RevisedAttach11AddTechPropInstru.pdf

Attachment 11 – Additional Technical Proposal Instructions, Revised 07/16/15

Offerors are advised to give careful consideration to the Statement of Work (SOW), the attachment, Technical Evaluation Criteria in Section M of the RFP and the RFP as a whole in the development of their technical proposals. Offerors shall submit a proposal that addresses all of the task areas in the Statement of Work, including all subtasks. If the proposed approach will involve a subcontracting arrangement, then the Offeror shall include a letter of commitment from the subcontractor(s), plus documentation of the subcontractor’s expertise, qualifications and prior performance as well as a narrative describing how the Offeror will manage the subcontractor.

A detailed work plan should be submitted indicating how each aspect of the Statement of Work is to be accomplished. The technical proposal should be in as much detail as considered necessary to explain fully the proposed methods and rationale for their selection and should reflect a clear understanding of the nature of the work being undertaken.

Two (2) option subtasks have been included in the Statement of Work. Specifically, D.5.d and E.5.d Option 1 Subtask 5.4 Immunohistochemistry and D.8.c. and E.8.c Option 2 Subtask 8.3 Returning Data to Tissue Source Site. Both subtasks will be at the request of the COR and shall be conducted in a CLIA certified laboratory. These subtasks shall be exercised within the appropriate period of performance at the discretion of the Government. Offerors must propose on all tasks and subtasks, including the two subtasks noted above. However, Offerors must price both option 1 and option 2 subtasks separately for the base period and all options.

Offerors must include a Sustainable Acquisition Plan in their technical proposal that describes their approach and the quality assurance mechanisms in place for applying FAR

23.1 – Sustainable Acquisition Policy (and other Federal laws, regulations and Executive orders governing green purchasing) to this acquisition.

DEFINITIONS:

A. Recycled Content Products

Recycled content products are products that are made from or contain recovered materials.

That means replacing virgin materials with recycled materials, including post-consumer materials. There are currently more than 60 designated products in eight categories: paper and paper products, vehicular, construction, landscaping, park and recreation, transportation, non-paper office, and miscellaneous products. Examples of designated products include structural fiberboard, printing and writing papers. The current list of designated products, EPA's guidance, and related technical information can be found on EPA's web site at http://www.epa.gov.

B. Energy-Efficient Products: Energy Star®, FEMP-Designated, and Low Standby Power

EPAct of 2005, Section 104 and FAR 23.203 require federal agencies to purchase Energy Star® qualified or Department of Energy's (DOE's) Federal Energy Management Program (FEMP)-designated products when procuring energy- consuming products.

The technical requirements that each product must meet to become Energy Star® qualified are available at ENERGY STAR Qualified Products : ENERGY STAR. Information on FEMP-designated products can be found at http://www.eere.energy.gov/. Information on low standby power products can be found on FEMP's web site at:

http://www.eere.energy.gov.

C. Biobased Products

Biobased products are products determined by the Secretary of Agriculture to be commercial or industrial products (other than food or feed) that are composed in whole, or in significant part, of biological products or renewable domestic agricultural materials and forestry materials. Examples of USDA-designated biobased products include mobile equipment, hydraulic fluids, roof coatings, diesel fuel additives, and towels. USDA is responsible for implementing the BioPreferredsM procurement preference program.

Information on these designated products, USDA's guidance, and related documentation can be found at USDA's web site at http://www.biopreferred.gov. (The FAR is being revised to require that Federal agencies procure designated items composed of the highest percentage of biobased content practicable [FAR Case 2010-004].)

D. Environmentally Preferable Products and Services

Environmentally Preferable Products (EPP) are products or services that have a lesser or reduced effect on human health and the environment when compared with competing products or services that serve the same purpose. This comparison may consider raw materials acquisition, production, manufacturing, packaging, distribution, reuse, operation, maintenance, or disposal of the products or services. Examples of environmentally preferable products include cleaning products that are non-toxic, non-volatile, and biodegradable; and paint with no or low volatile organic compounds. This program is managed by EPA which maintains a database of products and specifications defined by federal, state, and local agencies, and other nations. The database can be found at http://www.epa.gov/epp along with EPA's Guidance on the Acquisition of Environmentally Preferable Products and Services located at http://www.epa.gov/epp/pubs/index.htm

E. Electronic Product Environmental Assessment Tool (EPEAT) Products

EPEAT is a tool for evaluating the environmental performance of electronic products throughout their life cycle. EPEAT is intended to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products. Available at: http://www.epeat.net/

F. Water-Efficient Products

A water-efficient product is in the upper 25% of water efficiency for all similar products, or is at least 10% more efficient than the minimum level meeting U.S. Federal Government standards. Examples of products that have met the EPA WaterSense label include: high efficiency toilets, sink faucets, showerheads, urinals, and landscape irrigation systems. Information about the WaterSense Program is available at www.epa.gov/watersense.

G. Non-Ozone Depleting Substances

E.O. 13423 and the Council on Environmental Quality (CEQ) Implementing Instructions require that each agency give preference to the purchase of non-ozone depleting substances, as identified in EPA's Significant New Alternatives Policy (SNAP) program. FAR

23.803 states that agencies shall give preference to the procurement of alternative products that reduce overall risks to human health and the environment by lessening the depletion of ozone in the upper stratosphere. It further requires that in preparing specifications and purchase descriptions, and the acquisition of supplies and services, agencies shall comply with the requirements of the Clean Air Act and substitute safe alternatives to ozone-depleting substances.

SNAP provides lists of acceptable and unacceptable substitutes in the following sectors:

fire suppressants, aerosol solvents and propellants, refrigeration and air conditioning equipments, and adhesives and coatings. SNAP is managed by EPA. Information about the SNAP Program is available on http://www.epa.gov/ozone/strathome.html

H. Alternative Fuel Vehicles and Alternative Fuels

Under EPAct, alternative fuel vehicles are defined as any dedicated, flexible-fuel, or dual-fuel vehicle designed to operate on at least one alternative fuel. As defined by EPAct, alternative fuels are substantially non-petroleum based fuels and include (but are not limited

to) the following: ethanol at a 85% blend or higher (E85); liquefied petroleum gas (propane);

compressed natural gas (CNG); biodiesel; electricity; hydrogen; and P-series fuels. DOE's FEMP manages this program. Information on these federal fleet requirements can be found at http://www1.eere.energy.gov/femp/program/fedfleet_requirements.html.