SYNOPSIS.docx

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

Military Sealift Command Synopsis

1. Action Code: Presolicitation

2. Date: 11/17/15

3. Year: Fiscal Year Fiscal Year 2016

4. Contracting Office Zip Code: 23511

5. Classification Code: 20

6. Contracting Office Address: 471 East C. Street, BLDG SP-64, Norfolk, VA

7. Subject: USNS HOWARD O. LORENZEN (T-AGM 25), 75HP oil free, water cooled air compressors

8. Proposed Solicitation Number: N32205-16-T-4202

9. Closing Response Date: 11/23/15

10. Contact Point or Contracting Officer: thomas.j.martin2@navy.mil, 757 443-2852

11. Contract Award and Solicitation Number: TBD / N32205-16-T-4202

12. Contract Award Dollar Amount: TBD

13. Contract Line Item Number TBD

14. Contract Award Date: TBD

15. Contractor: TBD

16. Description: THIS IS A SYNOPSIS NOTICE ONLY. This is not a solicitation or request for quotes and no contract or purchase order will be awarded from this notice. Military Sealift Command Norfolk intends to award a firm-fixed price small business set-aside contract for this one time procurement to procure the following brand name or equal material for the USNS HOWARD O. LORENZEN (T-AGM 25).

A. P/N IRN75H-OF 150W, Compressor, Oil Free, 75 HP, Water Cooled, 150 PSI, 269 CFM Manufacturer / Model: Ingersoll Rand / IRN75H-OF 150W or EQUAL. Salient Characteristics: Two Stage, Oil Free Air, Rotary Type, Water Cooled W/ Flow Control Valve. Coolers: 1 Intercooler 1 Aftercooler 1 Oil Cooler Lubrication: Sump Capacity 9.2 US Gallons 35 Litre Total Lubrication Capacity 14 US Gallons 53 Liter Oil Filtration Full Capacity Oil Filter, Four (4) Micron Spin on Type Design. A Pressure Relief Valve is to be provided to insure Lubrication Pressure to all Lubricated Areas. Oil-Pump Type an Internal, Positive Displacement, Gear Type, Oil Pump SHALL be provided. The Pump SHALL be Direct Driven Off of the Bull Gear Shaft, Thereby Providing Continuous Positive Lubrication to all Gears and Bearings. Customer Interfaces: Discharge Air Connection 1.5 NPT (inches) Water Inlet and Outlet Connection 1.5 NPT (inches) Condensate Drain Connection (Intercooler) 0.38 NPT (inches) Condensate Drain Connection (Aftercooler) 0.38 NPT (inches) Electrical Power Cable Hole Diameter 2.5 inches 64 MM Nominal Horsepower 75, Hybrid Permanent Magnet, 60 HZ Input Controls: The Compressor Shall be Equipped Manufacturer Supplied Safety Relief Valves (ASME National Board Registered in both the Inter-Stage and Final Discharge Piping. The Compressor SHALL be Equipped with a Check Valve after the Moisture Separator to prevent back flow from the Air System. The Control System SHALL Incorporate High Temperature and Pressure Safety Shutdowns for both Compression Stages. A Power Drive Module (PDM) SHALL be integral to the Unit. The PDM SHALL Contain all the Components Required to Safety Start, Monitor, and Control the Compressor. Capacity and Speed Control SHALL be accomplished through the use of a Variable Frequency Drive (VFD), Capable of Driving the Permanent Magnet Motor. The VFD and Control System SHALL be used as to Soft Start the Motor as it Ramps-Up to Speed. The Compressor SHALL be equipped with a Microprocessor Controller Capable of Monitoring Essential Operating Parameters and Comparing them against Preprogrammed Limits. The Controller SHALL Automatically Display a Warning and/or Stop the Compressor in the event any Parameter Deviates from its Preprogrammed Limits. The Controller SHALL offer Feedback to the Operator via a Human Machine Interface (HMI) Touch Scree Located in the Machine. Feedback Shall Include but not be Limited to: Display Measured Data Points, Adjustable Operating Parameters Warning and/or Alarm Points. Dimensions and Weight: L W H Package Dimensions (L X W X H) Inches 81.8 52 76.7 MM 2078 1321 1948 Shipping Weight, Total Package 4500 LBS 2041 KG. Quantity is 2 each.

B. P/N 38465993, Line Reactor Manufacturer: Ingersoll and Size: 460VAC 130 AMPS, Weight 81 LBS or EQUAL. Quantity is 2 each.

C. P/N 23439946, F850NG Filter, Coalescing / Mist Separation Manufacturer/ Model : Ingersoll Rand / NLM500 F850NG Size or EQUAL: 500 CFM this specification describes a filter designed to remove oil and water Liquid /Mists and solid particles from compressed air. It SHALL have Filtering Capability which exceeds the quality standards for instrument air as defined by The Instrument Society of America. Filter must be capable of removing oil and water Liquid/Mist down to .5 PPM by weight. Filters SHALL use both Mechanical and Centrifugal action to remove up to 99% of all Solid Particles and Droplets of water or oil before the air reaches the filter element. The separated contaminates will drop to the bottom of the Filter Housing for discharge through a drain valve. A separate Prefilter and Moisture Separator SHALL NOT be required for the removal of solids and condensate moisture. The Filter Pressure Drop at rated flow SHALL NOT be more than .5 PSIG when element is new and the Maximum Pressure Drop throughout Element Life will not exceed 2 PSI. The expected element life at rated performance conditions should be at least 10 years. Filter to be equipped with a ship loose pressure gage to measure pressure drop across the filter element, and a drain port for connecting optional automatic drain valve. Filter shall be Ingersoll Rand Model F-850NG or EQUAL. Quantity is 2 each.

D. Power Outage Restart Option for IRN75H Compressors or EQUAL Compressors. Quantity is 2 each.

E. Stainless Steel Afterfoolers for IRN75H Compressors or EQUAL Compressors. Quantity is 2 each.

F. Stainless Steel Oil System Piping for IRN75H Compressors or EQUAL Compressors. Quantity is 2 each.

a. All responsible sources may submit a capability statement, proposal or quotation, which shall be considered by the agency.

b. Quantity, including any options for additional quantities: 12 total parts

c. Unit of issue: EA

d. Destination information: FOB: Destination

e. Delivery Date: 15 January 2016

f. This procurement is a FAR 12 acquisition being conducted under FAR Subpart 13.5 Test Program for Certain Commercial Items. Section 815 of the National Defense Authorization Act of FY 2015 made this authority permanent. Accordingly, simplified acquisitions procedures apply. After receipt of quotes, the Government may without notice, negotiate with and, if desired, seek a quote revision from as many or as few quoters as it, in its discretion, deems appropriate.

g. Basis For Award: Award will be made to the responsible, technically acceptable quoter, whose quote, conforming to the Request for Quotation, offers the lowest evaluated price.

17. Place of Contract Performance: Contractors facility

18. Set-aside Status: Small Business Set-aside

V1.1 (17 June 2014)