00818M1301 REV 10 Drawing.pdf
PDF 472 KB Posted
- Attached to
- CVM Cargo Rails Federal contract opportunity
- Solicitation number
- N0042122T0014
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N0042122T0014 1155.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
2345678
C
B
D
A
C
B
5 1
D
37 468 DWG
NO
SH REV
.25 .25
.37
.25
.25
(3.100)
76.50
1.77
2X .25
2X .25
4X R.38
4X R.25
2X 1.00
2X 1.75
2X .68
8X R.25
2.000 20X 3.625 (=72.500)
21X 1.46
2X .25
.255 +.010 -.000
.50
1.13
.175
2X .16
R.09
ALL AROUND .125
.56
1.750 .675
.13
.13
8X R.25
4X .31
4X .31
.81
19X 3.63 (=68.88)
20X .25
20X 1.27
80X R.25
20X 2.00
.37
2.60
C1
B1
C7
B7
B4
B3
REVISION HISTORY
DATEAPPROVERORIGINATORDESCRIPTIONREV
2021-02-09M. HEALYA. HARRISON SEE ECN-00818M130110
APPLICATION
NEXT ASSY USED ON
00818M1201 CV-22
AIRCRAFT PROTOTYPE SYSTEMS DIVISION 5.4.6
UNLESS OTHERWISE SPECIFIED,
DIM ARE IN INCHES.
TOL ON ANGLE 1
2X .03, 3X .010
INTERPRET DIM AND TOL
PER ASME Y14.5 - 2009
SURFACE FINISH 125
PROJECT NUMBER
NAVAL AIR WARFARE CENTER - AIRCRAFT DIVISION
PATUXENT RIVER, MARYLAND 20670008-18
DRAFTER A. HARRISON 2018-04-16
TITLE:
CARGO ROLLER RAIL
CV-22 CARGO ROLLER RAILS
CHECKER SIGNATURE ON FILE
ENGR A. KONNEKER 2018-04-12
STRESS - -
THIRD ANGLE PROJECTION MECH
APPVL - -
ELEC
APPVL - - SIZE CAGE CODE DRAWING NO. REV
D 02591 00818M1301 10
SCALE:1/1 SHEET 1 OF 2RESERVED FOR CM
PARTS LIST
FNSPECIFICATIONDESCRIPTION PART NUMBERCAGE
QTY
-7075-T651 AL ALY (AMS4045)CARGO ROLLER RAIL00818M1301-10102591\
-7075-T651 AL ALY (AMS4045)CARGO ROLLER RAIL00818M1301-10302591\
DISTRIBUTION STATEMENT C:
DISTRIBUTION AUTHORIZED TO U.S.
GOVERNMENT AGENCIES AND THEIR
CONTRACTORS ONLY PER DOD 5230.24,
(10-04-14). OTHER REQUESTS SHALL
BE REFERRED TO THE PROGRAM
EXECUTIVE OFFICE, CODE PMA-275.
DESTRUCTION NOTICE:
DESTROY BY ANY METHOD THAT WILL
PREVENT DISCLOSURE OF CONTENTS OR
RECONSTRUCTION OF THE DOCUMENT.
00818M1301 1 10
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. ANODIZE PER MIL-A-8625, TYPE I, CLASS 1.
3 PRIOR TO PRIME AND PAINT, MASK AREAS APPROXIMATELY AS SHOWN.
4. PRIME IAW NAVAIR 01-1A-509-2 USING MIL-PRF-23377, TYPE 1,
CLASS C2 EPOXY PRIMER.
5. FINAL FINISH IAW NAVAIR 01-1A-509-2 USING TWO (2) COATS
MIL-PRF-85285 TYPE I POLYURETHANE TOPCOAT, COLOR NO. 37038
(BLACK) IAW FED-STD-595.
6 APPLY A-A-59166 TYPE II, COLOR 37038 (BLACK), NON-SLIP COATING
TO AREA INDICATED IAW MANUFACTURER'S INSTRUCTIONS.
7 MARK WITH INDELIBLE INK OF CONTRASTING COLOR IAW MIL-STD-130
AT LOCATION INDICATED: 02591-00818M1301-101 AND -103, RESPECTIVELY.
-101 CARGO ROLLER RAIL
DIMENSIONS SAME BOTH SIDES
DIMENSIONS SAME BOTH SIDES
FOR -101 AND -103
SEE DETAIL B
-101 PICTORIAL VIEW
SCALE NONE
SECTION A-A
TYPICAL FOR -101 AND -103
DETAIL B
SCALE 2/1
21 PLACES FOR -101 AND -103
2X R
ALL AROUND
ALL AROUND
Kayla.Markel New Stamp
A
2345678
C
B
D
A
C
B
5 1
D
37 468 DWG
NO
SH REV
2X .25
.25
(3.100)
4X R.38
4X R.25
77.48
4X R.25
1.00
.68
1.75
1.600 20X 3.750 (=75.000)
1.77
21X 1.46
.460
.300
2X R.18
.37
.25 .25
.25
.25
.460
2X .25
20X .25
20X 1.27
20X 2.13
19X 3.75 (=71.250)
80X R.25
.81
2.60
2X .35 X 45
B1
C1
SIZE CAGE CODE DRAWING NO. REV
D 02591 00818M1301 10
SCALE:1/1 SHEET 2 OF 2
RESERVED FOR CM
00818M1301 2 10
-103 PICTORIAL VIEW
SCALE NONE
-103 CARGO ROLLER RAIL
DIMENSIONS SAME BOTH SIDES
SEE DETAIL C
ALL AROUND
DETAIL C
SCALE 2/1
2X .03 X 45
ALL AROUND
SECTION A-A
SEE DETAIL B
Kayla.Markel New Stamp
| Sheet 1 |
| Views |
| new_view_1 |
| right_2 |
| top_3 |
| new_view_6 |
| right_7 |
| B |
| bottom_9 |
| Zones |
| A1 |
| Sheet 2 |
| Views |
| new_view_12 |
| new_view_21 |
| top_22 |
| bottom_25 |
| C |
| right_31 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .