N32205-15-T-1387.doc

Section SF 1449 - CONTINUATION SHEET

KAISER / 8-14-2015 / ENGINE DSL 3509HP 900RPM

FFP

KAISER / 8-14-2015 / ENGINE DSL 3509HP 900RPM

FOB: Destination

PURCHASE REQUEST NUMBER: N213075090V040

NET AMT

21512771 Key, 3/16 X 3/16 X 7/8 inches

21512771 Key, 3/16 X 3/16 X 7/8 inches

NET AMT

2151791 Ball Bearing

2151791 Ball Bearing

NET AMT

2155676 Shims, Governor Drive

2155676 Shims, Governor Drive

NET AMT

21710226 Conrod Bearing - Upper

21710226 Conrod Bearing - Upper

NET AMT

21710228 Conrod Bearing - Lower

21710228 Conrod Bearing - Lower

NET AMT

2170017-1 Connecting Rods

2170017-1 Connecting Rods

NET AMT

21511034 Dowel, 3/8 x 5/8 inches

21511034 Dowel, 3/8 x 5/8 inches

NET AMT

21511041 Dowel, 3/8 x 7/8 inches

21511041 Dowel, 3/8 x 7/8 inches

NET AMT

2361049 Shaft, Drive

2361049 Shaft, Drive

NET AMT

25010630 Gasket Kit, Overhaul, 18-Cyl. Engine Set

25010630 Gasket Kit, Overhaul, 18-Cyl. Engine Set

NET AMT

2181196 O-Ring, Gasket

2181196 O-Ring, Gasket

NET AMT

2155671 Shim Set

2155671 Shim Set

NET AMT

2151401 Cotter Pins

2151401 Cotter Pins

NET AMT

2152853 Needle Bearing

2152853 Needle Bearing

NET AMT

2171016-1 Bushings, Conrod

2171016-1 Bushings, Conrod

NET AMT

2152535-2 Gasket

2152535-2 Gasket

NET AMT

24610929 Spring

24610929 Spring

NET AMT

24200517-1 Piston Ring Sets

24200517-1 Piston Ring Sets

NET AMT

21410365-1 Bearings, Main thrust

21410365-1 Bearings, Main thrust

NET AMT

21410166 Bearings, Main

21410166 Bearings, Main

NET AMT

22110115 Cylinder Liner

22110115 Cylinder Liner

NET AMT

2311062-1 Lower Cylinder Liner Sleeve

2311062-1 Lower Cylinder Liner Sleeve

NET AMT

2241322-5 Valve Lever Shaft

2241322-5 Valve Lever Shaft

NET AMT

24026038 Hose

24026038 Hose

NET AMT

2151119 Gaskets, Copper

2151119 Gaskets, Copper

NET AMT

2281032 Spacer, Exhaust, 1 3/8 inches

2281032 Spacer, Exhaust, 1 3/8 inches

NET AMT

2154307 Capscrew, Special

2154307 Capscrew, Special

NET AMT

2281033 Spacer, Exhaust, 3/4 inch

2281033 Spacer, Exhaust, 3/4 inch

NET AMT

2281033 Spacer, Exhaust, 3/4 inch

2281033 Spacer, Exhaust, 3/4 inch

NET AMT

21558210 Nut, Lock HT, 1/2-13

21558210 Nut, Lock HT, 1/2-13

NET AMT

21553816 Washer, Special

21553816 Washer, Special

NET AMT

2370014 Indicator Cock

2370014 Indicator Cock

NET AMT

21536522 Gasket, Exh. Manifold to Turbo

21536522 Gasket, Exh. Manifold to Turbo

NET AMT

2241294-1 Sleeve, Pushrod

2241294-1 Sleeve, Pushrod

NET AMT

21510519 Dowel, 1/2 x 1 inches

21510519 Dowel, 1/2 x 1 inches

NET AMT

2154025-2 Gasket, Air Elbow

2154025-2 Gasket, Air Elbow

NET AMT

21522612-2 Gasket, Fuel Pump

21522612-2 Gasket, Fuel Pump

NET AMT

21522625 Gasket

21522625 Gasket

NET AMT

2153409-1 Grommet Assembly

2153409-1 Grommet Assembly

NET AMT

2153657-1 Gasket, Shrouded Exhaust

2153657-1 Gasket, Shrouded Exhaust

NET AMT

2402466-1 Valve, Snubber

2402466-1 Valve, Snubber

NET AMT

2151691-1 Nut, 5/8inch -11

2151691-1 Nut, 5/8inch -11

NET AMT

2402096 Clamp, Elbow

2402096 Clamp, Elbow

NET AMT

24017012 Tube, Fuel Injection, Shielded

24017012 Tube, Fuel Injection, Shielded

NET AMT

24023064 Hose

24023064 Hose

NET AMT

24031225 Hose

24031225 Hose

NET AMT

23913130 Bushing

23913130 Bushing

NET AMT

23913129 Bushing

23913129 Bushing

NET AMT

23510814 Impeller, Driven

23510814 Impeller, Driven

NET AMT

24031119 Hose

24031119 Hose

NET AMT

24031667 Hose

24031667 Hose

NET AMT

2491117 Valve Seat Bushing

2491117 Valve Seat Bushing

NET AMT

24031624 Hose, LO To Turbo

24031624 Hose, LO To Turbo

NET AMT

2403166 Hose with Fire Sleeve 44 inches

2403166 Hose with Fire Sleeve 44 inches

NET AMT

24031187 Hose, Water to Gas Inlet Casing

24031187 Hose, Water to Gas Inlet Casing

NET AMT

2491246 Stem, L.O. Reg. Valve

2491246 Stem, L.O. Reg. Valve

NET AMT

21547910 Steel Ball, 3/8 inches

21547910 Steel Ball, 3/8 inches

NET AMT

24031277 Hose

24031277 Hose

NET AMT

23510824 Drive Gear, L.O. Pump

23510824 Drive Gear, L.O. Pump

NET AMT

24031272 Hose

24031272 Hose

NET AMT

23913665 Gasket

23913665 Gasket

NET AMT

2153211-1 Lock Nut, 5/8-11

2153211-1 Lock Nut, 5/8-11

NET AMT

24031291 Hose

24031291 Hose

NET AMT

22511421 Impeller, Water Pump

22511421 Impeller, Water Pump

NET AMT

22200243 Cylinder Heads, New (251 Plus)

22200243 Cylinder Heads, New (251 Plus)

NET AMT

23200131 Fuel Injection Pumps (18mm)

23200131 Fuel Injection Pumps (18mm)

NET AMT

22300129 Fuel Nozzle & Holder (145X400)

22300129 Fuel Nozzle & Holder (145X400)

NET AMT

23202410 Fuel Pump Supports, Unit Exchange

23202410 Fuel Pump Supports, Unit Exchange

NET AMT

2251193 Bearing, Impeller End

2251193 Bearing, Impeller End

NET AMT

2251201 Bearing, Drive End

2251201 Bearing, Drive End

NET AMT

2251216 Oil Seal

2251216 Oil Seal

NET AMT

2251181-1 Oil Slinger

2251181-1 Oil Slinger

NET AMT

22512812 Sleeve

22512812 Sleeve

NET AMT

2251253-4 Gasket, Seal Plate to Frame

2251253-4 Gasket, Seal Plate to Frame

NET AMT

16393079 Coupling 3 inch

16393079 Coupling 3 inch

NET AMT

2351156-1 Gear, Drive

2351156-1 Gear, Drive

NET AMT

2151054 Dowel, Straight, 1/2 x 1 inch

2151054 Dowel, Straight, 1/2 x 1 inch

NET AMT

16393715 Pipe Plug, Gear End, 1/2 inch

16393715 Pipe Plug, Gear End, 1/2 inch

NET AMT

21510532 Pin, Spiral, 1/4 x 5/8 inches

21510532 Pin, Spiral, 1/4 x 5/8 inches

NET AMT

2161441 Thrust Plate, Bearing to Flywheel

2161441 Thrust Plate, Bearing to Flywheel

NET AMT

2161332 Camshaft Bushings

2161332 Camshaft Bushings

NET AMT

2155172 Special Nut, Gear to Shaft

2155172 Special Nut, Gear to Shaft

NET AMT

24023635 Elbow, 90 Deg., 7/8 inch-14

24023635 Elbow, 90 Deg., 7/8 inch-14

NET AMT

24015918 Spacer

24015918 Spacer

NET AMT

24030681 Clamp

24030681 Clamp

NET AMT

24022111 Union, 5/8 inch

24022111 Union, 5/8 inch

NET AMT

2403386 Tube, 5/8 inch x .049 x 23

2403386 Tube, 5/8 inch x .049 x 23

NET AMT

21555892 Capscrew, 3/8 inch -16 x 2

21555892 Capscrew, 3/8 inch -16 x 2

NET AMT

2151491-1 Washer, 3/8 inch

2151491-1 Washer, 3/8 inch

NET AMT

24912916 Coupling

24912916 Coupling

NET AMT

21526730 Gasket

21526730 Gasket

NET AMT

2361343-1 Seal, Oil

2361343-1 Seal, Oil

NET AMT

21512749 Key, 3/16 x 3/16 x 1 1/2 inches

21512749 Key, 3/16 x 3/16 x 1 1/2 inches

NET AMT

21512781 Key, 3/16 x 3/16 x 1 3/4 inches

21512781 Key, 3/16 x 3/16 x 1 3/4 inches

NET AMT

21526711-2 Gasket

21526711-2 Gasket

NET AMT

23210554 Shaft, Fuel Booster Pump Drive

23210554 Shaft, Fuel Booster Pump Drive

NET AMT

21512779 Special Key, Gear to Shaft

21512779 Special Key, Gear to Shaft

NET AMT

21522653-2 Gasket, Cover to Bearing Housing

21522653-2 Gasket, Cover to Bearing Housing

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

BATS

N40443 MSC BATS WAREHOUSE

9284 BALBOA AVE

SAN DIEGO CA 92123

619-553-6053

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

N40443

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM

EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)

(a) This contract and employees working on this contract will be subject to the whistleblower rights and remedies in the pilot program on Contractor employee whistleblower protections established at 41 U.S.C. 4712 by section 828 of the National Defense Authorization Act for Fiscal Year 2013 (Pub. L. 112-239) and FAR 3.908.

(b) The Contractor shall inform its employees in writing, in the predominant language of the workforce, of employee whistleblower rights and protections under 41 U.S.C. 4712, as described in section 3.908 of the Federal Acquisition Regulation.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts over the simplified acquisition threshold.

(End of clause)

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

Technical

The technical evaluation will be based on the following:

Offeror is to provide statement that they are providing parts specified in the solicitation and/or technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature or other documents, if necessary. All parts must be BRAND NAME (OEM) Only!

Price Quote

A separate unit price and extended price must be submitted for each line item. The price quote shall be evaluated in accordance with FAR 13.106-3(a).

Responsible sources shall provide the following:

1. Price quote which identifies the requested items unit price and extended price

2. Total Firm Fixed Price

3. Prompt Payment Terms

4. Estimated time of delivery

5. Terms of express warranty

6. Remittance address, Tax ID Number, DUNS number and CAGE Code

7. A completed copy of the representations and certifications at FAR 52.212-3 Alternate I or a statement stating that they are available via the SAM website (https:www.sam.gov/portal/SAM/#1#1

8. Country where product is manufactured

Past Performance

Commercial item procurements using simplified acquisition procedures of FAR Part 13 per the Commercial Items Test Program (FAR Subpart 13.5) are not subject to the past performance procedures and requirements of FAR Subpart 15.3.

Basis for Award

Award will be made to the responsible, technically acceptable quoter, whose quote, conforming to the solicitation, offers the lowest evaluated price.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2015)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug, 2013) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (OCT 2014) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2014) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Oct 2001) of 52.219-9.

____ (iii) Alternate II (Oct 2001) of 52.219-9.

____ (iv) Alternate III (OCT 2014) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (July 2013) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (July 2013) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (JAN 2014) (E.O. 3126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

X (29) 52.222-35, Equal Opportunity for Veterans (Jul 2014)(38 U.S.C. 4212).

X (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

X (31) 52.222-37, Employment Reports on Veterans (July 2014) (38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Aug 2013). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-13.

____ (37)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (39)(i) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

X (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____(42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X (50) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

____ (51) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (52) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

X (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (E.O. 13658).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

_____ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (OCT 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(v) 52.222-26, Equal Opportunity (APR 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (JUL 2014) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xi) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Aug 2013).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (E.O. 13658).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

[Insert one or more Internet addresses] (End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

[Insert one or more Internet addresses]

(End of clause)

CAUTION - BRAND NAME ONLY

By accepting this purchase order, the Vendor expressly understands and acknowledges that this purchase order is only for the brand name items and parts identified in this purchase order and that the brand name items and parts constitute a material term of this purchase order. The Vendor shall not tender for delivery any substitute and/or alleged equal item or part. The Vendor is hereby warned that any substitute and/or alleged equal item or part tendered for delivery will be rejected by the Government as a non-conforming item and will provide a basis to cancel the purchase order or terminate the purchase order for cause. The Vendor shall be responsible for all costs, such as but not limited to shipping, delivery, repackaging, etc., and arrangements for the return of any non-conforming item. "

SHIP & BASE ACCESS (APR 2013)

Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using “Request a Read Receipt” function and to confirm receipt of facsimile transmissions.

Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically the following permissions are required:

1. El Paso Intelligence Center (EPIC) personnel screening requirement

2. Base/Repair Facility Access Request

3. Vehicle Access Request

4. Ship Access List (vendor-provided)

All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on “Contracts” in the upper right corner. Click on “Online Library of Common Documents” for all forms.

EPIC: Required for access to MSC vessels. Complete EPIC form strictly adhering to format requirements. For CONUS East and Gulf Coast repairs, forward request to msc.norfolk.epic@navy.mil and for CONUS West Coast and HI repairs, forward to MSC.SSUSD.EPIC@navy.mil EPIC personnel screening requests are desired seven calendar days prior to performance start date. Requests will be managed as expeditiously as circumstances permit. Vendor will be notified by MSC of personnel who are denied access to the vessel.

Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer.

RAPIDGate® is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico. Vendor is responsible to acquire RAPIDGate® status and destination base individual access badge(s) activation prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at http://www.RAPIDGate.com or tel. 877.727.4342. RAPIDGate® access requires (in succession) (1) Individual Base Commander approval for vendor to access base, (2) Successful vendor RAPIDGate® company annual enrollment, (3) Company employee individual enrollment and possession of RAPIDGate® identification badge for single base or multiple base (enterprise) access. Vendor is responsible to confirm that each employee held annual RAPIDGate® badge is active for the specific facility and performance period in accordance with RAPIDGate® User Agreement (http://www.RAPIDGate.com).

Enclave Access request may be selected on the “Naval Base Point Loma (NBPL) Access Request Form.”

Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms.

Ship Access List (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.

T-AKE email address:

MASTER@AKE#.NAVY.MIL

(example: master@ake8.navy.mil, where “8” is the hull number).

All other hulls address:

MASTER.SHIPNAME@MSC.NAVY.MIL

(example: master.sioux@msc.navy.mil).

(End of Text)

WOOD PACKAGING MATERIAL (WPM) - ADDITIONAL DELIVERY INSTRUCTIONS

In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.

MSC DELIVERY INSTRUCTIONS – SAN DIEGO, CA

Contractor shall clearly mark each package for shipment with the following information:

Mark for: USNS HENRY J KAISER

REQN NR: N213075090V040

Ship To:

MSC BATS Warehouse

9284 Balboa Ave

San Diego, CA 92123

Attn: Blake Nam Ph: 619-553-6053

MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS (AUG 2012)

The information contained in this instruction is supplemental to DFARS 252.232-7006.

The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction apply only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract.

When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, “Leave Blank.”

In some situations the WAWF system will pre-populate the “Pay DoDAAC,” “Admin By DoDAAC” and “Issue By DoDAAC.” The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s).

If Receiving Reports are required, ensure that the “Inspection” and “Acceptance” defaults of…