoter’s discretion, additional past performance information may be submitted with the quote as a supplement to PPIRS. If furnished, this submission will be evaluated in accordance with the procedures described above.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

10. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items with its offer.

52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Jan 2017) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision-- “Administrative merits determination” means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Arbitral award or decision” means an arbitrator or arbitral panel determination that a labor law violation occurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Civil judgment” means--

(1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction.

(2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“DOL Guidance” means the Department of Labor (DOL) Guidance entitled: “Guidance for Executive Order 13673, ‘Fair Pay and Safe Workplaces’ “. The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces.

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Enforcement agency” means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are--

(1) Department of Labor Wage and Hour Division (WHD) for--

(i) The Fair Labor Standards Act;

(ii) The Migrant and Seasonal Agricultural Worker Protection Act;

(iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act;

(v) 41 U.S.C. chapter 67, formerly known as the Service Contract Act;

(vi) The Family and Medical Leave Act; and

(vii) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors);

(2) Department of Labor Occupational Safety and Health Administration (OSHA) for--

(i) The Occupational Safety and Health Act of 1970; and

(ii) OSHA-approved State Plans;

(4) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for--

(i) Section 503 of the Rehabilitation Act of 1973;

(ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and

(iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity);

(5) National Labor Relations Board (NLRB) for the National Labor Relations Act; and

(6) Equal Employment Opportunity Commission (EEOC) for--

(i) Title VII of the Civil Rights Act of 1964;

(ii) The Americans with Disabilities Act of 1990;

(iii) The Age Discrimination in Employment Act of 1967; and

(iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act).

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Labor compliance agreement” means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters.

“Labor laws” means the following labor laws and E.O.s:

(1) The Fair Labor Standards Act.

(2) The Occupational Safety and Health Act (OSHA) of 1970.

(3) The Migrant and Seasonal Agricultural Worker Protection Act.

(4) The National Labor Relations Act.

(5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act.

(6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act.

(7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity).

(8) Section 503 of the Rehabilitation Act of 1973.

(9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974.

(10) The Family and Medical Leave Act.

(11) Title VII of the Civil Rights Act of 1964.

(12) The Americans with Disabilities Act of 1990.

(13) The Age Discrimination in Employment Act of 1967.

(14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors).

(15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html).

“Labor law decision” means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of “labor laws”.

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

Note to paragraph (a): By a court order issued on October 24, 2016, the following definitions in this paragraph (a) are enjoined indefinitely as of the date of the order: “Administrative merits determination”, “Arbitral award or decision”, paragraph (2) of “Civil judgment”, “DOL Guidance”, “Enforcement agency”, “Labor compliance agreement”, “Labor laws”, and “Labor law decision”. The enjoined definitions will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It [_] has, [_] has not, participated in a previous…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.